Brandalı açık yarı römork

SCHWARZMÜLLER 3-A Curtainsider SAF Pal-Kiste CodeXL NEUZUSTAND

SCHWARZMÜLLER J-Series 3-Axle Sliding Curtain Platform Semi-Trailer RH125
LIKE NEW CONDITION! FIRST REGISTRATION: 01/11/2017

Weights:
Technical Gross Weight: 39 t
Technical Axle Aggregate Load: 27 t
Technical Fifth-Wheel Load: 12 t

Dimensions:
Internal length: approx. 13,620 mm
Internal width: approx. 2,480 mm
Internal cargo height: approx. 2,730 mm
Loading height: approx. 2,600 mm
Maximum width: 2,550 mm

Welded steel frame construction
Lightweight chassis made from high-strength fine-grained steel
Designed for point load of 20 t over 6 m loading length
Frame height at front: approx. 125 mm
Coupling height unladen: approx. 1,100 mm - 1,170 mm (with air-suspended tractor unit)

Perforated outer frame with approx. 100 mm hole spacing, long holes 40/25 mm as per DIN EN 12640, plus 23 pairs of recessed 2.5 t lashing rings
Steel landing gears, 2 x 12 t, single-sided operation, push balance
3x SAF-Intradisc-B9 axles with 430 mm disc brakes (22.5" disc), load capacity 9 t/axle, on-road version
Axle spacing: 1,310 + 1,310 mm
Wheelbase: 7,620 mm
Lifting axle raises and lowers automatically by load, with forced lowering and speed-limited starting aid; operation via dashboard button and/or '3 x braking'
# Vehicle does not comply with legal turning circle regulation when driving with lifted 1st axle; axle lift to be used as starting aid only
6 tyres 385/65 R 22.5, 160K FULDA ORIGINAL TYRES
6 steel rims 11.75 x 22.5, offset 120 mm, silver
6 stainless steel wheel trims, polished

Braking system according to EC Directive 71/320 or ECE R13
Two-line compressed air brake system
EBS 2S2M, one axle sensed
Iodpsy Swruofx Ab Tetg
RSS/RSP—stability program
Spring-loaded parking brake on 2 axles
Aluminium air reservoir
air suspension with lifting/lowering function, total stroke approx. 200 mm
Automatic adjustment to programmed ride height from 15 km/h upwards
Axle load display via EBS CAN-BUS signal for in-cab display

27 mm phenolic plywood floor with aluminium top-hat profile rails over longitudinal beams, forklift axle load capacity: 7,200 kg
Front wall of aluminium hollow section, approx. 2,400 mm tall, internal, with 2 lashing rings for load securing
Internal front wall protection made of 9 mm phenolic plywood, approx. 650 mm high
Top of front wall covered with curtain matching side curtain colour
Front curtain rail with tension lever
Rear wall: aluminium double doors in profiled design, each with 2 internal locking rods, aluminium corner posts bolted to the side
Curtain rail at rear corner posts with ratchet tensioner; curtain opens from the rear
Door retainers
3 pairs of centre posts, sliding along the entire length, locked into pockets
4 rows of slat pockets
32 aluminium slats, 100 mm
Versus sliding roof system with plastic folding panels, moves rear to front; rear cross bar with pop-up function, also partially rearward tiltable (can be opened from above)
Aluminium running rail profile, height 140 mm
Black side plastic sealing lip
Sliding curtain, approx. 880 g/m², CodeXL, with welded horizontal and vertical belt reinforcements, seal to the perforated outer frame
Curtain secured by 24 anti-lift fasteners with brakes, flat hooks/belts per EN 12641-2, compliant with Daimler Guideline 9.5
Curtain rope all around with holder
Curtain colour similar to RAL 9005 jet black
Translucent plastic roof curtain
24-volt lighting system compliant with EC Directive 76/756/EEC
Partial LED rear five-chamber lights “Europoint III”
LED marker lights

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.