Silo yarı römork

O.M.E.P.S. CM 35 mieten, mietkaufen, kaufen

unused new vehicle

rent, buy, lease purchase

Full-service rental from 1,190 EUR per month (rental prices are tiered depending on contract duration)

Lease purchase example:
1,135 EUR net per month with a 48-month term, a special lease payment of 15,000 EUR net, and a final installment of 10,000 EUR net.

A) Technical specifications: Tank configuration:
- One horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn)
- Single-chamber tank, with 35,000 l capacity
- Tank warranty: 24 months from delivery date
- King pin 2" in accordance with standard 94/20/CE
Painting and labeling: Tank and subframe in RAL WHITE OMEPS
Operating parameters:
- Pressure vessel in compliance with the Pressure Equipment Directive PED 97/23/EC
- Wall thickness approx. 5 mm
- Test overpressure: 3.0 bar
- Operating overpressure: 2.0 bar
- Operating temperature: -40° to +80°
Filling options:
- 3 manholes DN 450 with swing and hinged dome lids
- Dome lids are sealed pressure-tight with four wing nuts each
- Dome cover support on top for storage
Supporting system:
- 2 mechanical landing legs at the front, Jost
- 2 product discharge cones with synthetic fabric fluidization insert
- Single discharge lines, DN 100 steel, rear outlet
- 2 pinch valves DN 100 AKO in the lines (operation LEFT SIDE)
- Discharge ball valve DN 100 with spray ring + Storz A at the end of each discharge
Air piping:
- 2.5° stainless steel air manifold mounted on the operator’s side (LEFT), running to the rear
- Airline runs to the front, including check valve and hose connector DN 65 for compressor with Storz-B coupling
- The air manifold contains ball valves for aeration, auxiliary air and fluidization
- 2" aeration line front left, configured as hose
- External air connector Storz C at the air pipe rear left
Pneumatic interface with blow-off valve at rear catwalk
- 1 exhaust silencer
Electrical system LED:
- All lights 24 Volt, wiring includes:
- 15-pin socket mounted in front of the coupling plate on the chassis
- Yellow side marker lights as per regulations
Nsdpfx Afsynqbaogewc
- Rear position lamps
- Front clearance lamps
- Rear license plate lamps
- Lights as per standard 97/28/CE-2007/35/CE
- 1 LED work lamp at discharge outlet +1 in rear toolbox
- 2 work spotlights with reverse light function at underrun guard
Including ladder and catwalk:
- 1 aluminium ladder mounted rear left
- 1 pneumatic aluminium safety scissor railing with locking mechanism connected to brakes
- 1 aluminium safety catwalk mounted along the left side of the tank
Discharge hose holders:
- 4 hose tube containers 5 m long, DN 200, aluminium, two on each side, single apertures, without hoses, compressor hose included
Impact protection:
- Lateral underrun protection in anodized aluminium on both sides per standard 89/297/CE
- Rear anodized aluminium underrun guard according to standard 2000/8/CE-2006/20/CE
- 2 multi-chamber rear lights mounted at swivel bearing height in aluminium brackets in compliance with standard 97/28/CE-2007/35/CE
Toolbox:
- 1 large toolbox with top-hinged lid integrated in the rear
Additional accessories:
- Coupling spanner
- 2 yellow plastic wheel chocks
Axle assembly:
- 3 single fixed axles SAF ET 120, disc brakes D. 430 mm
- Axle spacing is ...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.