Alçak şasi dorseMÜLLER-MITTELTAL
TS 4-VLL-Tele 3x gelenkt ausziehbar Rampen
Alçak şasi dorse
MÜLLER-MITTELTAL
TS 4-VLL-Tele 3x gelenkt ausziehbar Rampen
sabit fiyat KDV hariç
€69.000
(€82.110 brüt)
Durumu
Kullanılmış
Konum
Landsberg am Lech 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€69.000
(€82.110 brüt)
- Satıcının konumu:
- Robert-Bosch-Str. 10, 86899 Landsberg am Lech, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 42.270 kg
- Toplam ağırlık:
- 58.000 kg
- Dingil konfigürasyonu:
- 3 aks
- Ilk tescil:
- 06/2016
- Bir sonraki muayene (TÜV):
- 07/2025
Teklif detayları
- Listeleme kimliği:
- A199-66-810
- Son güncelleme tarihi:
- 10.09.2025
Açıklama
Steering completely overhauled, all joints and tie rods renewed.
With air suspension, hydromechanical forced steering, single telescopic loading platform, with rear bevel and drive-on ramps.
Dimensions: B 11,450 mm
Unladen weight: 15,730 kg
STZ-L Gooseneck
- Robust welded steel construction
- Constructed loading platform 3,900 x 2,480 mm
- Hydromechanical forced steering (dual-circuit steering)
- Fifth-wheel plate mounted on ball bearing turntable with replaceable 2" king pin and adjustable steering wedge
- Mechanical landing gear at the front
Loading Platform
- Single telescoping design, executed as an external/internal tube construction with a fixed 500 mm long front segment
- 350 mm sliding table on the inner tube, adjustable and lockable
- Extension stages lock via spring-loaded cylinders and tapered bolts
- 1 pair of wheel recesses after the 1st axle, depth 450 mm
Chassis
- Air-suspended 4-axle chassis
- 1st axle rigid, liftable
- BPW axle unit (Eco), consisting of three hydromechanically force-steered steering axles
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
- Lifting and lowering valve standard for lowering to min. 825 mm or raising to max. 1025 mm
- Loading height 890 mm
- Excavator arm recess 2,600 mm long, 670 mm wide
Vehicle Rear
- Version "Beveled 500 mm"
- Short 1,240 mm rear overhang from the center of the last axle
Bjdpfx Ahjxbm I Ij Hsww
- Hydraulic rear support
Drive-on ramps
- Two-piece drive-on ramps, length 2,850 mm / 1,540 mm, width 720 mm
- Hydraulic ramp adjustment
Brake System
- Two-line full air brake system with diaphragm brake cylinders
- Automatic load-proportioning brake (ALB)
- Automatic slack adjusters (AGS)
- Parking brake via spring-loaded cylinders
- ABS brake
Special Equipment
- Wheel recess
- Excavator arm recess
- Extendable widenings
- Central lubrication system "BekaMax"
Technical Data
Gooseneck
Loading area (L x W): 3,900 x 2,480 mm
700 mm wedge-shaped slope
Fifth-wheel height loaded: 1,250 mm
Loading Platform
Nominal loading area (L x W): 8,500 x 2,550 mm
Telescopic extension: 3,000 mm
Stage-adjustable to (L x W): 11,500 x 2,550 mm
Steering
1st axle: rigid, liftable
2nd-4th axles: hydromechanically forced-steered (dual-circuit steering)
Radio remote control
Electrohydraulic power unit
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
With air suspension, hydromechanical forced steering, single telescopic loading platform, with rear bevel and drive-on ramps.
Dimensions: B 11,450 mm
Unladen weight: 15,730 kg
STZ-L Gooseneck
- Robust welded steel construction
- Constructed loading platform 3,900 x 2,480 mm
- Hydromechanical forced steering (dual-circuit steering)
- Fifth-wheel plate mounted on ball bearing turntable with replaceable 2" king pin and adjustable steering wedge
- Mechanical landing gear at the front
Loading Platform
- Single telescoping design, executed as an external/internal tube construction with a fixed 500 mm long front segment
- 350 mm sliding table on the inner tube, adjustable and lockable
- Extension stages lock via spring-loaded cylinders and tapered bolts
- 1 pair of wheel recesses after the 1st axle, depth 450 mm
Chassis
- Air-suspended 4-axle chassis
- 1st axle rigid, liftable
- BPW axle unit (Eco), consisting of three hydromechanically force-steered steering axles
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
- Lifting and lowering valve standard for lowering to min. 825 mm or raising to max. 1025 mm
- Loading height 890 mm
- Excavator arm recess 2,600 mm long, 670 mm wide
Vehicle Rear
- Version "Beveled 500 mm"
- Short 1,240 mm rear overhang from the center of the last axle
Bjdpfx Ahjxbm I Ij Hsww
- Hydraulic rear support
Drive-on ramps
- Two-piece drive-on ramps, length 2,850 mm / 1,540 mm, width 720 mm
- Hydraulic ramp adjustment
Brake System
- Two-line full air brake system with diaphragm brake cylinders
- Automatic load-proportioning brake (ALB)
- Automatic slack adjusters (AGS)
- Parking brake via spring-loaded cylinders
- ABS brake
Special Equipment
- Wheel recess
- Excavator arm recess
- Extendable widenings
- Central lubrication system "BekaMax"
Technical Data
Gooseneck
Loading area (L x W): 3,900 x 2,480 mm
700 mm wedge-shaped slope
Fifth-wheel height loaded: 1,250 mm
Loading Platform
Nominal loading area (L x W): 8,500 x 2,550 mm
Telescopic extension: 3,000 mm
Stage-adjustable to (L x W): 11,500 x 2,550 mm
Steering
1st axle: rigid, liftable
2nd-4th axles: hydromechanically forced-steered (dual-circuit steering)
Radio remote control
Electrohydraulic power unit
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2025
İstek gönder
Telefon & Faks
+49 8191 ... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu


























































