Açık yarı römork

Fliegl 3-Achs Plateau SDS 420 Scandic Spezial

Chassis Semi-Trailer Forwarding
Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with
replaceable 2" kingpin
Outer frame in low loader design:
7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t
10 pairs of combination stake pockets with ring lashing eyes (bolted), each rated for 5 t, embedded in the outer frame, approx. 72 x 42 mm internal dimensions
Outer frame with 'Load-Lock Profile' for lashing strap hooks, with holes approx. every 400 mm
24 t, two-speed landing gear, single-side operation
Free swing radius to landing leg approx. 2500 mm, landing leg spacing approx. 2600 mm
Telescopic ladder at the rear
2 wheel chocks with holder
Side impact protection, aluminium
Underrun protection, galvanized steel
Rear mud flaps across full width
Quarter shell fenders before and after axle assembly
with anti-spray mud flaps only on last axle
2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable
in front of axles 1x on driver's side and 1x on passenger side
1 storage box, full width, closed, underneath the loading deck, approx. w=450 mm / h=400 mm / d=2460 mm
mounted directly in front of axles
3 lashing/stake rails with 4 pairs of locking slots, installed crosswise in the floor over the full width up to the outer frame (max. usable internal width between the outer removable stakes approx. 1782 mm), approx. 80 mm high. With cut-outs on top and bottom for lashing and inserting stakes 80 x 80 mm. Bottom partially open downwards with angle bracket as stop. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container locking adapters
10 combination removable stakes with cut-out at the bottom W=80/D=50/L=1200 mm
6 removable stakes W=80/D=80/L=1200 mm, hot-dip galvanized
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter
Air suspension
1st axle automatic lift axle, additionally electric control from the truck, including forced lowering and start-up aid
Brake system
2-line compressed air braking system
Spring-loaded parking brake
2 foolproof coupling heads at the front
24 Volt EBS, electronic braking system with EBS socket at the front
Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
with Raise & Lower valve + auto-reset function
Vehicle stability control system
Blsdpszbbpujfx Ah Nsh
Axle load detection via EBS CAN-bus signal, display in driver’s cab
Wheels and Tyres
385/65 R22.5"
Steel rims
'RDKS' Tyre Pressure Monitoring System in accordance with ECE R 141, display in towing vehicle, via EBS
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
side yellow LED lighting linked to indicator "Flashing side marker lights"
2 white LED position lights at the front
2 white/red lane control lights at the rear
2 x 7-pin and 1 x 15-pin foolproof sockets at the front
2 additional LED work lights at the rear
1 LED beacon with bracket
2 pairs of LED warning signs illuminated and extendable up to 3,000mm
2 additional LED work lights on top of the front bulkhead
additional 7-pin socket in the rear underrun protection
Floor
Anti-slip phenolic plywood panels approx. 30 mm thick, high point-load capacity for forklift axle loads up to max. 7,900 kg
'Premium floor sealing' throughout, floor all-round jointed
Front Bulkhead / Corner Posts
25 mm aluminium hollow section, 1,350 mm high, steel corner posts in volume version
Front bulkhead additionally lined inside with 1,250 mm high phenolic plywood panel
'Crash-blocker', steel i

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.