Yarı römork

Wiese Baustoffauflieger - Heckkran Kran Fassi

Wiese Construction Material Semi-Trailer
Weights:
Kingpin load: 12,000 kg
Axle load: 27,000 kg
Permissible gross weight: 39,000 kg
Unladen weight: 10,840 kg
Length:
Loading platform length: approx. 9,200 mm
Overall length: approx. 10,600 mm
Width:
Internal width: 2,480 mm
Overall width: 2,550 mm
Kingpin:
1 position with 2" kingpin
Coupling height:
In horizontal position approx. 1,160 mm
Dcedpfx Asw Tgcwjh Nsn
Top edge of main beam (without floor):
Approx. 1,380 mm
Loading height:
Approx. 1,410 mm
Lashing hole - outer frame D=30 mm with perforated strip in the slope
(160 mm high/30 mm floor drop/4 mm wall thickness)
Main beam spacing:
980 mm (center to center) - 1,130 mm (outside to outside)
Axles:
3 axles, each with 9,000 kg load capacity
Brand: SAF with disc brakes D=430 mm
Track width: 2,040 mm
ABS: 1 axle with sensor
Axle spacing: approx. 1,510 mm / approx. 1,510 mm
Suspension:
Original SAF air suspension, with lift-lower valve
with safety cables
Axle lift:
Axle lift for 1st axle, automatically load-dependent as starting aid
Switchable via button in the cab
Steering:
Mechanical forced steering on axles 2 + 3
Two-rod steering by Tridec
Brake system:
2-line Wabco compressed air brake system in accordance with EU directives 71/320/EEC et seq. with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket
1x ISO coupling head yellow
1x ISO coupling head red
Spring-loaded parking brake on 2 axles
All fitted with quick couplings
Aluminum air tanks
Air system:
Compressed air installation with:
1x lift / lower valve
1x level control valve
Aluminum air tanks
All fitted with quick couplings
Automatic lowering of air suspension for crane operation
Tyres:
6 units type: 385/65 R22.5"
Brand: as per manufacturer’s choice
Tyre pressure monitoring system for 6x tyres, display in cab
Rims:
6x steel rim 11.75x22.5", 10-bolt, hub-centered, offset: 120 mm
Support device:
Mechanical landing legs with T-swing foot, permissible lifting load: 2x 12,000 kg
Operable from one side, 2 speeds
Brand: as per manufacturer’s choice
Wheel covers + mud flaps:
6x plastic half-shell wheel covers
Fender mounts reinforced with flat steel
Note: Fender on steering axle 3 cut out on the inside
Lighting:
24V lighting system in accordance with EU directives 76/756/EEC et seq. with:
2x multi-chamber rear lights
Lane marker lights
License plate illumination
LED side marker lights with flashing function
2x 7-pin and 1x 15-pin sockets connected as per EU standard
Tail lights mounted on a reinforced light bracket = certified rear underrun protection
All necessary markings
Additional installation:
Electrical interface for crane control prepared as specified!
Safety equipment:
Lateral underrun protection and rear underrun protection made of aluminum in accordance with EU directives
Floor:
OKULEN floor 32 mm
Body:
Straight front wall, 1,200 mm high, solid-welded, made of 4 steel profiles,
Welded to the front plate with aluminum hollow section infill
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stakes K20/1,100 mm high for unobstructed through-loading
Straight rear wall, 1,100 mm high, solid-welded, made of 4 steel profiles,
Welded to rear plate with aluminum hollow section infill
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stakes K20/1,100 mm high for unobstructed through-loading,
2x3 aluminum sideboards 1,100 mm, foldable and lowerable
Foldable steps integrated in the rear sideboards, left and right, as access aids
and gra

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.