Kullanılmış Faymonville Extendable / Ausziehbarer Auflieger satın al (4.084)

Koşul: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Nsdpfx Asy Uwu Islaswg Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side Nwsdpov Etx Eofx Alaog * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Koşul: ikinci el, boş ağırlık: 11.900 kg, azami yük ağırlığı: 39.060 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear gooseneck in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable Load Floor: - Extendable load floor - 5 pairs of swivel-out lashing rings (LC 5,000 daN) - 3 pairs of swivel-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the load floor (LC 10,000 daN) - Cutouts in the external frame of the load floor for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate over the axle area Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment - Maximum load per pair: 40,000 kg Axles and Tyres: - BPW axles, two rigid axles, two steering axles - Air suspension, drum brakes, with lift/lower function - The self-steering axles feature an electro-magnetic reverse lock, activated automatically when reversing or manually - Axle tools - Tyres: 205/65 R17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with mount in front of front wall - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the inclined section of the loading area - A mounting bracket for beacon at the rear of the semi-trailer - Galvanized extendable extensions, approx. 230 mm per side - White reflective tape on side in compliance with EU regulations, extension and rear red - One bracket per side at gooseneck and rear panel for warning boards, including socket Nedpjxwnfmefx Alajwg - One mudguard at the rear of the semi-trailer - European reflector plates (red-yellow) at rear - ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm, plug-in design - The rear galvanized insert stakes are removable. Total body length approx. 2,560 mm - 7 pairs WADER container pockets: - 1x 20ft container on the load floor - 1x 40ft container on the load floor - 1x 40ft container above the gooseneck - 2x 20ft containers - Support stand with 1 pair WADER container pockets (king pin load approx. 20,000 kg) - 7 pairs of stake pockets for insert stakes 100 x 50 mm in outer frame of load area - Lift axle on front axle with control via TEBS E depending on current axle load and loading condition - Sliding mounting rail for ALU approach ramps at the rear of the vehicle - Sanded, painted non-slip coating applied to checker plates on the gooseneck and load floor - Four extendable warning boards (approx. 400 mm extension) approx. 423 x 423 mm with position lamp - Bracket for beacon on the warning boards - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load chart

Koşul: iyi (kullanılmış), renk: sarı, Üretim yılı: 2013, = Further Options and Equipment = - Centralized lubrication system = Remarks = Faymonville STBZ-7WA. Year: 2013. 12 ton BPW axles. (Dolly with 12 ton SAF axle). Unladen weight: 29,000 kg. Payload: 78,000 kg. Gross vehicle weight: 107,000 kg. Kingpin load: 23,000 kg. EBS, ABS, ALB. Hydraulics powered by the truck's hydraulic system! Aluminium sideboards + toolbox on gooseneck. Radio remote control. Hydraulic gooseneck. Dolly attached to gooseneck. Dolly detachable from the load floor. 3 detachable floor sections. Hydraulic suspension. Axle mileage: 120,658 km. Nwedpfjy Txffsx Alasg Extendable by 4.5 meters + 5 meter extensions. Tyres: 245/70R17.5, 80% tread remaining. Tyres on dolly: 285/70R19.5, 80% tread remaining. Dimensions: Neck: L: 3,860 mm W: 2,550 mm H: 1,750 mm Kingpin height: 1,200 mm Dolly: L: 1,000 mm W: 2,550 mm H: 1,100 mm Floor: L: 8,000 mm W: 3,000 mm H: 600 mm Floor thickness: 400 mm Trailer rear section: L: 8,400 mm W: 3,000 mm H: 950 mm ID No: 276. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations of Heinhuis, as well as to all agreements entered into by Heinhuis and to the negotiations leading up thereto. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have taken note of them. Our prices are net export prices. = Further Information = Year of manufacture: 2013 Unladen weight: 29,000 kg Payload: 78,000 kg Gross weight: 107,000 kg Technical condition: Good Visual condition: Good Price: On request = Company Information = For more information: WhatsApp:

