Kullanılmış Meusburger Mps-3 Libner 4M Ext. Lift satın al (48.136)

Koşul: ikinci el, azami yük ağırlığı: 29.561 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2022, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.340 mm, yükleme alanı yüksekliği: 1.400 mm, yükleme alanı hacmi: 24 m³, Donanım: ABS, ? Steel half-shell tipper body ? Cramaro electric cover ? Folding underrun protection ? Disc brakes ? ABS ? Air suspension with lift axle ? Support legs Dsdezbpblopfx Akyskn All information subject to change without notice / Sale subject to prior agreement.

Koşul: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust steel frame welded construction with front frame cranking and a flat loading area featuring a rear taper approximately 500x100 mm - Frame neck 200 mm with beveled corners - Sloped end at gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame at the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as perforated outer frame for securing with lashing straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Preparation for extendable load area widenings - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle up to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Special two-part loading ramps with mechanical extension Dkedpjzabnbofx Akysn - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Including anti-slip ribs on the ramps - Secured in transport position with lashing straps - Operation via control lever mounted at the rear on the right in driving direction - Hydraulically adjustable sideways Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing legs with single-sided operation and stroke compensation Axles, Steering, and Tires: - BPW air suspension axles, each with a 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle lift axle (wired through EBS), automatic confirmation with mechanical emergency activation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel carrier - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs of ZK-modules 10t on the sides: - 2x on the gooseneck - 9x on the loading area - Extendable warning boards, each with 3 position lamps, at the front on landing gear and at the rear before the end plate, steplessly extendable up to a loading width of 4,500 mm - 4 mountings for warning boards that can be inserted into stake pockets on the loading area - 6 pairs of side stake pockets for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward up to main frame (1x in the front area, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks for accommodation of 1x 20ft container - Rubber apron mounted on underrun p

Koşul: ikinci el, azami yük ağırlığı: 39.470 kg, toplam ağırlık: 48.400 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 2.550 mm, Üretim yılı: 2012, Donanım: ABS, 4-Axle Meusburger MTS-4 Lowbed Semi-Trailer VIN: WO9TS401C0M49438 Chassis / Attachments: * Air suspension with lifting and lowering function * First axle liftable * Axles 3 and 4 self-steering / friction-steered * EBS/ABS braking system * 4 x BPW ECO axles with drum brakes * Tyres: 205/65 R17.5 * Tyre tread remaining: Dkjdpfx Asy Trmvskysn * Axle 1: approx. 60% / 60% * Axle 2: approx. 30% / 60% * Axle 3: approx. 30% / 60% * Axle 4: approx. 30% / 60% * 6 x PVC toolboxes * 2 x spare wheels * Rear drop legs * Width extension panels * 6 pairs of heavy-duty lashing rings * 9 pairs of lashing points Body: * Lowbed semi-trailer * Upper deck length: approx. 3,650 mm * Lower deck length: approx. 9,870 mm * Total loading platform length: approx. 13,520 mm * Internal width: approx. 2,550 mm * Loading height: approx. 870 mm * 8 pairs of long stanchions * 1 pair of short stanchions * 6 pairs of external stanchion pockets * 1 pair of stanchion pockets upper deck * 1 pair of centrally positioned stanchion pockets upper deck Weights: * Permissible total weight: 48,400 kg * Unladen weight: approx. 8,930 kg * Payload: approx. 39,470 kg Miscellaneous: * German registration * TÜV valid until 11/2026 * Safety inspection (SP) valid until 05/2027 * Immediately operational New main inspections / safety checks or weight downgrades/upgrades can be arranged upon request. We can also assist you in obtaining export or temporary license plates, as well as organising vehicle delivery within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sales of new and used commercial vehicles. On a site of 11,000 sqm, you will find a wide selection of vehicles. Our company philosophy is characterised by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent full-service package and provide a competent point of contact to assist throughout the purchasing or selling process. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to assist you in arranging special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Customs formalities We are happy to help you with customs matters.

