Çalışma platformlu yarı römork

FAYMONVILLE MAX410 Ballastauflieger

Durumu: yeni, toplam ağırlık: 73.000 kg, azami yük ağırlığı: 61.050 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specification available on request. Loading Platform: * Loading platform with approx. 30 mm hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, each technically rated to 12,000 kg * 1st axle self-steering, 2nd axle fixed, all other axles hydro-mechanically force-steered, mounted on turntable * Air suspension with lift/lower valve * Axle tool Tyres: * Tyres: 445/65 R 22.5 169K – manufacturer of our choice, TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via standardised EBS interface in accordance with ISO 11992 * To ensure correct display, the tractor unit must be able to transmit and display these data Braking System: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Electrical System: * Electrical installation according to EU regulations * 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure is automatically blast-cleaned after welding using a shot-blast machine * Second blasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating: 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to the RAL 841GL system * Rear end metallized and painted in RAL 9010 (Pure White) * Wheels painted silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * No metallic paint possible Including the following accessories: * Loading area with approx. 30 mm hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * Supports for approx. 1,000 mm plug-in stakes in the rear center beam * Swanneck and rear apron both left and right fitted with a holder for warning signs including socket * Remote steering from front and rear via wired remote with push buttons, single-track axle control (no installation required in tractor unit) * Electro-hydraulic unit * 13 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the bed * Lift axle on first and second axles with control via TEBS E, depending on actual axle load and loading condition * 7 pairs of galvanized plug-in stakes approx. 100 x 50 mm, approx. 1,000 mm high Dedpsw Tpr Ujfx Af Teku * 5 pairs of crosswise stake pocket rails mounted on platform for plug-in stakes approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading area for 1x10’ * 1 shunting coupling reinforced, screwed to rear crossmember * Centralized lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protector * Hydraulically...