Koşul: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,

Koşul: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of vehicles, available immediately and at short notice, on our website. Partial list of features. Full equipment details upon request. Gooseneck: * Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical kingpin load: 25,000 kg * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction, extendable at the front with mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines run protected in the extendable beams and automatically adjust to the current lowbed length Axles and Suspension: * PENDLE-AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and preload pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed external frame, checker plate cover, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Brake System: * Brake system: WABCO EBS-E in accordance with EU regulations, without connecting cables to the tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Removable steel front wall, approx. 400 mm high * 3 kW electric-hydraulic power pack for hydraulic operations (except hydraulic winches), supply line installation on the tractor unit not included * Outer beams on the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN) * 2" king pin * Locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing slats and locking pins for bridging the lowbed receiving hooks * 1 lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading deck * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams * Cutouts above the lashing rings * 1 hanging lashing ring each left and right outside on the rear crossmember (LC 10,000 daN) on the outer beams of the loading deck * Preparation for removable loading floor * Hanging bar at the front of the rear chassis for loose access ramps to the lowbed * Chassis with beveled rear corners * Hanging bar for loose aluminium ramps on the rear end traverse of the vehicle Nwedjx Uvllopfx Alasg * Remote steering from front and rear via cable remote control with push-buttons, with axle tracking control, without installation in the tractor unit * Mechanical pin-latch coupling from lowbed to chassis for swapping loading platforms or installing extension beams, with electrical, pneumatic, and hydraulic couplings * Round NATO socket at the front connector bar (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories: * 1 pair of removable aluminium side walls on the gooseneck, approx. 400 mm high, anodized finish * A

Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA. Baujahr: 2015. 10-Tonnen SAF-Achsen. Eigengewicht: 22.250 kg. Nutzlast: 57.750 kg. Zulässiges Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulik wird über NATO-Anschluss vom Lkw betrieben. Alu-Bordwände am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. Luftfederung. 5 Meter ausziehbar. Funkfernbedienung. Baggerbrücke: 5.600 mm x 950 mm. Nwodpfx Asy S Sk Sslaog Bereifung: 235/75R17,5, Profil 80%. Abmessungen: Schwanenhals: L: 4.900 mm. B: 2.500 mm. H: 1.800 mm. Königszapfenhöhe: 1.300 mm. Ladeboden: L: 8.000 mm. B: 2.750 mm. H: 500 mm. Bodendicke: 300 mm. Heckauflieger: L: 5.600 mm. B: 2.750 mm. H: 1.050 mm. Dolly D-2. Baujahr: 2015. 10-Tonnen SAF-Achsen. Eigengewicht: 3.650 kg. Zulässiges Gesamtgewicht: 36.100 kg. Sattellast: 16.100 kg. Luftfederung. Bereifung: 235/75R17,5, Profil 70%. Deutscher Auflieger! 4 Stück verfügbar! ID-Nr.: 552. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, sämtliche mit Heinhuis geschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA Baujahr: 2015 10 Tonnen SAF-Achsen Eigengewicht: 22.250 kg Zuladung: 57.750 kg Max. Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug Aluminium-Bordwände am Schwanenhals Hydraulisch abnehmbarer Schwanenhals Luftfederung 5 Meter ausziehbar Funkfernsteuerung Baggerbrücke: 5.600 mm x 950 mm Bereifung: 235/75R17,5; 80 % Profil Abmessungen: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck Anhänger: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2 Baujahr: 2015 10 Tonnen SAF-Achsen Eigengewicht: 3.650 kg Max. Gesamtgewicht: 36.100 kg Sattellast: 16.100 kg Luftfederung Bereifung: 235/75R17,5; 70 % Profil Deutscher Auflieger! 4 Stück verfügbar! ID-Nr.: 427 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge sowie für alle mit Heinhuis geschlossenen Verträge und den vorangegangenen Verhandlungen. Mit jeder Kontaktaufnahme erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zul. Gesamtgewicht: 80.000 kg Ausziehbare Ausführung: Ja Preis: Auf Anfrage = Firmeninformationen = Nwedpfx Aley S Si Ioajg Für weitere Informationen: WhatsApp:

