Brandalı açık yarı römork

KÖGEL S24-1*Volumen-Pritschensattelanhänger*10x vorhan

VIN: WK0S0002400300637

Permissible fifth-wheel load: 12,000 kg
Permissible bogie load: 24,000 kg (8,000 kg per axle)
Technically possible bogie load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Internal loading floor length: approx. 13,620 mm
(G) Internal loading floor width: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Loading height unladen, horizontal position: approx. 1,030 mm
(H2) Loading height laden, horizontal position: approx. 1,000 mm
(H3) Achievable ramp height at rear with king pin height 910 mm, loaded, raised: approx. 1,190 mm
Riding height set to 265 mm.
(K) Internal side through-loading height: front approx. 2,735 mm - approx. 2,860 mm [adjustable in 5 x 25 mm increments], rear approx. 2,810-2,860 mm [adjustable in 1 x 50 mm increments]
(K1) Internal height under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable in 5 x 25 mm increments], rear approx. 2,950 mm - approx. 3,000 mm [adjustable in 1 x 50 mm increments]
(X1) Overall height unladen, horizontal driving position: = H1 + K + T +/- upper structure height adjustment | = S + P + K + T +/- height adjustment
Superstructure settings: The “Mega” body structural design allows height adjustment of 5 x 25 mm at the front and 1 x 50 mm at the rear. The relevant heights (overall height, internal side through-loading height, internal height) change according to the selected superstructure setting.
(T) Roof side body height: approx. 180 mm. Due to the roof beam's design, the internal pallet width beneath the roof corresponds to the specified internal roof height.
(N) Front overhang (in accordance with ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Body height above the fifth wheel: approx. 90 mm
(S) Fifth wheel coupling height unladen can be set: approx. 940 - 1,070 mm, set horizontal at approx. 940 mm (note overall height!)

Frame
Regular ladder frame in lightweight steel construction with inserted cross-members. Cover plate between outer frame and longitudinal beams serving as tire protection for the tractor unit’s rear wheels. 8 mm coupling plate with a 2" king pin according to DIN 74080/ISO 337.

Kedexxxr Hopfx Afnodw
Chassis
Axle lift mechanism on axle 1. Automatic, load-dependent axle lift control. Start assist: activation by braking 3 times, 30% overload up to a speed of 25 km/h. Three-axle SAF INTRADISC bogie with Ø 370 mm disc brakes, ET 120. Air suspension with 260 mm travel.

Chassis attachments
JOST landing legs, mechanical with compensating foot, 24 t lifting capacity. Single-side operation facing right in driving direction. Lateral protection in accordance with ECE-R73. Two large waterproof plastic toolboxes, internal dimensions approx. 923 x 422 x 460 mm. Installed at the rear, one left and one right. Extending access ladder rear right. Low, rigid rear underrun protection made of steel according to ECE-R58. Underrun profile height at least 120 mm, designed for increased test loads.

Brake/air suspension system
WABCO EBS system. Air suspension system incl. 1 lift

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.