Çalışma platformlu yarı römork

KÖGEL Multi Chassis, verstärkt, Bordwände

You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.

Excerpt from the equipment. Full specification available on request.

Chassis
* Regular ladder-type frame in lightweight steel construction with continuous cross members
* 8 mm thick coupling plate, fitted with a double-traction fifth wheel kingpin according to DIN 74080 / ISO 337

Running Gear
* Axle lift mechanism on axle 1
* Chosen brand: Kögel – three-axle assembly with disc brakes Ø 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm travel

Vehicle Tyres
Codpfx Abjx Dgikobehf
* 6-fold tyres 385/65 R 22.5 UNIROYAL TH 50

Chassis Attachments
* Landing gears (brand at choice by Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right in the direction of travel
* Splash guard system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle assembly with 385/65 R22.5 tyres, consisting of 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mud flaps between the 1st and 2nd axle, and 1 pair of quarter-circle mudguards with mud flaps behind the axles
* Storage box for: 10 side boards, drop-in stanchions, and rear doors or flap. Fully enclosed, splash-proof, also serves as lateral safety device
* Ground clearance (front): 220 mm
* 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Fitted at the rear, 1x left and 1x right
* High, fixed rear underride guard made of steel according to ECE-R58
* 1 pair each of extendable warning panels for oversize loads, retroreflective red/white, with LED lighting, spiral cable and connector. Positioned at the front and rear of the vehicle

Brake/Air Suspension System
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connector via ISO 7638 plug
* WABCO EBS system
* Air suspension system incl. 1 raise/lower valve, mounted left in driving direction behind the axle assembly. Driving level sets automatically
* 2 fail-safe coupling heads at the front ISO 1728 34410.010. Air tanks for brake system and air supply made of steel (EN 286-2)

Floor
* Panel floor approx. 30 mm thick
* Perimeter-sealed floor
* Socket pockets for square tube stanchions approx. 80 x 80 mm, arranged as per drawing J9: 8 rows of stanchion pockets (18 sockets per row: 4 exterior + 10 central per row)

Superstructure
* Complies with body stability requirements to EN 12642 XL (VDI 2700). Certified for a payload of approx. 27,000 kg

Front wall
* Holder for up to 14 square tube stanchions approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall height approx. 2,000 mm with steel volume stanchions, profiled sheet steel, bolted/riveted to frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640

Rear wall
* Fold-down rear wall approx. 600 mm made of aluminium hollow profiles with 3 tie rods and T-bolt locks, 2 folding steps on the inside
* Folding steel corner stanchions at rear in side wall height

Side wall
* 4 pairs of drop-in stanchions at side wall height 43540.380 VarioFix steel perforated outer frame
* 4 pairs of stanchion holders for drop-in stanchions on the outer frame (evenly distributed)
* 24 pairs of lashing rings in

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.