Koşul: ikinci el, azami yük ağırlığı: 49.900 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, bir sonraki muayene (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single telescopic loading platform, wheel recess, with rear bevel and drive-on ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - Robust all-steel welded construction - Designated loading platform 3,900 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) - Ball-race turntable-mounted fifth-wheel plate with replaceable 2" kingpin and adjustable steering wedge - Mechanical landing gear at the front Loading Platform - Single telescopic, constructed as external/internal tube design with fixed 300 mm front platform section - 300 mm sliding table, adjustable and lockable on the inner tube - Extension stage locking with spring-loaded cylinders and conical bolts - 1 pair of wheel recesses after the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis - 1st axle liftable, steerable ahead - SAF axle assembly, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift/lower valve for lowering to min. 805 mm or raising to max. 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess after gooseneck 410 mm deep - Wheel recess after the 1st axle 410 mm deep Rear of Vehicle - Design "Bevelled 500 mm" - Short overhang 1,240 mm from center of the last axle - Hydraulic rear support Drive-on Ramps - 2-piece ramps with lengths 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - Dual-line full air braking system for all axles, with diaphragm brake chambers - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Park brake via spring-loaded cylinders Nodpfx Aoy Iq Tdolaswg - Anti-lock braking system (ABV brake) Special Equipment - Wheel recess - Excavator boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electro-hydraulic unit with radio remote control Technical data Gooseneck Platform (LxW): 3,900 x 2,480 mm 1,000 mm slope for milling machine Fifth wheel height laden: 1,250 mm Loading Platform Platform (LxW): 8,800 x 2,550 mm Telescopic extension up to 2,800 mm Stepwise extendable to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable, steered ahead 2nd-4th axles hydromechanically forced-steered (dual-circuit steering) Radio remote control Electro-hydraulic unit

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgi: Marka: FAYMONVILLE Model: STBZ-4VA + dolly D-2 Yapı: alçak şasi (düşük platform L=8143-13173 mm / G=2750 mm / Y=510 mm) Yıl: 07.2012 Süspansiyon: hava süspansiyonu Nsdpfx Alsy Nlc Asaowg Frenler: kampana Boyutlar: U/G: 17800 mm / 2750 mm Ağırlıklar: tam/boş: 80000 kg / 22250 kg (dolly hariç) UZATILABİLİR / TÜM AKSLAR DİREKSİYONLU Model yılı: 2012 Süspansiyon tipi: hava süspansiyonu Frenler: kampana Direksiyon: yönlendirilebilir = Daha fazla bilgi = Süspansiyon: hava süspansiyonu Orta aks 1: yönlendirilebilir Orta aks 2: yönlendirilebilir Arka aks: yönlendirilebilir Boş ağırlık: 22.250 kg Taşıma kapasitesi: 57.750 kg Azami yüklü ağırlık (GVW): 80.000 kg

Koşul: ikinci el, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2000, B= 12.000 mm Boş ağırlık 11.300 kg STZ-V kuğu boynu oùa öne doğru uzatılabilir ön yükleme için Değiştirilebilir 2" king pin Dahili hidromekanik direksiyon Nwsdpfey Hgh Uox Alasg Hidrolik kaldırma ve indirme fonksiyonu, destek silindiri dahil 18 ton'a kadar teknik king pin yüküne uygun dört taraflı alüminyum yan kapaklar Dönüş yarıçapı 2.400 mm Alçak yataklı taşıyıcı köprü Düz yatak uzunluğu 5.000 mm, 2.300 mm teleskopik uzatılabilir düz yatak genişliği 2.550 mm Yapı yüksekliği 280 mm Önde STZ-V kuğu boynuna bağlantı için bağlantı pençeleri Alçak yataklı köprünün önünde 2 adet yükleme rampası takozu Yükleme yüksekliği yaklaşık 450 mm 3 akslı şasi havadan süspansiyonlu şasi (UxG) yaklaşık 4.500 x 2.550 mm, kaldırma ve indirme valfi dahil, 3 adet zorunlu yönlendirmeli aks, Marka SAF, dingil mesafesi 2x 1.310 mm Sürüş yüksekliği 970 mm Fren sistemi: iki devreli tam tekerlekli basınçlı hava freni Alçak yatakta katlanabilir genişletme Yüklü durumda king pin yüksekliği: 1.250 mm Tüm 3 aks hidrolik olarak zorunlu yönlendirmeli ve takipli

Koşul: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Length: 1325 cm Net weight: 12,178 kg Gross vehicle weight: 59,000 kg 12-ton axles Nwjdpfjy T D Sqjx Alaeg Steerable on all axles Ready for delivery Description: 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: Njdpfx Aljy Nu Hkoaswg * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) * Grating cover in the loading platform's sloped section...

