Frigorifik yarı römork

KRONE SDR 27 eL4-MT**ThermoKing*Zusatzverdampfer*LiftA

Fifth wheel height unladen: 1,150 mm
Pallet/storage box
3 axles each with 9,000 kg load capacity
KRONE axles with air suspension and disc brakes, ET 120
Brake disc diameter: 430 mm
Rjdpsyytw Nefx Ad Tjr
With lifting and lowering mechanism
Fully automatic load-dependent electronic lift axle control for the 1st axle
Loading floor
Type: BO 13310
Low-noise aluminium floor tray, PIEK-compliant
Floor load capacity tested according to EN 283, rear section extra reinforced
Box body:
Cool Liner Multitemp body (Duoplex Steel)
Thermal bridge-free panel construction, panels double-sided with steel cover, 100% CFC-free foam
Panel thickness floor: 125 mm
Panel thickness front wall: 50 mm
Panel thickness roof: 85 mm
Panel thickness rear doors: 90 mm
Panel thickness side walls: 45 mm
Internal body length: 13,310 mm
Internal body width: approx. 2,495 mm
Internal body width reduced by base/protection rails
Internal height: 2,650 mm
Front wall
Sandwich panel with reinforcement and cut-out suitable for Carrier or Thermo King refrigeration unit; impact tested per Swedish standards
4 vertical spacer profiles (100 mm) inside on the front wall for optimal air circulation
Roof
Sandwich panel with steel cover, cable routing for temperature sensor and lighting integrated into the roof edge
Internal reinforcement for evaporators, channel in the roof for refrigerant lines
V2A stainless steel protection for additional offset evaporator
Evaporator placed rear left
4 LED ceiling lights, surface mounted, laterally offset
Door contact switch for interior lighting
Side walls
Full sandwich panels with steel cover, painted outside, PVC-coated inside. Floor tray connected laterally and at front with abrasion-resistant aluminium angle base strip approx. 300 mm high
1 pair of aluminium protective rubbing strips on the side, height 285 mm
Height lower edge of first rubbing strip above floor: placed directly above angle base strip
Rear wall
Double-wing rear doors, 3 aluminium hinges per door leaf, external dust seal, V2A portal frame with docking seal top and bottom, external single-lever comfort lock
Rubber buffers as protector strip crosswise at lower rear portal
Additional vertical docking seal at centre of rear portal
Dual single-lever comfort locks at rear
Aluminium rubbing strips inside rear doors, approx. 285 mm high
Door retainers (crutch stick type)
2 red position lights (LED) top rear frame
Accessories
Plastic diesel tank, approx. 240 ltr., biodiesel compatible
Tank opening on both sides, cap with cylinder lock
Tank sensor for diesel tank including LED fill level indicator on front wall
Refrigeration unit
Thermo King Spectrum SLX i for multitemp, diesel/electric, including i-Box, with temperature/data recorder (CargoWatch) including 2 temperature sensors, with additional S-3 evaporator (deep freeze), Two Zone B system, refrigerant R 452 A
Installation and connection of the 2nd supplied temperature sensor for Thermo King reefer unit
Tyres
6 units, 385/65 R 22.5
Tread depth:
Front axle (VA): 4 / 7 mm
Middle axle (MA): 10 / 10 mm
Rear axle (HA): 4 / 3 mm

Customs plates and insurance available for a surcharge upon request! For export transactions, we can handle the export declaration and registration for you against reimbursement. For exports to non-EU countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer upon successful customs clearance or delivery.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.