Koşul: ikinci el, boş ağırlık: 8.260 kg, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2019, yükleme alanı uzunluğu: 9.750 mm, yükleme alanı genişliği: 2.360 mm, yükleme alanı yüksekliği: 2.000 mm, yükleme alanı hacmi: 46 m³, toplam uzunluk: 9.750 mm, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 60 yüzde, dingil mesafesi: 6.600 mm, renk: beyaz, Üretim yılı: 2019, çalışma saatleri: 597.772 h, kilometre: 597.772 km, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference no. for inquiries: 41100 Schmitz, SKI 24 * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Used tarpaulin * Portal doors * WABCO SmartBoard * Air supply coupling head (red + yellow) * 2 x 7-pin connectors * 15-pin connector * Lifting and lowering device * Galvanized * Steel tipping body * Hardox tipping body * Access platform * Roll-up tarpaulin * Grain discharge slide * Swivel tailgate * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 8,260 kg * Payload: 30,740 kg * Permissible total weight: 39,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition 1st axle: 50% -- 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 70% -- 80% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 40% -- 60% - Tire size: 385/65 R22.5 * Wheelbase: 6,600 mm * Tire sizes: 385/65 R22.5 * Internal dimensions: L=9,750 mm, W=2,360 mm, H=2,000 mm * Internal volume*: 46 m³ * Pallet spaces: 24 * Steel combination door * With swing function and rubber seal * Grain discharge slide with cover * Body length: 9,750 mm * Central struts on side walls of body * Loading height unladen: 3,455 mm Disclaimer: Subject to change, prior sale, and errors. More images and videos available on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arrangement of all (export) documents Dedpfsyz Igzox Akyjkn * Ordering of export or customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please consult our trained experts, we are happy to advise you.

Koşul: ikinci el, boş ağırlık: 6.750 kg, azami yük ağırlığı: 24.750 kg, ilk tescil: 04/2011, bir sonraki muayene (TÜV): 10/2025, toplam genişlik: 25.500 mm, süspansiyon: hava, lastik boyutu: 425 / 65 R 22.5 / 6mm, ön lastik ölçüsü: 425 / 65 R 22.5 / 6mm, işletme ağırlığı: 31.500 kg,

Koşul: ikinci el, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 38.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.480 mm, yükleme alanı genişliği: 2.540 mm, Donanım: ABS, * 9008 – Vehicle ID for telephone inquiries * Low-bed semi-trailer, Type: MTS-3 * Special low-bed semi-trailer for aerial work platform transport with fold-down rear * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with lift/lower function, first axle liftable, third axle friction-steered with additional steering * Gooseneck, front wall, lashing eyes, storage boxes * 24 V electric pump via NATO plug * Electric winch * Radio remote control for winch and hydraulics * Rear loading platform hydraulically foldable up and down, hydraulic extendable ramp * Hydraulic ramp at the gooseneck, can be raised * Grating floor on the entire loading area * Technically permitted gross weight: 41,500 kg * Tires 1st axle: 235/75R17.5 (6 / 8 / 11 / 11 mm) * Tires 2nd axle: 235/75R17.5 (9 / 9 / 9 / 9 mm) * Tires 3rd axle: 235/75R17.5 (11 / 11 / 9 / 9 mm) ---Our e-mail address: Our service for you: - Procurement of temporary or export license plates - Nationwide delivery/transport within the EU - Customs clearance for vehicles to non-EU countries Dkodpoy I Iahjfx Akysn If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Koşul: ikinci el, kilometre: 478.294 km, güç: 295 kW (401,09 bg), ilk tescil: 03/2010, yakıt türü: dizel, boş ağırlık: 11.295 kg, azami yük ağırlığı: 14.705 kg, toplam ağırlık: 26.000 kg, lastik boyutu: 385/65R22,5, dingil konfigürasyonu: 6x2, bir sonraki muayene (TÜV): 07/2026, yakıt: dizel, frenler: motor freni, renk: kırmızı, şoför kabini: gündüz kabini, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: hava, koltuk sayısı: 2, ön lastik ölçüsü: 385/65R22,5, arka lastik boyutu: 385/65R22,5, azami hız: 90 km/s, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, elektronik denge programı (ESP), gripper hidrolik sistemi, hidrolik, hız sabitleyici, immobilizer sistemi, kabin, kamyon kaydı, klima, merkezi kilitleme, tır çekici bağlantısı, vinç, çekiş kontrolü, Satış irtibat kişileri: Frank Rau / Rusça / İngilizce / Almanca - Dsdpfx Asy Ity Hjkyskn Bachar Ibrahim / Arapça / İngilizce / Almanca - Tescil hizmeti, muayene (HU/SP/UVV), limana sevk 12 vitesli, çevre etiketi: 4 (yeşil), otomatik şanzıman, dizel, emisyon sınıfı: Euro 5, arka akstan tahrik, çekme kancası, klima, ana renk: kırmızı Donanım ekstraları ABS, mesafe ayarlı hız sabitleyici, çekme kancası, yol bilgisayarı, diferansiyel kilidi, ESP, kullanıma hazır, kepçe hidrolikleri, hidrolik (PTO), kabin, vinç, kamyon ruhsatlı, düşük gürültü, fiyat sorunuz (Mobile), hız sabitleyici, çekiş kontrolü, video, immobilizer, merkezi kilit, havalı süspansiyon, taşıma kapasitesi (kg): 14.705, sürekli fren (Börse): motor freni Kasa tipi: Axor 2543 2010 Terex TLC 145.2 Vinçli AMF damperli kamyon 6x2 kaldırma-yönlendirme aksı, HSN/TSN: 1313/000, frenli römork kapasitesi: 24.000, frensiz römork kapasitesi: 750 Hatalar olabilir. Arama alanları: mesafe ayarlı hız sabitleyici