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.500 kg, izin verilen dingil yükü (dingil 2): 12.500 kg, izin verilen aks yükü (aks 3): 12.500 kg, ilk tescil: 07/2000, toplam uzunluk: 15.410 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 890 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, lastik durumu: 50 yüzde, dingil mesafesi: 12.460 mm, renk: diğer, Üretim yılı: 2000, Donanım: ABS, hidrolik arka platform, = Diğer Seçenekler ve Donanımlar = - 4 aks - Arka kapak - Hidrolik - Havalı süspansiyon - Yönlendirilebilir aks Nwjdpfey Rax Uox Alajg = Ek Bilgiler = Aks konfigürasyonu Lastik ebadı: 245/70 R17.5 Aks markası: SAF Frenler: kampana fren Arka aks 1: Çift lastikli; Maks. aks yükü: 12.500 kg; Lastik diş derinliği: %50 Arka aks 2: Çift lastikli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik diş derinliği: %60 Arka aks 3: Çift lastikli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik diş derinliği: %70 Arka aks 4: Çift lastikli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik diş derinliği: %30 Ağırlıklar Boş ağırlık: 12.800 kg Yük kapasitesi: 68.450 kg Azami toplam ağırlık: 81.250 kg Durum Genel durum: ortalama Teknik durum: ortalama Görsel durum: iyi Kimlik Plaka: ZZ-98-52

Koşul: ikinci el, renk: sarı, Üretim yılı: 2013, Faymonville STZ-3UB. Baujahr: 2013. 10 Tonnen SAF-Achsen. Njdpfxoy I Twxo Alaowg Leergewicht: 12.300 kg. Zuladung: 29.700 kg. Maximalgewicht: 42.000 kg. Sattellast: 18.000 kg. Servolenkung mit 3 gelenkten Achsen. Geschlitzter Boden. Seilwinde. Alu-Bordwände am Schwanenhals. Hydraulik des Aufliegers funktioniert über NATO-Anschluss. Funkfernbedienung. Luftfederung. Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3.000 mm. Hydraulische 2-Punkt-Stützen am Heck. Zweifach hydraulische Rampen: Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: Länge: 3.750 mm. Breite: 2.500 mm. Höhe: 1.380 mm. Sattelhöhe: 1.150 mm. Boden: Länge: 9.600 mm. Breite: 2.550 mm. Höhe: 900 mm. Bereifung: 245/70R17,5 80% Profiltiefe. ID-Nr.: 676. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis sowie für alle mit Heinhuis geschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Form der Rückmeldung akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 12.300 kg Zuladung: 29.700 kg zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 10.500 kg, lastik boyutu: 235/75R17,5, renk: mavi, Üretim yılı: 2005, = Further Options and Accessories = - Air suspension - Central lubrication Nwsdpfjy I Tu Dsx Alasg = Notes = The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations issued by Heinhuis, as well as to all agreements concluded by Heinhuis and the negotiations leading up to them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2005 Axle Configuration Tyre size: 235/75R17.5 Axle make: BPW Rear axle 1: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 2: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 3: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 4: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Weights Unladen weight: 15,000 kg Payload: 45,000 kg Gross vehicle weight: 60,000 kg Condition Technical condition: good Visual condition: good = Company Information = For more information: WhatsApp:

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, lastik boyutu: 245/70R17,5, renk: mavi, Üretim yılı: 2020, Faymonville F-S44-1BBY Year of manufacture: 2020. 12 t SAF axles. Unladen weight: 15,900 kg. Payload capacity: 62,100 kg. Gross vehicle weight: 78,000 kg. Kingpin load: 30,000 kg. Four-axle power steering. Extendable by 6.9 meters. Aluminum side boards on gooseneck. Hydraulic system operates via truck hydraulics. Equipped with EBS, ABS, ALB. Spare wheel included. Central lubrication system. Hydraulic suspension. Widened by 2 x 25 cm. Galvanized finish. Nodpfx Asy I Sw Relaowg Tyre well height: 50 cm. Dimensions: Gooseneck: Length: 3,250 mm. Width: 2,480 mm. Height: 1,550 mm. Kingpin height: 1,300 mm. Deck: Length: 9,050 mm. Width: 2,550 mm. Height: 900 mm. Tyres: 245/70R17.5 (70% tread remaining). ID No.: 114. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations from Heinhuis, to all contracts entered into by Heinhuis, and to any preceding negotiations. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have read them. Our prices are net export prices. = Further information = General information Year of construction: 2020 Axle configuration Tyre size: 245/70R17.5 Axle brand: SAF Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steerable; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steerable; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steerable; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 4: Twin tires; Max. axle load: 12,000 kg; Steerable Weights Unladen weight: 15,900 kg Payload: 62,100 kg Gross vehicle weight: 78,000 kg Functional Loading platform height: 90 cm Condition Technical condition: good Visual condition: good = Company information = For further information: WhatsApp:

