Brandalı açık yarı römork

KÖGEL Kögel Cargo Pritschensattelanhänger

You can find our complete vehicle inventory with vehicles available immediately and at short notice on our website.

Excerpt from the equipment. Complete equipment list on request.

Frame:
* Standard ladder frame in lightweight steel construction with through-bolted cross members
* Coupling plate 8 mm thick, with a double-traction fifth wheel pin according to DIN 74080 / ISO 337

Chassis:
* Axle lift mechanism on axle 1, model 18330.700, manufacturer of your choice (e.g., Kögel)
* Three-axle assembly, with disc brakes Ø approx. 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm travel

Vehicle Tyres:
* 6 x 385/65 R 22.5, 160J (European branded tyres, manufacturer of your choice, e.g., Kögel)

Chassis Attachments:
* Landing legs (manufacturer of your choice, e.g., Kögel), mechanical with compensation foot, approx. 24 t lift capacity. Single-side operation on the right in the direction of travel
* Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011, consisting of 1 pair of quarter-circle mudguards in front of the axles and 1 pair of quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holders
* Pallet box for 24 Euro pallets, fully enclosed, splash-proof, simultaneously serving as a lateral underrun protection device
* Ground clearance (front) 220 mm
* Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm. Installed at the rear left in the direction of travel
* Extendable access ladder at the rear right
* High, rigid rear underrun protection in steel, according to ECE-R58
* Height of underrun protection profile min. 120 mm, designed for increased test forces
* 1 pair each of extendable warning panels for oversize loads, red/white retro-reflective, with LED lighting, spiral cable and plug-in connection. Located at the front and rear of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 plug connection
* EBS system (manufacturer of your choice, e.g., Kögel)
* Air suspension system incl. 1 lift/lower valve, mounted on the left in the direction of travel behind the axle assembly. Driving position is set automatically
* 2 foolproof coupling heads at the front, ISO 1728
* Air tanks for the braking system and air reserve made of steel (EN 286-2)

Floor:
* Panel floor approx. 30 mm thick
* Rear section of the floor caulked

Body:
* WITHOUT quick-release system for side curtain at the front, with tensioning rods
* Quick-release system at the rear for side curtain with tension rods and ratchet
* Complies with body strength according to EN 12642 XL (VDI 2700). Certified for a payload of approx. 27,000 kg

Front Wall:
* Front wall at body height with volume corner posts made of aluminium, riveted with aluminium hollow profiles, bolted/riveted to the frame, 1 pair of lashing rings according to EN 12640
* Inside surface of the front wall reinforced with 12 mm plywood with film-coated finish, approx. 1,250 mm high

Rear Wall:
Gbjdpfx Aaoy Rwyce Nsl
* Double-wing rear portal doors made of aluminium, approx. 2,630 mm internal height
* 4 integrated locking rods (2 on the left, 2 on the right), manufacturer of your choice (e.g., Kögel)
* Bolt-on corner posts at the rear, made of aluminium at portal height
* Corner posts on both sides can be mechanically s

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.