Çalışma platformlu römork

ES-GE Tandem-Anhänger Bordwände, CV, Rungen

You can find our complete inventory of immediately and short-term available vehicles on our website.

Excerpt from the equipment list. Full specifications available upon request.

Chassis
* Steel welded construction made of welded longitudinal beams and punched Z cross members
* Close cross member spacing for high floor load capacity
* Ramp storage between longitudinal beams behind the axle aggregate
* Two insertion pockets beneath the loading floor for one access ramp each, with locking plate in the rear end frame

Front support
* Support winch with single-side operation

Towing device
* Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN
* Height adjustment of approx. +/- 150 mm

Rear support
* Two adjustable drop legs

Undercarriage
* 2 x 7 t air suspension axle unit, brand SAF
* Drum brake approx. 300 x 150 mm
* 10-hole hub-centered wheel connection for single tires
* Total air suspension lift approx. 180 mm, of which raising approx. 150 mm and lowering approx. 30 mm
* Manual control lever with locking function

Tires
* Four-fold, 285/70 R 19.5 – brand at our discretion
* On steel rim 8.25 x 19.5, brand at our discretion

Mudguards
* PVC spray guards front and rear of the axles
* According to EC, with rear mud flaps

Load securing
* On the outer frame, load lashing points every approx. 200 mm for tie-down straps, lashing capacity approx. 2.5 t
* 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8,000 daN
* Post pockets for drop-in posts 80/50
* 3 pairs of post pockets in the outer frame, evenly distributed
* 4 rows of post pockets across the loading area, evenly distributed

Braking system
* Compressed air braking system according to EC with EBS and one coupling head red/yellow on the connection plate at the drawbar
* As connection to the towing vehicle, one double-coil with one coupling head red/yellow and one Duomatic coupling each
* Spring-loaded parking brake acting on one axle

Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame
* With sheet metal cover in the wheel arch area
* Floor load capacity: suitable for forklift traffic up to approx. 5 t

Container locks:
* Container locks for 1 x 20 ft. according to ISO 1496, EN 284 or EN 452-1
* Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452

Lighting
Blsdpfx Ahsxc Axxo Hop
* Lighting system according to EC, 24 volts
* Multi-chamber rear lights, license plate lights, side marker lights and outline marker lights at the rear
* Connection plate at the drawbar incl. connecting cable with 15-pin and 2 x 7-pin plugs

Accessories included
* 1 plug-in rotating beacon at the rear with continuous light registration
* Additionally, with switch: 2 LED reversing lights at rear, mounted on lamp bracket, switched via reverse gear
* Side and rear welded-on forklift impact protection
* 1 x stainless steel toolbox each left and right behind the axles
* 6 x 25 cm drop sides (3 per side) and front/rear wall made of anodized aluminum hollow profiles, approx. 600 mm high
* Drop sides foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm)
* Side/Rungen magazine in front at bulkhead
* 1 additional mounting plate incl. parking sockets for air / electrics / EBS

Paintwork
* Chassis hot-dip galvanized
* Drop sides RAL 9010 pure white
* Hubs KTL-black
* Underride protection RAL 9010 white
* Rims RAL 9006 silver
* Various add-on parts: hot-dip galvanized/KTL-black

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.