Alçak yükleyici yarı römork

Faymonville MAX Trailer 4-Achs-Tele-Semi-hydr-Rampen

For every used semi-trailer, you receive a current and comprehensive inspection and functional report.

Neck:
- Gooseneck with rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick

Extendable Deck:
- Extendable loading platform with rear taper approx. 1,000 mm x 8°
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of flat-lying lashing rings at the front of the deck (LC 10,000 daN)
- Recesses in the outer frame of the deck for attaching tension belts (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over the axles covered with tread plate

Two-Part Steel Ramps:
- One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulic foldable sections, hydraulic lifting gear, and hydraulically adjustable position
- Maximum load per pair: 40,000 kg

Axles and Tyres:
- BPW axles, two rigid, two self-steering axles, air suspension, drum brakes, axle lift/lowering function
- Self-steering axles with electromagnetic reverse lock, can be activated via reverse gear or manually
- Axle tools
- Tyre size: 235/75 R 17.5
- TPMS tyre pressure monitoring system compliant with ECE R 141

Accessories included:
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder in front of the front wall
- Yellow-red air couplings on the galvanized connector strip at the front
- 4 wheel chocks with holder on the front wall
- Receptacle at the rear of the gooseneck for aluminium drive-up ramps
- Galvanized folding supports under the rear taper of the deck
- Holder for a rotating beacon at the rear of the trailer
- Cover plates bridging the gap between ramps and loading platform
- White reflective tape according to EU regulations on the sides, extension, and red on the rear
- Electro-hydraulic unit mounted under the loading platform at the rear
- On the gooseneck and ramps, left and right, a holder for warning panels, including socket
- Ramp control valves mounted on the right side of the trailer
- One mud flap at the rear of the trailer
- European reflector boards (red-yellow) at the rear of the trailer
- Removable ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized stanchions are removable (body length approx. 2,560 mm)
- 4 pairs of WADER container pockets in the deck for one 20ft, two 20ft, or one 40ft container
- 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the deck
- Zinc-plated deck extensions, extendable by approx. 230 mm each side
- Lift axle on front axle with control via TEBS E, depending on current axle load and loading status
- Square anti-slip profiles 20 x 20 mm every 200 mm on the outer frame of the deck taper
- Painted sand layer on the tread plates of the gooseneck and deck for anti-slip protection
- Central lubrication system BEKAMAX (Pico), with NLGI-2 standard grease and removable pump guard
- Four outward-extending warning panels approx. 423 x 423 mm with position light, extendable by approx. 400 mm each
Gksdpfx Asxm Rlueacjc
- Warning panel brackets for rotating beacon
- 80 km/h speed stickers on the rear and both sides
- Load pressure gauge for determining axle loads, including load chart

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.