Diğer

SENNEBOGEN 630 Seilbagger 2007 30m. + Ausleger 7,5m

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection Bedpfx Ajk Af Svonfodg - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Bedpjrgzv Nofx Anfodg * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durum: ikinci el, güç: 74,5 kW (101,29 bg), yakıt türü: dizel, renk: kırmızı, kaldırma gücü: 4 kg/m, kaldırma yüksekliği: 14.000 mm, lastik boyutu: 15.5 / 80 - 24, lastik durumu: 98 yüzde, direk tipi: teleskopik, Üretim yılı: 2007, çalışma saatleri: 1.048 h, Donanım: her tahrikli, kabin, palet çatalları, Rough terrain telescopic forklift MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 – 4x4x4, first operation: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, ADDITIONAL HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 HP / 74.50 kW at 2,200 rpm), REMOTE CONTROL, FOUR-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic stabilizers (2x / WIDE VERSION), SIDE SHIFT – REGULATION, CPB, OVERLOAD WARNING DEVICE, spacious cab (tinted glass), comfort seat (KAB), ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, external mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport eyes. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all around. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), Width: approx. 2,440 mm, Height: approx. 2,560 mm. Price is net export price; domestic sales plus statutory VAT. FINANCING AVAILABLE / LOW-COST TRANSPORT (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE IS PAYABLE (!) © pb Bdodpfsuiyqdjx Anfog

Durum: yeni, azami yük ağırlığı: 65.400 kg, toplam ağırlık: 93.400 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Pos. 1. Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data are only valid when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights - Speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Bdjdpjwg N N Iefx Anfog Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Total combination length: 24,165 mm Vehicle width: Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Steering radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front running gear Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered 14,400 mm flatbed (external beams), single telescoping with disconnect point Length x width: 7,000 mm x 2,750 mm Telescopic extension by/max.: 3,400 mm / 10,400 mm Build height: 300 mm Plus 4,000 mm extension beam incl. Loading height loaded: approx. 450 mm 4-axle rear running gear Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 16.300 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2018, süspansiyon: diğer, lastik boyutu: 205/65 R 17,5, renk: yeşil, Donanım: ABS, EBS (Elektronik Fren Sistemi), - 5 dingil: 1. dingil sürtünme ile yönlendirilir ve kaldırılabilir; 2.-5. dingil hidrolik yönlendirmeli - Uzatılabilir: 6.200 mm (Toplam uzunluk: 12.800 mm - 19.000 mm) - SAF dingiller Bedeymnmwjpfx Anfodg - Ayaklı kayar hidrolik çift rampalar - Kaldırma ve indirme sistemi - Kampanalı frenler - Süspansiyon: Havalı-kaldırmalı Hatalar olabilir, değişiklik hakkı saklıdır.

Durum: mükemmel (kullanılmış), ilk tescil: 08/2008, renk: yeşil, Üretim yılı: 2008, Çekilebilir üst yapı: Evet Teknik durumu: çok iyi Bsdpfxjykz Uio Anfodg Optik durumu: çok iyi

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 11.200 kg, izin verilen dingil yükü (dingil 2): 11.200 kg, izin verilen aks yükü (aks 3): 11.200 kg, yükleme alanı uzunluğu: 14.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, toplam uzunluk: 14.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 245 / 70 R17.5, renk: mavi, Üretim yılı: 2008, Donanım: hidrolik arka platform, Color: Blue Payload capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights / Payload King-pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload capacity: 72,600 kg Axles Axle manufacturer: BPW Air suspension 1st axle fixed Axles 2–6 with hydraulic steering Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Max. extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm – 925 mm King-pin height: approx. 1,350 mm Additional equipment • PTO operated by truck Bdodpox R Undofx Anfsg • Lashing rings • Stake pockets • Partial wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king-pin • Central greasing system • Oversized load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; Max. axle load: 11,200 kg; Steering Rear axle 3: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 4: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 5: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 6: Twin tyres; Max. axle load: 11,200 kg; Steering Weights Unladen weight: 20,600 kg Payload: 72,600 kg Total weight: 93,200 kg Functional Body manufacturer: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request

