Çalışma platformlu yarı römork

KÖGEL 3-Achs-Mega Chassis

You can find our complete inventory of vehicles, including immediately and soon available units, on our website.

Excerpt from the equipment list. Full equipment details available upon request.

Chassis:
* Standard ladder frame in lightweight steel construction with push-through cross members
* Chassis frame with camber
* Cover plate between outer frame and longitudinal beam as tire protection for the rear wheels of the tractor unit
* Coupling plate approx. 8 mm thick with a 2-inch kingpin according to DIN 74080 / ISO 337

Running gear:
* Axle lift mechanism on axle 1
* BPW three-axle unit ECO Air with disc brakes approx. Ø 370 mm, ET 120
* Air suspension with approx. 260 mm travel

Vehicle tires:
* 6-fold tires 445/45 R 19.5, 160J

Chassis attachments:
* Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in the direction of travel
* Tool-free folding side underrun protection on the right and left in the direction of travel
* Spare wheel carrier with winch incl. 1 wheel mounting kit, mounted behind the axle unit
* Mounting for 16 square tube stake pockets approx. 80 x 80 x 1,990 mm, installed laterally on the longitudinal beam, right and left in the direction of travel
* Waterproof plastic toolbox, inner dimensions approx. 545 x 400 x 400 mm, installed at the rear left in the direction of travel
* Extendable rear access ladder, right side
Gsdpox Tx Efofx Aa Esil

Brake / air suspension system:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines)
* Parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connector via ISO 7638 plug
* WABCO EBS system
* Air suspension system incl. 1 raise/lower valve, installed on the left behind the axle unit in the direction of travel. Driving position adjusts automatically.
* 2 foolproof coupling heads at the front, ISO 1728
* Steel air tanks (EN 286-2) for brake and air supply system

Floor:
* Board floor approx. 30 mm thick, multi-layer bonded plywood
* Rear section of floor caulked
* Pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 pockets per rail: 4 outer, 10 central per rail)

Front wall:
* Front wall approx. 2,000 mm high with steel volume posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) located on the front wall according to EN 12640. Note: when using the front wall for load securing, appropriate tension belts must be used for strapping if the vehicle is operated without sideboards and rear flap/door.
* Side wall VarioFix steel slotted outer frame without stake storage
* 24 pairs of lashing rings on the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring

Electrical / Electronics:
* Lamp bracket made of steel, positioned above underrun protection
* KÖGEL LUXIMA Premium Package, consisting of: LED license plate lighting, LED marker and front reflectors, flashing LED side marker lights, Superseal and bayonet lamp connectors
* 2 outline lights with arm, attached to the multi-chamber tail light
* 2 multi-chamber rear combination lights
* Fixed adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and a 15-pin socket ISO 12098
* Compact amber LED beacon with mounting tube, positioned on the lamp bracket. Switch integrated into the light

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.