Çalışma platformlu yarı römork

KÖGEL Multi Chassis, verstärkt, Bordwände

Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website.

Excerpt from the equipment. Full equipment details available upon request.

Chassis:
* Standard ladder-type frame in lightweight steel construction with through-bolted crossbeams
* Chassis frame with pre-camber
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin in accordance with DIN 74080 / ISO 337

Running Gear:
Duedpfjyh S I Ejx Ah Djn
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control. Start assist: activated by pressing the brake 3 times, 30% overload permitted up to a speed of 25 km/h
* Manufacturer of choice Kögel – three-axle unit with 430 mm disc brakes, offset approx. 120 mm. Air suspension with approx. 180 mm travel

Vehicle Tyres:
* 6-fold tyres 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L)

Chassis Attachments:
* Landing legs (manufacturer of choice by Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation, right side in direction of travel
* Spray suppression system in accordance with Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, consisting of 1 pair of quarter-circle mudguards in front of axles, 1 pair of straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair of quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holder
* Omission of standard side protection device
* Storage box for: 10 drop sides, folding stanchions, and rear door/panel. Fully enclosed and splash-proof, also serves as lateral protection device
* Ground clearance (front) approx. 220 mm
* 2 waterproof plastic toolboxes, interior dimensions approx. 545 x 400 x 400 mm. Mounted at the rear, one left and one right
* Omission of access ladder
* High, rigid rear underrun protection made of steel in accordance with ECE-R58
* 1 pair each (front and rear) retractable warning boards for oversized loads, red/white retro-reflective, with LED lighting, spiral cable and plug connection

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (no connecting lines), spring-type parking brake, external pneumatic connectors, plus external EBS diagnostic connection via ISO 7638 plug
* EBS system (manufacturer according to customer’s choice)
* Air suspension system incl. one raising and lowering valve, mounted left side behind the axle unit. Ride height self-adjusting
* 2 anti-swapping coupling heads at front ISO 1728
* Air reservoir for brake and air supply system made of steel (EN 286-2)

Floor:
* Flooring panels approx. 30 mm thick
* Perimeter-sealed floor
* Stanchion pockets for square tube stakes approx. 80 x 80 mm, arranged as per drawing J9: 8 stanchion pocket rails (18 pockets per rail: 4 each external + 10 centre)

Bodywork:
* Conforms to body strength in accordance with EN 12642 XL (VDI 2700). Certified for payload approx. 27,000 kg

Front Wall:
* Brackets for max. 20 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) inside front wall
* Front wall approx. 2,000 mm high with steel corner posts, profiled steel plate, bolted/riveted to frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640

Rear Wall:
* Folding rear panel approx. 600 mm made of aluminium hollow profiles with 3 tension rods and T-latch — (text truncated, please provide the remainder for full translation).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.