Durum: ikinci el, güç: 74,5 kW (101,29 bg), yakıt türü: dizel, renk: kırmızı, kaldırma yüksekliği: 18.000 mm, lastik boyutu: 15.5 - 25, lastik durumu: 98 yüzde, direk tipi: teleskopik, Üretim yılı: 2011, çalışma saatleri: 2.847 h, inşaat yüksekliği: 2.540 mm, çatalların uzunluğu: 1.200 mm, fork taşıyıcı genişliği: 1.200 mm, yük kapasitesi: 4.000 kg, Donanım: her tahrikli, kabin, palet çatalları, Rough-terrain telescopic handler MANITOU, model: MT 1840 EP PRIVILEGE TURBO – 4x4x4, first use: 2012, LIFTING CAPACITY: 4,000 kg, LIFT HEIGHT: 18.00 m, RADIO REMOTE CONTROL, EMERGENCY LOWERING SYSTEM, LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,200 mm), AUXILIARY HYDRAULICS, LOAD PROTECTION GRILLE, 4-cylinder PERKINS diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), CPB, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x), SIDE SHIFT SYSTEM, OVERLOAD WARNING SYSTEM, PANORAMIC CAB (large cab) – tinted safety glass, ROPS / FOPS certified, GRAMMER comfort seat, trailer coupling, WORK LIGHTS (front & rear), road lighting, BEACON / REVERSING ALARM, windscreen wipers (3x), exterior mirrors (2x), heating / ventilation, OPERATING MANUAL (in German). Tires: BKT OFF-ROAD TIRES (15.5 – 25) – all approx. 98% tread remaining. Transport dimensions: Length: approx. 7,420 mm (approx. 6,100 mm without forks), width: approx. 2,400 mm, height: approx. 2,540 mm. FINANCING AVAILABLE / COST-EFFICIENT WORLDWIDE TRANSPORT / FOR EXPORTS, ONLY NET PRICE TO BE PAID (!). Bdsdpfx Anouiwv Refjg

Durum: iyi (kullanılmış), kilometre: 83.664 km, renk: mavi, Üretim yılı: 2017, çalışma saatleri: 11.908 h, Üretici: Liebherr Model: LTM 1040-2.1 Yıl: 2017 Kapasite (ton): 40 Ana bom: 35 m Jib: 9,5 m Kilometre: 83.664 km Bodey E Ig Aopfx Anfsdg Vinç saatleri: 11.908 saat Alt şasi saatleri: 4.883 saat

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 14 kg, izin verilen dingil yükü (dingil 2): 14 kg, izin verilen aks yükü (aks 3): 14 kg, yükleme alanı uzunluğu: 21.200 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 1.240 mm, toplam uzunluk: 21.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 1.240 mm, süspansiyon: hidrolik, lastik boyutu: 285 / 70 R19.5 (150/148J), renk: mavi, Üretim yılı: 2012, Color: Blue Payload capacity: 110,550 kg Extendable Main Features Manufacturer: Goldhofer Model: THP / XLE 8 (3+5) Low Loader Chassis Number: WG0THPX57B0030736 Gooseneck VIN: WG0SH0005B3030736 XLE 3 VIN: WG0XLE034B0035242 XLE 5 VIN: WG0THPX57B0030736 Year of Manufacture: 2012 Weights/Load Capacities Fifth Wheel Load: 27,000 kg Axle Load: 14,000 kg Total Axle Load: 8 x 14,000 kg = 112,000 kg Gross Vehicle Weight (GVW): 139,000 kg Unladen Weight: 28,450 kg Payload: 110,550 kg Axles BPW Pendle Axles Axle Spacing: 1,360 mm / 1,400 mm EBS/ABS Tyres: 285 / 70 R19.5 (150/148J) Hydraulic Steering and Suspension Radio Remote Control Dimensions Overall Length: 21,200 mm Loading Bed Length: 6,000 mm Loading Bed Extension: 8,500 mm Max. Loading Bed Length: 14,500 mm Loading Bed Thickness: 450 mm Loading Height: 200 mm Loading Width: 2,750 mm / 3,250 mm Bogie Width: 2,750 mm Bogie Height: 1,240 mm (+/- 300) Excavator Boom Recess: 700 mm Additional Information Hydraulically operated via truck PTO 3.5” King Pin Central Lubrication System Remote Control Operation Detachable Gooseneck Hydraulic Quick Couplers Oversize Load Marker Boards Work Lamps Amber Warning Light Ramps for Ground-Level Loading Additional Tables for Loading Bed Extension = Further Information = General Information Year of Manufacture: 2012 Axle Configuration Tyre Size: 285 / 70 R19.5 (150/148J) Axle Brand: BPW Suspension: Hydraulic Suspension Centre Axle 1: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Centre Axle 2: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Centre Axle 3: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Rear Axle 1: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Bodsxx Sv Ejpfx Anfjdg Rear Axle 2: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Rear Axle 3: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Rear Axle 4: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Rear Axle 5: Twin Tyres; Lift Axle; Max Axle Load: 14 t; Steered Weights Unladen Weight: 28,450 kg Payload: 110,550 kg Gross Vehicle Weight: 139,000 kg Condition Technical Condition: Good Visual Condition: Good Financial Information Price: On request