Çalışma platformlu yarı römork

KÖGEL 3-Achs MEGA Sattelanhänger

Excerpt of Equipment

Frame

10110.190 Standard ladder-type frame in lightweight steel construction with through-bolted cross members.

10115.010 With pre-cambered chassis frame (recommended under the following operating conditions: platform, open body, and subsequent installation of a tarpaulin structure).

10140.010 Cover plate between outer frame and longitudinal beam as tire protection for the rear wheels of the tractor unit.

10300.108 Coupling plate approx. 8 mm thick, with a 2-inch fifth wheel king pin according to DIN 74080 / ISO 337.

Chassis

I 17140.020 Axle lift for 1st axle, without hill-start aid, fully automatic control, axle load-dependent, with switchable lowering function for the lift axle in any load state.

18330.251 Three-axle SAF INTRADISC module with disc brakes Ø 370 mm, ET 120. Air suspension with approx. 260 mm travel.

Vehicle Tyres

20540.540 6-fold 445/45 R 19.5, 160J tires

20865.160 6 steel rims 19.5 x 14.00, offset approx. 120 mm (ET 120)

Mounted Chassis Components

20110.010 Landing legs (manufacturer at Kögel’s discretion), mechanical with compensating foot, 24 t lifting capacity. Single-side operation on the right in the direction of travel.

22070.015 Side guard as per ECE-R73

I 25105.026 Spare wheel carrier with winch, incl. 1 wheel fastening set, installed in front of the axle assembly

I 25470.062 2 storage points for 8 square tube stanchions each, inside dimensions approx. 340 x 220 x 2,150 mm. Installed behind the axle assembly.

I 25620.011 Plastic, waterproof toolbox, internal dimensions approx. 545 x 400 x 400 mm. Installed at the rear left in the direction of travel.

27510.015 Rigid rear underrun protection made of steel, compliant with ECE-R58

Brake / Air Suspension System

32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic ports and external EBS diagnostic connector via ISO 7638 connector.

33420.040 Air suspension system incl. 1 raise/lower valve, installed to the left in the direction of travel, behind the axle assembly. Driving position adjusts automatically.

34320.001 2 polarity-safe coupling heads at the front ISO 1728
Isdjyvxazepfx Acyotd

34410.010 Air tank for brake system and air reservoir, made of steel (EN 286-2).

Floor

40510.120 Floor panel approx. 30 mm thick, multiply glued plywood

I 40513.020 All-around sealed floor

I 40541.080 8 rows of stake pocket rails for square tube stanchions approx. 80 x 80 mm, mounted crosswise to the direction of travel (1 row consists of 1 field with 5 pockets between outer frame and longitudinal beam and 1 field with 10 pockets between the longitudinal beams). Arrangement according to Kögel factory drawing.

Front Wall

I 41710.018 Front wall approx. 1,800 mm high with aluminum volume stanchions, riveted using aluminum hollow profiles, bolted/riveted to the frame. 2 pairs of lashing rings (permissible lashing force 1,000 kg per ring) on the inside front wall in accordance with EN 12640.

Rear Wall

I 42500.060 Folding rear wall approx. 600 mm made of aluminum hollow profiles with 3 tie rods and T-bolt locks, 2 folding steps on the inside.

I 42540.030 Bolt-on steel corner posts at rear, matching side wall height

Side Wall

I 43505.130 3 pairs of drop-in stanchions at side wall height

43540.208 VarioFix steel slotted outer frame

I 43542.010 The VarioFix steel slotted outer frame cannot be used f

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.