Alçak şasi dorse

Faymonville MAX Trailer 4-A-Tele-Semi-Rampen-zwangsg

For every used semi-trailer, you will receive a current and complete inspection and functional report.

Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick

Extendable loading platform:
- Extendable loading platform with rear bevel of approx. 1,000 mm x 8°
- 5 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering

Axles and tyres:
- BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered
- Technical axle load: 12,000 kg
Giodpfxoyffd De Agdep
- Air suspension with lift/lower valve
- Tyres: 245/70 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141

Two-piece steel ramps:
- One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning
- Maximum load per pair: 40,000 kg

Accessories included:
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised connection strip at the front
- 4 wheel chocks
- One spare wheel
- Electro-hydraulic power pack
- Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles
- Mounting provision at rear of gooseneck for ALU approach ramps
- European reflective signs (red-yellow) at rear of trailer
- White reflective tape according to EU regulations at the sides, at the extension, and red at the rear
- On the gooseneck and ramps, left and right, a bracket for warning signs including socket
- One mount for a revolving beacon at the rear of the trailer
- Galvanised folding supports under the platform’s rear slope
- Control valves for the ramps mounted on the right side of the trailer
- Cover plates to bridge the gap between ramps and platform
- Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2
- On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
- Rear galvanised stub posts are removable (body length approx. 2,560 mm)
- One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap
- 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container
- 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform
- Galvanised platform extensions, extendable approx. 230 mm per side
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope
- Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition
- Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light
- Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring
- Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform
- 80 km/h speed stickers at the rear and on both sides

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.