Alçak şasi dorse

FAYMONVILLE Megamax Tiefbett 2x12 t PA

Excerpt from the equipment specification. Complete specification available on request.

Gooseneck
Gooseneck in SNT design for optimized loading platform length
Length approx. 3,750 mm
Hydraulically liftable/lowerable and detachable
Technical fifth wheel load: 25,000 kg
For tractors: 4 x 2, 6 x 2, and 6 x 4

Lowbed
Lowbed designed as a telescopic vessel deck in low-profile construction with front extension and mechanical locking
Length x width approx. 6,850 mm x 2,540 mm
Service lines are protected inside the extendable beams and automatically adapt to the respective lowbed length

Axles and Suspension
Pendulum axles, all axles hydro-mechanically force-steered, hose rupture valve for axle compensation, cylinders with automatic reset function
Hydraulic cylinders with shut-off valves and guide pins for securing in raised position
Technical axle load: 12,000 kg each
Hydraulic axle compensation

Tyres
245/70 R 17.5

Rear Chassis
Rear chassis with closed outer frame, checker plate cover, and full-length prismatic excavator recess approx. 1,250/700 x 505 mm, open at the rear

Brake System
WABCO EBS-E brand brake system to EU regulations, without connecting cables to the tractor unit

Paintwork
Trailer color: RAL 3002 Carmine Red

Included Accessories
Removable front wall, steel, approx. 400 mm high
3 kW electro-hydraulic unit for hydraulic operations (excl. hydraulic winches), without supply line installation on tractor
Outer beams of the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN)
2" kingpin
One locking point every approx. 500 mm on the extension
1 pair of steel ramps with climbing strips and locking bolts for bridging the lowbed mounting hooks
1 lashing ring each left and right on the front crossbeam (LC 10,000 daN)
Lashing rings with retaining spring every approx. 1,200 – 1,300 mm on the outside of the inner beams of the loading platform
Lashing rings with retaining spring every approx. 1,200 – 1,300 mm on the outside of the outer beams of the loading platform (LC 10,000 daN)
Cutouts above the lashing rings in the top flange of the outer beams
1 hanging lashing ring each left and right on the rear crossbeam (LC 10,000 daN)
Preparation for removable loading floor on the outer beams of the loading platform
Bracket at the front of the rear chassis for loose approach ramps for the lowbed
Chassis with chamfered corners at the rear
Bracket for loose aluminium approach ramps at the vehicle's rear traverse
Remote axle steering from both front and rear, operated via cable remote with push-buttons, including axle tracking control, without installation on tractor
Mechanical pin-and-eye coupling from lowbed to chassis, allowing exchange of loading platform or installation of extension beams, with electric-pneumatic-hydraulic couplings
Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
2 axle load gauges mounted on the left side

Hsdpfsx Uvllox Ah Djfb
Includes special equipment:
1 pair of plug-in aluminium sideboards on the gooseneck, approx. 400 mm high, anodised finish
1 plug-in aluminium rear wall on the gooseneck, approx. 400 mm high, anodised finish
Central lubrication system with 2 pumps, BEKAMAX brand
2 pairs of bolt-on lashing ...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.