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, ENGLISH Visit our website, where you will find our complete stock with many more photographs and information in several languages. SEL 8001 Djdpfx Aexpl Ntokyokn Meusburger MTS-3 Telescopic / 13,085 - 17,385 mm / Steering axle German registration 1st registration: 18.11.2008 Technical total gross weight (kg): 49,000 Permitted total weight (kg): 47,000 Unladen weight (kg): 7,670 VIN: W09TS300980M49145 TIRES AND AXLES: Tires: 245/70 R 17.5 Axle configuration: 3 axles BPW 3rd axle: Friction-steered trailing axle (passive steering axle) Air suspension Drum brakes OTHER SPECIFICATIONS: Telescopic trailer VEHICLE DOCUMENTS: Registration certificate part I Registration certificate part II M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLSKI, BOSNIAN Although every effort has been made to guarantee the accuracy of the information, we cannot accept any liability for errors or omissions. We kindly ask our customers to consult the available photos. The dimensions provided are approximate values. All vehicles are sold in their current condition. Prospective buyers are encouraged to visit our premises to personally assess the vehicle. A test drive can also be arranged. Please note that the vehicle's batteries supplied are those currently installed. Should new batteries be required, we are pleased to provide price information.

Koşul: ikinci el, azami yük ağırlığı: 36.250 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2015, yükleme alanı uzunluğu: 12.350 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.030 mm, Donanım: ABS, Meusburger platform dorse, 3 dingilli Tip: MPS-3 Fren: Disk fren Yük kapasitesi: 36.250 kg Dingil: BPW 1x kaldırılabilir dingil 2x destek noktası Platform: Uzunluk: 12,35 m Genişlik: 2,49 m Yükseklik: 0,80 m Finansman/leasing konusunda da iş ortaklarımızla sizlere memnuniyetle destek sağlıyoruz. Dkjdpfx Akey Iibtoysn Tüm bilgiler taahhütsüzdür. Hata ve ön satış hakkı saklıdır.

