Kullanılmış Fliegl Dts 300 P 3-Achs Tieflader Plateau Hydr. Rampen satın al (53.132)

Koşul: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Redpfx Alerducps Set Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Koşul: yeni, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, WIESE 3-axle low-loader with ramps and wheel recesses – NEW Availability approx. 4 months from order ---Vehicle Data--- Manufacturer: WIESE Type: WSA 3-36 TL Year of manufacture: 2025 Axles: 3 Gross vehicle weight: 39,000 kg Fifth wheel load: 12,000 kg Axle group max load: 27,000 kg Unladen weight: approx. 9,500 kg Tyres: 235/70 R17.5 Brakes: WABCO EBS with RSS ---Dimensions--- Loading platform length: 13,450 mm Low-bed length: approx. 9,550 mm Gooseneck length: approx. 3,640 mm Overall width: 2,550 mm Loading height low-bed: approx. 920 mm Fifth wheel height: approx. 1,250 mm ---Equipment--- 3 x SAF axles (9 t) with air suspension 1st axle: Lift axle 3rd axle: Follower axle with steering (lockable) Electronic air suspension E-TASC WABCO EBS braking system with Roll Stability Support Tire pressure monitoring system for 12 tyres Complete LED lighting 4 x LED work lights 15-pin socket + 2x 7-pin sockets ---Body--- Robust steel frame 28 mm hardwood floor / omega floor 13 pairs of lashing rings (8,000 kg) Additional lashing points (5,000 daN) 2 pairs of wheel recesses Excavator arm recess Aluminium plug-in side boards on the raised platform Front-mounted toolbox ---Ramps--- 2 x aluminium drive-on ramps Dimensions: approx. 2,800 x 600 mm Load capacity: 27,460 kg Spring lift assistance Sideways adjustable ---Other Features--- Redpfxjyuq Igo Al Sjt Warning plates for overwidth up to 3 m Contour marking as per ECE-R48 Technical documentation and TÜV report For further information, please do not hesitate to contact us.

Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings Rodpfxohlz S Ns Al Sst • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Towing Bar / Flange Towing Eye: * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge Redsrwc R Rspfx Al Set ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Rsdporwc R Asfx Al Sst ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front landing gear (support winch) * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Pre-installation in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth sheet steel bulkhead * Bolt-on rear stanchions * Sideboards with spring-assisted lifting ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings at 600 mm intervals * One 6.3 t lashing ring in each corner front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN ----Ramps: * Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 16/2026

Koşul: yeni, azami yük ağırlığı: 37.619 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.240 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of manufacture: 2025 | NEW | 40-t ramps | Premium specification Location: Germany Condition: New / unused Availability: Immediate Description For sale: brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year 2025. Ideal for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – immediately ready for use. Technical Data Dimensions Total length: 13,190 mm * Platform length: 9,240 mm * Platform height: 875 mm * Total width: 2,550 mm (+600 mm with side extensions) * Gooseneck length: 3,950 mm * Unladen weight: approx. 10,381 kg Rodpfxsx Efzue Al Set Weights Perm. gross weight 80 km/h: 48,000 kg * Perm. gross weight 60 km/h: 52,800 kg * Total axle load: 30,000 kg * King pin load: up to 18,000 kg Chassis & Axles 3 BPW axles, air suspension, drum brakes * 1 trailing axle at the rear * Lift axle (load-dependent + automatic in-cab control) * Tyres: 245/70 R17.5, M+S + 3PMSF * Tyre pressure monitoring R141 * Wabco EBS 4S/3M, ABS + RSS * Wabco Smartboard (axle load, suspension, diagnostics etc.) Ramps & Loading Area Foldable 40-t loading ramps * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * 45-mm hardwood floor + chequer plate above wheel arches Load Securing Multiple 8,000 daN and 13,400 daN lashing points * 7×2 stake pockets + plug-in stakes * Container locks for 1×20 ft * Front wall 450 mm, side & rear walls in aluminium Body & Chassis High-tensile S700 MC steel * Partially metallized (Zn/Al 85/15) – enhanced corrosion protection * Rear angle: 10°, 500 mm * 2" king pin * Mechanical landing legs at front * 45-t supports at rear Equipment 2× toolboxes * All-round beacon * LED lighting * Rear work lights * Wheel chocks * Extensions 9×2 (up to +300 mm) * Stake box * Reflective marking on sides & rear Colour: RAL 3020 Traffic red For further information, please feel free to contact us.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 5.750 mm, yükleme alanı genişliği: 2.150 mm, yükleme alanı yüksekliği: 900 mm, dingil mesafesi: 1.000 mm, vites türü: diğer, şoför kabini: diğer, frenler: diğer, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and divided loading platform * Front section with mesh extension, electrically tipper on both sides * Behind that, flatbed/platform/low-loader with access ramps * Large flatbed area with phenolic plywood flooring and DIN tie-down rings * Ideal for landscaping, construction industry and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m with aluminium loading flaps * Payload: 2,230 kg * Tipping section dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping mechanism with wired remote control * 100 km/h approval * Tipping floor with steel base * Tridem axles Redpsxnqv Asfx Al Sst * Gross vehicle weight (GVW): 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the goods to avoid any misconceptions about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly encouraged. All details are given without guarantee. We assume no liability for errors or mistakes in the offer. The buyer is obliged to verify the condition and features of the goods/vehicles on their own responsibility. Subject to change, prior sale and errors.