Koşul: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 9.300 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2023, Donanım: hidrolik arka platform, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und ungebraucht Gewichte / Zuladung: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg zul. Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Nutzlast: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F) 1. Achse als Liftachse Abmessungen: Ladeflächenlänge: 9.300 mm Ausziehbar um: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladeflächenhöhe: 900 mm Zusätzliche Informationen: Doppelt ausziehbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holz-Ausbauten für Breitenverbreiterung Zurringe Satz doppelt faltbarer Auffahrrampen Zentralschmierung 1x Reserverad + Halter JOST-Stützwinde 24-Volt-Elektrosystem Sattelkupplung 2.0” Eine verzinkte Stahl-Bordwand Elektrisch betriebene Hydraulikpumpe Handlenkung Nwedpfx Aouu Hcfolasg Twistlocks = Additional Information = General Information Year of manufacture: 2023 Axle Configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg gross vehicle weight: 71,000 kg Functional Loading floor height: 900 mm (Note: original value '65535 cm' likely an error, adapted here to correct spec) Extendable chassis: Yes Condition General condition: Excellent Technical condition: Excellent Visual condition: Excellent Financial Information Price: On request Additional Information For further information, please contact Stefan Schaapveld.

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2009, Faymonville STBZ-3VA. Njdpfoy I Av Dox Alaowg Baujahr: 2009. 10 t SAF-Achsen. Eigengewicht: 16.000 - 16.500 kg. Zulässiges Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydrauliksystem kompatibel mit NATO. Aluminium-Bordwände + Werkzeugkasten am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 m ausziehbar. Beidseitig 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4.300 x 950 mm. Feuerverzinkt. Abmessungen: Schwanenhals: Länge: 4.500 mm Breite: 2.500 mm Höhe: 1.850 mm Sattelhöhe: 1.300 mm Ladefläche: Länge: 8.000 mm Breite: 2.750 mm Höhe: 500 mm Bodenstärke: 300 mm Heck des Aufliegers: Länge: 4.300 mm Breite: 2.750 mm Höhe: 950 mm Bereifung: 235/75R17,5, Profil 80 % Dolly D-1. Baujahr: 2008. Erstzulassung: 2009. 10 t BPW-Achse. Eigengewicht: 2.400–2.600 kg. Zulässiges Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75R17,5, Profil 80 % Deutscher Auflieger! 2 Stück verfügbar! ID-Nr.: 632 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Preisabgaben sowie für sämtliche von Heinhuis abgeschlossenen Verträge und die ihnen vorangehenden Verhandlungen. Durch jegliche Art der Kontaktaufnahme akzeptieren Sie die Geltung dieser Allgemeinen Geschäftsbedingungen und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zGG: 60.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2009, Faymonville STBZ-3VA. Baujahr: 2009. 10-Tonnen SAF-Achsen. Leergewicht: 16.000 – 16.500 kg. Zulässiges Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydraulikanlage kompatibel mit NATO. Aluminium-Bordwände und Werkzeugkasten am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 Meter ausziehbar. Beidseitig 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4.300 x 950 mm. Feuerverzinkt. Abmessungen: Schwanenhals: L: 4.500 mm B: 2.500 mm H: 1.850 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck des Aufliegers: L: 4.300 mm B: 2.750 mm H: 950 mm Bereifung: 235/75 R17,5, 80 % Profil. Dolly D-1. Baujahr: 2008. Erstzulassung: 2009. 10-Tonnen BPW-Achse. Nodpfxoy I Avqo Alaswg Leergewicht: 2.400–2.600 kg. Zulässiges Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75 R17,5, 80 % Profil. Deutscher Auflieger! 2 Stück verfügbar! ID-Nr.: 631. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für sämtliche Angebote, Offerten und Anfragen der Firma Heinhuis, für sämtliche von der Firma Heinhuis abgeschlossene Verträge sowie für die diesen Verträgen vorausgehenden Verhandlungen. Mit jeder Form der Kontaktaufnahme erkennen Sie die Geltung dieser Allgemeinen Geschäftsbedingungen an und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zGG: 60.000 kg Ausziehbare Ausführung: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville STBZ-4VA Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik des Aufliegers funktioniert mit NATO-Elektrik Nwjdpjy I Auyjfx Alaeg Hydraulisch abnehmbarer Schwanenhals 5 Meter ausziehbar 2 x Reserverad Verzinkt! Luftfederung Baggerbrücke: 5600 x 950 mm Kabelfernbedienung Abmessungen: