Alçak şasi dorse

FAYMONVILLE 4(2+2)-Achs MULTIMAX Baggermulde TELE 2xNachlauf

WHATSAPP:

FAYMONVILLE 4(2+2)-Axle MULTIMAX Low Loader Semi-Trailer, air suspension, 2 self-tracking steering axles
Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM
German trailer, first owner
4.1m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extendable width, ALUMINUM WHEELS, FULL EQUIPMENT!!!

Gooseneck:
Gooseneck SNT design approx. 3.7m, bevel approx. 1,000 mm x 10°

Loading area:
Telescopic loading platform, length approx. 8.8m, chamfer approx. 500 mm x 10°
Excavator dipper trough approx. 2490x750x210mm

Ramps:
1 pair two-part steel ramps, approx. 4,350 mm x 900 mm
Bsdpfey Iq Arjx Ah Sodb
Hydraulically foldable ramp tips
Ramps can be hydraulically adjusted individually by approx. 235 mm outwards and approx. 215 mm inwards

Axles and Suspension:
4x BPW axles 12t, 2 fixed, 2 self-steering axles
Electromagnetic reverse lock (auto + manual)
Air suspension with raise/lower valve
Tyres: 235/75 R17.5 3PMSF MICHELIN ? PIRELLI Load index: 143/141J (144/144F), new spare tyre
16x POWDER-COATED ALUMINIUM WHEELS
Braking system WABCO, EBS-E EU-compliant
24-Volt lighting system, ASPÖCK-NORDIK
ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin

PAINTWORK:
Standard HRM metallization of outer frame
Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%), hot finished

Steel construction - steel grades:
* S355J2+N/S355MC (Yield strength 355MPa)
* S690QL/S700MC (Yield strength 690MPa)
* Welders certified to DIN-EN 287-1
* Welding process: MAG according to EN ISO 4063
* Shielding gas M21 according to EN ISO 14175

Accessories:
Detachable steel front wall, approx. 400 mm high
* NATO socket + spiral cable
* 3 kW electro-hydraulic unit for hydraulic operations
* Spare wheel holder at front wall
* Mounting holes for bolted lashing rings
* First hole approx. 200 mm from front, then approx. every 400 mm
* 2 pairs of screw-in lashing rings (LC 5,000 daN)
* Mounting hole in rear upper area of outer beams
* 1 pair of screw-in lashing rings (LC 10,000 daN)
* Gooseneck with approx. 40 mm hardwood flooring
* 1 pair of plug-in aluminum side boards, aluminum tailgate approx. 400 mm high, anodized
* 2'' kingpin
* Guide plate on gooseneck for the fifth wheel plate, width approx. 500 mm
* 4 wheel chocks with holders
* Mounts for aluminum loading ramps
* JOST mechanical landing gear with 2-speed gearbox and crank
* Continuous loading platform deck with interrupted hardwood flooring of approx. 50 mm between axles
* Deck locking with conically welded positioning profiles, 250 mm including tensioning plate
* Elongated holes for attachable and movable bridging elements at front of loading area
* 1 inter-table with recessed loading area, approx. 300 mm wide for telescopic tube
* Elongated holes front and rear for attachable/movable bridging elements
* Removable cover, level with loading area
* Extendable loading width approx. 230 mm per side
* 1 pair of fixed wheel recesses open up to extension, approx. 700 x 410 mm, located in loading area in front of 1st axle
* Covers for wheel recesses, split lengthwise, with wooden overlay, external lock pins
* Wheel recesses with steel floor plates and 15 x 15 mm square climbing bars, each approx. 200 mm
* Between 2nd and 3rd axle: 1 pair of fixed wheel recesses in the loading area
* Rubber flooring "Super Grip" 25 mm and steel flooring approx. 5 mm as additional reinforcement on loading slope
* Control valves for hydraulic ramps right a...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.