Koşul: ikinci el, boş ağırlık: 10.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, For every used semi-trailer, you receive a current and complete inspection and function report. Chassis: - Robust steel frame welded construction with front frame step-down and level loading area, rear taper approx. 500x100 mm - Frame neck 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward as perforated side member - Loading area with extendable central frame, extendable by approx. 2,000 mm in 500 mm increments, pneumatically lockable - Frame before and after division with step 80x80 mm - Reinforced frame version / point load at the center of gravity in retracted position - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle up to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces, 2-part loading ramps special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electro-hydraulic unit) - Width approx. 800 mm - Wooden flooring - Inclined ribs on ramps - Fixable in driving position with tension belts - Operated by control lever, mounted at the rear right in the control box - Hydraulically laterally adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, each 10 t axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower device with total stroke approx. 200 mm - 2nd driving level via ball valve +50 mm - 1st axle: lift axle (wired via EBS), confirmation fully automatic with mechanical emergency control via push button on the trailer - 3rd axle as steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high Rsdpfjxxl E Hjx Al Sjt - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks including holders - Elongated license plate holder in the rear panel - 1 removable ECE plate at rear - 11 pairs ZK-modules 10t on the side: - 2x on the gooseneck - 2x on the loading platform before the extending frame - 7x after the extending frame - Extendable warning boards including 3 position lamps each, at the front on landing gear and rear before rear panel; steplessly extendable up to a loading width of 4,500 mm - 4 holders for plug-in warning boards in stake pockets on the loading platform - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of cross stake pockets for 100x50 mm stakes on gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on loading platform from outer frame inwards to main frame (1x before the extension, 1x after the extension, and 1x behind 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container

Koşul: ikinci el, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,300 kg Payload: 17,700 kg / 23,700 kg Overall length: 10,900 mm Loading length: total 8,600 mm, 6,500 mm including rear taper, 2,100 mm gooseneck Width: 2,550 mm Loading height: 900 mm Further information: - Robust welded construction made of high-tensile fine-grained steel Rjdpowrv Saefx Al Sot - Hot-dip galvanized - Rear supports - Twin tyres 235/75 R17.5 - Warning signs - LED reverse lights - Lashing points on outer frame - Lashing eyes: 4x gooseneck, 6x low bed (10,000 daN) - One-piece hot-dip galvanized loading ramps (3,100 mm x 750 mm) with 50 mm softwood covering, laterally adjustable - Toolbox in gooseneck - Plastic tool box - Bumper protection - Floor with 50 mm softwood covering - Rear climbing strips on loading slope

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Rsdpfxji Ri Ddo Al Sjt Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Rsdpfx Aleut Idne Set Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Koşul: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, havalı süspansiyonlu (yükseltme ve alçaltma fonksiyonlu), dingil yük kantarları, toplam platform uzunluğu yaklaşık: 9.100 mm, alçak yatak yaklaşık: 6.900 mm uzunluğunda, yükseklik yüklü durumda yaklaşık 890 mm, 24 x her biri 10 t bağlama noktası, dış şasi üzerinde 12 x dikme cebi, rampa ve arka eğimde tırmanma çıtası dışta, sürüş rampaları (yaklaşık 3.100 x 760 mm), rampalar yanlara ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya gergi kayışı için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretlemesi, tepe lambası, yay basınçlı park freni, dingil yük göstergeleri dahil, araç daldırma banyosu – sıcak daldırma galvanizli, , opsiyon fiyatı: rampaların hidrolik kaydırılması = Fiyat: 1.000 €, , -- Baskı hataları, değişiklik ve yanlışlıklarda değişiklik hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Redpfx Aloy Ifite Sot