Schwanenhals: Länge: 4.500 mm Breite: 2.550 mm Höhe: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: Länge: 7.550 mm Breite: 2.750 mm Höhe: 530 mm Bodenstärke: 350 mm Heck des Aufliegers: Länge: 5.600 mm Breite: 2.750 mm Höhe: 1.000 mm Reifen: 235/75R17,5 80% Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 4.300 kg zGG: 38.000 kg Sattellast: 18.000 kg Luftfederung Reifen: 235/75R17,5 70% Deutscher Auflieger! ID NR: 629 Für alle Inserate, Angebote und Offerten von Heinhuis, für sämtliche von Heinhuis eingegangenen Verträge sowie die ihnen vorausgehenden Verhandlungen gelten ausschließlich die Allgemeinen Geschäftsbedingungen von Heinhuis. Mit jeglicher Antwort erkennen Sie die Geltung der AGB von Heinhuis an und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA Baujahr: 2015 10-t-SAF-Achsen Eigengewicht: 22.250 kg Nutzlast: 57.750 kg Techn. Gesamtgewicht: 80.000 kg Nwsdpsy I An Hsfx Alajg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik funktioniert über NATO-Anschluss am Lkw Alubordwände am Schwanenhals Hydraulisch abnehmbarer Schwanenhals Luftfederung 5 m ausziehbar Funkfernsteuerung Baggerbrücke: 5.600 mm x 950 mm Bereifung: 235/75R17,5, 80 % Profil Abmessungen: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck Trailer: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2 Baujahr: 2015 10-t-SAF-Achsen Eigengewicht: 3.650 kg Max. Gesamtgewicht: 36.100 kg Sattellast: 16.100 kg Luftfederung Bereifung: 235/75R17,5, 70 % Profil Deutscher Anhänger! 4 Stück verfügbar! ID-Nr.: 484 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge sowie für alle von Heinhuis abgeschlossenen Verträge und den vorangegangenen Verhandlungen. Mit jeder Form der Kontaktaufnahme erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen einverstanden und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind reine Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA 2 steered axles Single telescopic, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical extension (telescopic): approx. 4,700 mm Fifth wheel height (laden): approx. 1,205 mm Loading height (max. laden): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm Fifth wheel offset: approx. 1,200 mm Swing clearance radius tractor unit (rear): approx. 2,300 mm Swing clearance radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 25,000 kg Bridge: - Extra-low 'SUPER LOW' design as an extendable vessel bridge - Length approx. 6,850 mm, with mechanical locking Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear - PENDLE-AXLE, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinder with automated RESET function - Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position - Technical axle load: 12,000 kg each - Hydraulic axle compensation Brake system: - WABCO braking system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Nsdpfx Aley Hxd Ijaewg Metallisation: - Complete HRM metallisation (High Resistance Metallisation) - Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Coating: - 6-coat finish - Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver grey - Drop side colour: Natural aluminium Steel construction: - Steel construction made from high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690Q/S700MC (yield strength 690 MPa) - MAG welding process according to EN ISO 4063

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 03/2003, yükleme alanı uzunluğu: 12.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.620 mm, toplam uzunluk: 12.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.620 mm, süspansiyon: hidrolik, lastik boyutu: 275 / 70 R22.5, renk: beż, Üretim yılı: 2003, Aks konfigürasyonu Lastik ölçüsü: 275 / 70 R22.5 Aks markası: SAF Süspansiyon: hidrolik süspansiyon Arka aks 1: Çift tekerlekli; kaldırılabilir aks; Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 2: Çift tekerlekli; Maks. aks yükü: 10.000 kg Arka aks 3: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Nwjdpfx Aleuu E S Soaeg Arka aks 4: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 5: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Ağırlıklar Boş ağırlık: 13.100 kg Yük kapasitesi: 61.900 kg Azami toplam ağırlık: 75.000 kg Fonksiyonel Yükleme alanı yüksekliği: 162 cm Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Finansal bilgiler Fiyat: Talep üzerine Ek bilgi Daha fazla bilgi için Stefan Schaapveld ile iletişime geçiniz.

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Nwedpeyhkrljfx Alaeg * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...