Alçak yataklı yarı römork inşaat makinesi taşımak için

Faymonville 4-(1+3)-A-Tele-Semi-Radm.-Rampen-Gummib.

Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm in length
- Rear of gooseneck tapering approx. 1,000 mm x 10°
- For tractor units: 6x2, 6x4, 8x4 short

Loading Platform:
- Extendable loading platform, length approx. 8,800 mm, with a rear taper of approx. 500 mm x 10°
- Recess in the loading platform as well as into the beveled section to accommodate the excavator boom, approx. 3,850 x 750 x 210/290 mm

Two-piece Steel Ramps:
- Pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide
- Ramps with rubber lining
- Hydraulically folding ramp tips
- Each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward
- "Super Grip" rubber flooring 25 mm thick and steel plate flooring approx. 5 mm as additional reinforcement on the loading platform slope
- Square climbing strips 20 x 30 mm, spaced approx. 200 mm apart on the outer frame of the ramp

Axles, Suspension, and Tires:
- BPW axles and suspension; 1st axle steerable, all other axles hydromechanically forced-steered
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Tires: 235/75 R 17.5
- TPMS tire pressure monitoring system

Accessories included:
- Removable steel front wall, approx. 400 mm high
- Yellow-red air couplings on the front connection strip
- 3 kW electro-hydraulic power pack for hydraulic operations control
- 1 spare wheel
- Outside beams of the gooseneck with fixing holes for bolted lashing rings
- First hole approx. 200 mm from the front, then every approx. 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in side ALU sidewalls, approx. 400 mm high, anodised
- On the gooseneck: 1 plug-in rear ALU wall, approx. 400 mm high, anodised
- Over the gooseneck approx. 40 mm thick hardwood floor, over the king pin checker plate covering
- 2" king pin
- Round NATO plug socket on the front connection strip
- 4 wheel chocks
- Mechanical landing legs
- On the loading platform: continuous and between the axles interrupted approx. 50 mm thick hardwood floor
- Locking of the loading platform with conically welded locking profiles every 250 mm
- Includes preload plate
- 1 intermediate table approx. 300 mm wide
- 1 pair of lashing rings on the front crossbeam
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, folding outwards
- Extendable (galvanised) widenings by approx. 230 mm per side
Lhsdpfx Ajywizfof Dod
- Wheel wells with square climbing strips, 15 x 15 mm, fully open in front of the axles up to the gooseneck crossbeam, approx. 700 x 410 mm
- Lockable aluminium elements on the telescopic tubes of the widenings
- Widenable U-profiles for laying in the ALU covers
- Wheel wells with square climbing strips, 15 x 15 mm, between 1st and 2nd axles, approx. 1,480 x 700 x 410 mm
- ALU covers for the wheel wells
- Lockable aluminium elements on the telescopic tubes of the widenings
- 1 pair of mechanical rear supports
- Radio and cable remote control
- Front axle lift axle
- Square climbing strips 20 x 30 mm
- Central lubrication system
- Wabco Smart Board system
- 4 warning boards, approx. 423 x 423 mm, extendable

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.