Koşul: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, air suspension with lift and lower function, axle load weighing scales, total loading length approx. 9,100 mm, low-bed section approx. 6,900 mm long, loaded platform height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, lockable storage box with lid for lashing chains or tension straps, contour marking in accordance with regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle fully hot-dip galvanized by immersion bath, surcharge for: hydraulic ramp shifting = Price: €1,000, -- Printing errors, mistakes, and changes excepted, sample images --, More data at: !, More Details: ! Rsdpfx Aloy Ifg Eo Sst

Koşul: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, Yükseltme ve alçaltmalı havalı süspansiyon, Aks ağırlık kantarları, Toplam yük platformu uzunluğu yaklaşık: 9.100 mm, Düşük yatak yaklaşık: 6.900 mm uzunluğunda, Yüklü yükseklik yaklaşık 890 mm, 24 x bağlama halkası (her biri 10 t), 12 x dış çerçevede kazık cebi, Rampa (yaklaşık 3.100 x 760 mm), Rampa ve arka eğimde dış tırmanma şeridi, Yanlara ayarlanabilir rampalar, 68 mm kalınlığında ahşap taban, Zincir veya gergi kayışları için kapaklı saklama kutusu, Yönetmeliğe uygun kontur işaretlemesi, Çevresel uyarı lambası, Yaylı park freni, Aks yükü göstergeleri dahil, Araç daldırma galvanizli, Ek ücret: Redey H A Scepfx Al Sst Hidrolik rampa kaydırma = Fiyat: 1.000 € -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla bilgi için: !, More Details: !

Koşul: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, Yükseltme ve alçaltmalı havalı süspansiyon, Aks ağırlık kantarları, Toplam yük platformu uzunluğu yaklaşık: 9.100 mm, Düşük yatak yaklaşık: 6.900 mm uzunluğunda, Yüklü yükseklik yaklaşık 890 mm, 24 x bağlama halkası (her biri 10 t), 12 x dış çerçevede kazık cebi, Rampa (yaklaşık 3.100 x 760 mm), Rampa ve arka eğimde dış tırmanma şeridi, Yanlara ayarlanabilir rampalar, 68 mm kalınlığında ahşap taban, Zincir veya gergi kayışları için kapaklı saklama kutusu, Yönetmeliğe uygun kontur işaretlemesi, Çevresel uyarı lambası, Yaylı park freni, Aks yükü göstergeleri dahil, Araç daldırma galvanizli, Ek ücret: Hidrolik rampa kaydırma = Fiyat: 1.000 € Rsdpey H A Nusfx Al Sst -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla bilgi için: !, More Details: !

Koşul: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Flatbed, ABS, air suspension with lift and lower function, axle load scales, total loading length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slant, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment Price: €1,000, -- Errors, omissions and changes excepted, sample photos --, More data at: !, More Details: ! Rjdpsy Hfv Rsfx Al Sst

Koşul: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, hava yükseltilip indirilebilen hava süspansiyonlu, aks yükü terazisi, toplam yükleme platformu uzunluğu yaklaşık 9.100 mm, düşük yatak yaklaşık 6.900 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, 24 x her biri 10 t olan sabitleme halkası, dış çerçevede 12 x kazık yuvası, rampa ve arka eğimde dışta tırmanma şeridi, 2 parçalı sürüş rampası (yaklaşık 4.300 x 750 mm), rampalar yandan ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya germe kayışı için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretlemesi, döner tepe lambası, yay kuvvetli park freni, aks yükü göstergeleri dahil, araç daldırma galvanizli, ilave ücret karşılığında: hidrolik rampa kaydırması = Fiyat: 1.000 €. Yazım hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller. Daha fazla bilgi için: !, More Details: ! Redpfx Aloy E H Sqs Sjt

Koşul: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Flatbed, ABS, air suspension with lift and lower function, axle load scales, total loading length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slant, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment Price: €1,000, -- Errors, omissions and changes excepted, sample photos --, More data at: !, More Details: ! Redpfey Ethfox Al Sot

