Damperli yarı römork

WIELTON 3-Achskipper/Alu-Kastenmulde /51 cbm/ Kombitür /

Type:

External length: 11,106 mm
Floor length: 9,890 mm
External width: 2,550 mm
Internal height: 2,100 mm
Track width: 2,040 mm
Fifth wheel height: 1,200 mm
Wheelbase: 1,310 mm
Rear overhang: 1,418 mm
Floor height: 1,525 mm
Height at max. tipping angle: 10,064 mm
Max. cylinder tipping angle: 46°
Unladen weight: 6,100 kg
Volume: 50.8 cbm
Sliding tarpaulin 900g/m²
Water tank: 30 L
Toolbox: 165 L
Aluminum ladder: 2,840 mm
Tension chain between sidewalls
Chassis frame Super Light, straight, longitudinal beams with recessed fifth wheel plate section
Welded, weight-optimized construction made of high-strength S700 steel
Air suspension
Side underrun protection made of aluminum profiles according to ECE 73
2 plastic wheel chocks
Distance: kingpin – 2nd axle: 6,810 mm
Wheelbase 1,310 mm
Rear underrun protection made of steel
Folding underrun protection at the rear
1,200 mm fifth wheel height unladen
Number of axles: 3
6x tires 385/65/22.5 standard (Bridgestone/Hankook)
Without spare wheel rim
6x aluminum rims ABERG AluPro BRUSHED 22.5x11.75 ET-120
Rigid axles
No axle lift on 3rd axle
Hjdsy Sklbjpfx Ahzjfg
1st axle lift
SAF disc brake axles 3x9000 kg 22.5 INTRADISC CD
2-speed landing gears, full load (BPW Gen2 FL/SAF Hercules)
No spare wheel carrier and spare wheel winch ( )
Aluminum ladder L=2,840 mm
Toolbox – 165 L (mounted centrally on chassis, left side)
Water tank – 30 L (mounted centrally on chassis, left side)
Shovel and broom mounted to chassis above the mudguard
Extendable ladder at rear
Front wall inclined at 20 degrees
Side walls SL, internal thickness 2.5 mm, fully welded
Internal height 2,100 mm
Double-wing aluminum combination door, aluminum (1/2 + 1/2) vertically with portal beam
2 grain hatches
Tension latches at bottom – 2 pcs.
Pallet-width construction
5 mm floor
Floor crossmember spacing under the floor: 360 mm
Basin damping: Polyp
Tension chain between sidewalls
Operating station fixed to front wall, access on front left
PVC sliding tarpaulin 680 g/m² with quick release and aluminum winding tube
(with vertical rear end, with extension triangle at front and rear,
central tube welded into tarpaulin)
Reinforced tarpaulin 900g/m²
Braking system: Knorr IVL or Wabco, according to manufacturer's choice
Spring pressure gauge
Steel air tanks
Control line for lift axle from driver's cab
Hydraulic connection kit 1"
Hydraulic cylinder, top eye mounting

The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. No tire pressure sensor for spare wheel.
Tipping angle indicator.

The manufacturer grants a 24-month warranty on the vehicle, subject to the statutory provisions of the respective market. The warranty applies according to the terms and conditions of sale and delivery and requires compliance with the maintenance intervals specified in the warranty booklet.
Warranty period for ON-ROAD/OFF-ROAD products:
- 24 months on the complete product from the date of initial registration
- 36 months on the vehicle frame from the date of initial registration (excluding surface rust)
- 10 years warranty against chassis corrosion (understood as rust forming from the inside out)

Export license plates and insurance available on request at extra cost! For export transactions, we can handle the export declaration and registration for you on r

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.