Değişebilir kasalı yarı römork

KÖGEL 3-Achs-Containerchassis 20'

You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment. Complete specification available on request.

Chassis:
* Chassis frame made from high-quality steel, without external side member
* Coupling plate with a two-kingpin saddle in accordance with DIN 74080 / ISO 337
* With crossmember and container locks for mounting: a) 1 x 20' container, flush with rear, b) C715
* Vehicle equipped with Quick-Lock container locks!

Running Gear:
Guedpjy Rwx Ssfx Acteb
* Axle lift system on axle 1
* Fully automatic, load-dependent axle lift control. Traction assist: activation by pressing the brake pedal 3 times, 30% overload up to speeds of 25 km/h
* SAF three-axle assembly with disc brakes, diameter approx. 430 mm, offset approx. 120 mm. Air suspension with an approx. 180 mm stroke

Vehicle Tires:
* Wheels with internal sensors in accordance with UN ECE R141
* Six 385/65 R 22.5 AUSTONE ATH155 tires
* 6 steel rims, 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
* JOST landing legs, mechanical with compensating feet, approx. 24 t lifting capacity. Single-side operation on the right (in the direction of travel)
* Spray suppression system in accordance with Regulation (EU) No. 109/2011, comprising: 3 pairs of semicircular mudguards with mudflaps
* 2 wheel chocks with holders
* Fixed steel rear underrun protection in accordance with ECE-R58, bolted design

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting cables), parking brake as spring-actuated brake, external pneumatic connections, and external EBS diagnostic connector via ISO 7638 jack
* WABCO EBS system
* Air suspension system including 1 lift and lower valve, installed in the direction of travel between the first and second axle
* 2 mix-up-proof coupling heads at the front ISO 1728
* Steel (EN 286-2) air reservoirs for brake and air supply systems

Bumper:
* Heavy-duty steel rear bumper, mounted on rear cross member

Electrical / Electronics:
* Lamp carrier made of steel, mounted above the underrun protection
* KÖGEL LUXIMA Premium package, includes: - LED license plate lighting, front LED marker lights and reflectors - flashing LED side marker lights - Superseal and bayonet connectors for lighting
* 2 LED multi-chamber tail lights with integrated arm-mounted LED outline marker lights
* Adapter spiral connecting cable (4m) from 15-pin socket to 2x7-pin plugs. Not ADR compliant!
* 15-pin ISO 12098 socket at the front (without connecting cables)
* 2 LED reversing lights (manufacturer of our choice), mounted at rear connection. The operator is responsible for ensuring adequate electrical protection for the tractor unit (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3)
* Complies with vehicle classes EX/II, EX/III, FL, AT

Information Systems:
* Tire pressure monitoring system in accordance with UN ECE R141

Accessories:
* 1 fire extinguisher, 6 kg with manometer (European approval). Mounted with bracket and protective cover on the left side at landing leg foot

Paint Finish:
* Surface coating of mounting components (e.g. front frame extension, folding container locks, centre supports) in Kögel black (KÖGEL KTL system, nano ceramic and KTL coating)
* The frame receives a full-surface coating in deep black RAL 9005 in addition to the KTL coating

Documents:
* EX III version - ADR - certificate

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.