Brandalı açık yarı römork

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, first axle lift, lifting roof, Vario Loch-Fix chassis frame, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof, toolbox, single owner, like new condition.

Permissible kingpin load: 12,000 kg
Technically possible kingpin load: approx. 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technically possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Unladen weight basic specification: approx. 6,130 kg
Curb weight as configured: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading area length int.: approx. 13,620 mm
(G) Loading area width int.: approx. 2,480 mm
(G2) Rear clear loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen in level driving position: approx. 1,020 mm
(H2) Loading height laden in level driving position: approx. 990 mm
(H3) Achievable ramp height at rear with fifth wheel height of 910 mm, loaded and raised: approx. 1,200 mm
Driving height set to 265 mm.
(K) Side loading height (internal): front approx. 2,735 mm to approx. 2,860 mm (adjustable in 5x25 mm increments), rear approx. 2,810 to 2,860 mm (adjustable in 1x50 mm increment)
(K1) Clear height under roof (internal): front approx. 2,875 mm to 3,000 mm (adjustable in 5x25 mm increments); rear approx. 2,950 to 3,000 mm (adjustable in 1x50 mm increment)
(X1) Overall height unladen in level driving position: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Overall height laden in level driving position: = H2 + K + T +/- body height adjustment
Body settings: The 'Mega' body construction enables height adjustment of 5x25 mm at the front and 1x50 mm at the rear. Relevant heights (overall height, side loading height, internal height) change accordingly based on the selected body setting.

(T) Roof construction height side: approx. 180 mm. Due to the roof beam design, the pallet-width internal height matches the stated internal roof height.
(N) Front overhang (as per ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (as per ISO 1726): approx. 2,040 mm
(O) Rear swing radius (as per ISO 1726): approx. 2,300 mm
(P) Height above fifth wheel: approx. 90 mm
(S) Possible unladen fifth wheel height: approx. 930 to 1,060 mm, level at approx. 930 mm (observe overall height!)
Hsdpfxsy Ifw Ds Actel
Braking system compliant with ECE-R13
Electrical system compliant with ECE-R48
Wabco brakes, air suspension
BPW 3-axle ECO Air assembly with disc brakes Ø 370 mm, ET 120, air suspension 260 mm stroke.
6x 445/45 R 19.5 tires
Steel pallet stop strips with VarioFix hole pattern (bolted), on left and right in direction of travel
Vario Fix steel hole external frame with 3 pairs of stanchion holders
Mechanical/hydraulic lifting device, lifting height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with occupational safety directive BGV D 29. (The lifting roof can only be operated with the doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). For road transport only.
"Daimler Load Securing DL 9.5" certificate.
Frame, chassis, and standard equipment add-on pa

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.