Koşul: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, air suspension with lift and lower function, axle load weighing scales, total loading length approx. 9,100 mm, low-bed section approx. 6,900 mm long, loaded platform height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, lockable storage box with lid for lashing chains or tension straps, contour marking in accordance with regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle fully hot-dip galvanized by immersion bath, surcharge for: hydraulic ramp shifting = Price: €1,000, -- Printing errors, mistakes, and changes excepted, sample images --, More data at: !, More Details: ! Redpfsy Eh S Sjx Al Sjt

Koşul: ikinci el, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1994, yükleme alanı uzunluğu: 13.030 mm, yükleme alanı genişliği: 2.600 mm, toplam genişlik: 2.600 mm, toplam yükseklik: 4.000 mm, Yük yatağı: 8.620 mm, arka eğim: 450 mm, genişlik: 2.600 mm, genişlik: 3.111 mm genişletildiğinde, uzatılabilir ve/veya katlanabilir genişletmeler, kuğu boynu: 3.960 mm, yük yatağı yüksekliği: yaklaşık 880 mm, hidrolik yana kaydırılabilir rampalar (UxG) 2.900x830 mm, elektrikli hidrolik pompa, kablolu uzaktan kumanda, her iki tarafta 2'şer ağır yük bağlama halkası, her iki tarafta 5'şer direk cebi, uzatılabilir uyarı levhaları, merkezi yağlama sistemi, destek ayakları, üç akslı hidrolik zorunlu yönlendirme, tambur fren sistemi, havalı süspansiyon, döner uyarı lambası, geri vites farı, araç reklam kaplamalı ve/veya yazılı olabilir. Rodpfxew Sb Sqj Al Set SI85616 Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu araç için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Flatbed, ABS, air suspension with lift and lower functions, axle load scales, overall platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = Price: 1,000 €, -- subject to errors, omissions, and modifications, sample images --, More data available at: !, More details: ! Rsdjyy Namjpfx Al Sst

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 15.900 kg, azami yük ağırlığı: 42.100 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2001, yükleme alanı uzunluğu: 8.960 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 12.950 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.800 mm, süspansiyon: hidrolik, lastik boyutu: 245/70R17,5, dingil mesafesi: 1.360 mm, azami hız: 90 km/s, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, Donanım: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration: 21.11.2001, Refurbished in 2014, Brakes renewed in 12/2025! 66,000 kg total train weight with 3-axle tractor, Gross weight: 58,000 kg, Fifth wheel load: 18,000 kg, Axles 1-4: 10,000/10,000/10,000/10,000 kg, Unladen weight: 15,900 kg, Exact dimensions can be found in the technical data sheet, Lowbed: 8.96 m + 5.50 m telescopic extension, Hydraulic supports front and rear allow lifting the trailer including 30 t load completely, e.g., for side ramp unloading, Rodpoyqm I Ujfx Al Sjt Hydraulic suspension (also allows leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (also countersteering possible), Hydraulic ramps + hydraulically extendable up to 3,000 mm, Loading platform extendable up to 3,000 mm, Tyres: 245/70R17.5 1A=6/6/6/6mm 2A=11/11/8/8mm 3A=9/9/7/7mm 4A=11/11/7/5mm, spare wheel 6mm, Further details on request. Sale only to businesses or for export. Leasing/financing available on request – immediate processing, also without down payment! More information and requirements on request. Vehicle description is for general identification only. All information, images, and descriptions are provided without guarantee! Equipment details should be verified separately if required. The seller assumes no liability for any errors in typing or data transmission. Subject to error and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We will gladly consider your used vehicle as part exchange, 30-day export license plates incl. insurance, EUR-1 and all customs export documents, TÜV / SP / UVV / tachograph inspection / OBU installation, Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location possible by arrangement, Installation of additional components or other individual customer requests possible by arrangement.

Koşul: ikinci el, azami yük ağırlığı: 23.360 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Üretim yılı: 2008, Donanım: ABS, Katlanabilir çift rampa, hidrolik, genişletilebilir Rsdpsx Sb D Iefx Al Sjt Durum: Pas lekeleri, genel olarak iyi

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Redpfsxrx Nljx Al Sjt Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Koşul: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized Rjdpfsuadk Nox Al Sst - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm