Brandalı açık yarı römork

KRONE MegaLiner*BPW*Edscha*hydr. Hubdach 450 mm

DUO-Matic air coupling
Fifth wheel load: 12,000 kg
Axle load: 24,000 kg
Permissible gross weight: 36,000 kg
Technically possible: Axle load: 27,000 kg
Permissible gross weight: 39,000 kg
Unladen saddle height: 950 mm
Double-T longitudinal and center beams as well as outer frame
welded with cross members and cantilevers
Multilock outer frame with universal load securing options every 100 mm
Front build height: 82 mm (including floor and fifth wheel plate)
2" king pin (diagonal dimension: 2,040 mm)
Rear underride bar according to EC standards with round pipe, suitable for RoRo transport
Side protection device according to EC directive
For load compartment length: 13,620 mm (internal)
For load compartment width: 2,480 mm (internal)
Piggyback design with 4 grab edges (color coded), fixed underride guard with round pipe
Fixed side guard on both sides (foldable for rail operation not required!)
10 pairs of 81 x 81 mm stake pockets in the outer frame, plus
10 stake pockets 81 x 81 mm in the floor center
The first two rows of 3 (neck area) have a stake pocket depth of only 68 - 85 mm (for use of stakes, the depth is insufficient and the stakes may pop out during use!)
4 pairs of vessel lashing rings as per PREN 29367-2
Telescopic rear access ladder
Stainless steel toolbox left
3 axles, each with 9,000 kg load capacity
Axle group spacing = 7,650 mm
Track width: 1,965 mm
Wheelbase: 1,310 / 1,310 mm
BPW axle assembly with air suspension, total lift 200 mm
Brake drums, 360 x 200 mm (for 19.5" rim), BPW
with lift and lower function, 1 valve
BPW axles with split air bellows and center alignment
Wheels (rims) 6-hole, 445/45 R 19.5
Type: BO 13620, 30 mm strong, water-resistant bonded flooring,
Edges all around sealed, strength as per DIN 283,
Floor load capacity up to 7,000 kg forklift axle load
Tarpaulin frame type: AB 13620 AGG, dimensions 13,620 mm internal length x internal width as per stakes
LM universal outer rails, continuous, for sliding tarp and sliding hoops
Edscha sliding roof (175) with plastic joints
Build height 175 mm, slope 0 mm, designed for transport of pallet cages as per DIN 15155
Height internal left, lower edge outer rail front: 2,860 mm
Height internal left, lower edge outer rail rear: 2,860 mm
Internal height: 3,000 mm (internal)
Clear loading height at rear portal: 2,845 mm
Unladen total vehicle height at highest point approx. 4,067 mm (with above mentioned unladen saddle height)
Permissible total vehicle height of 4,000 mm is exceeded!
Permissible total vehicle height of 4,000 mm is exceeded!
Adhesive warning label "Take care high trailer" (DIN A4) on front wall.
Total vehicle height at highest point with air suspension deflated max. 4,000 mm in pocket wagon mode.

ATTENTION:
Bwsdpfx Asyra Rfsgwoi
Rail transport is only permitted within the side height dimensions (internal lower edge of outer rail front and rear), as specified in the construction description, approved for rail transport! Center stakes must be adjusted accordingly! Only this configuration is permitted for rail transport! Please observe strictly!
Rail approval Code XL
(for rail transport at speeds over 120 km/h up to 140 km/h)

Hydraulic lifting roof with total stroke of 450 mm,
can be raised separately on all 4 corner posts
Body height at front can be lowered by 120 mm from highest driving position (in one step), reduced roof stroke: 330 mm
Body height at rear can be lowered by 50 mm from highest driving position (in one step), reduced roof stroke: 400 mm
Rubber sealing lip on the

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.