Koşul: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity Dedpfx Akjxnnk Dsyokn - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Koşul: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step Dkedpfexnym Djx Akyon - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Koşul: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer Dsdpfx Akowviwksyekn - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Koşul: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection Dkedpfxexgm S Ds Akyon - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Koşul: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer Dsdpswu Agiofx Akyokn - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Koşul: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: Dodpfxjwu A Slj Akyjkn - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Koşul: ikinci el, azami yük ağırlığı: 35.870 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2021, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 14.000 mm, Üretim yılı: 2021, Donanım: ABS, DOLL Tip H3L ? 14XL 3 dingilli tomruk taşıma yarı römorku, 3,5 m açılabilir teleskopik özelliğe sahip ve azami toplam uzunluğu 12.950 mm, iskelet tipi platform, 6x ExTe çelik payanda gövdesi Tip 144-S ile Ecco-Steal kare takozlar, şase üzerinde çeşitli kayış bağlama tertibatları, odun taşımada mümkün yükleme uzunlukları: 2x 6m, 2x 5m, 3x 4m, 3x 3m ve 14m'ye kadar uzun tomruk, SAF akslar 3x 9.000 kg havalı süspansiyonlu; kaldırma ve alçaltma fonksiyonlu, ABS, EBS'li disk frenler, 1. aks kaldırılabilir, son aks takipli döner, WABCO fren sistemi ve havalı süspansiyon için WABCO kontrol kutusu "SmartBoard", yük manometresi, kilometre sayacı vs., plastik alet sandığı sol arka yan, LED arka lambalar ve LED çalışma lambaları, 385/65 R 22,5 // 6 adet lastik, teknik olarak mümkün toplam ağırlık 42.000 kg, boş ağırlık 6.130 kg, 1. el, iyi genel durum, Alman taşıt ve Alman evraklı! Satış sadece ticari müşterilere! Tüm bilgiler garanti verilmeden sunulmuştur! Hatalar ve ara satışlar mümkündür! Dedpfx Akjyqcbqjyskn

Koşul: ikinci el, azami yük ağırlığı: 17.120 kg, toplam ağırlık: 24.200 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2007, Donanım: ABS, Vehicle identification number: W09PT300770M49888 Unladen weight: 7,080 kg German inspection (HU) due BPW Eco axles with drum brakes Axle 1: LIFTABLE Axle 3: FRICTION-STEERED Air suspension Platform dimensions: 7,900 x 2,540 mm – loading height: 800 mm Overall length as per vehicle registration: 9,195 – 11,195 mm 2 pairs of wheel recesses incl. extendable cover and loose wooden planking Djdpfx Akjyvmw Isyskn 2 pairs of wheel recesses incl. cover, each between 1st and 2nd axle and between 2nd and 3rd axle Hydraulically extendable drawbar – 50 mm eye Hydraulic extension at rear Tyres: 205/65 R 17.5 Spare wheel holder WITH spare wheel Modifications, intermediate sale and errors are expressly reserved. This description is intended for general vehicle identification and does not constitute a warranty in the legal sense of sales law. The description according to the purchase contract shall be decisive. Our offer is generally without a new technical inspection (TÜV). If you require a new TÜV inspection, we will gladly provide you with an offer from our partner workshops! Vehicle may be stickered or marked with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2017, Meusburger MTS-3. Baujahr: 2017. 10 Tonnen BPW-Achsen. Max. Gesamtgewicht: 38.500 kg. EBS, ABS, ALB. Hydraulik vom Auflieger über NATO-Anschluss einsetzbar. Gelochter Boden. Hydraulische Verbindung vom Boden auf den Schwanenhals: - Länge: 3.450 mm. Seilwinde. Hydraulisch ausziehbare Rampe. Luftfederung. Dsdpfx Asy Dvi Askyekn 3. Achse: Nachlauf-Lenkachse. Abmessungen: Schwanenhals: L: 3.370 mm. B: 2.550 mm. H: 1.300 mm. Sattelhöhe: 1.150 mm. Ladefläche: L: 7.100 + 2.750 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 50% Profil. Deutscher Trailer! ID-Nr.: 528. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge der Firma Heinhuis, alle von Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Durch jede Form der Reaktion erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis einverstanden und bestätigen, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2017 zul. Gesamtgewicht: 38.500 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2018, Meusburger MTS-3. Baujahr: 2018. 10 t BPW-Achsen. Dksdjy Ayyvspfx Akyjn Eigengewicht: 11.700 kg. Nutzlast: 36.300 kg. Zulässiges Gesamtgewicht: 48.000 kg. Sattellast: 18.000 kg. 1. Achse Liftachse. 3. Achse Nachlaufachse. Luftfederung. Geschlitzter Boden. Seilwinde. Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3420 mm. Hydraulik funktioniert über NATO-Stromversorgung vom Zugfahrzeug. 2-Punkt hydraulische Abstützungen am Heck. 2-Wege hydraulische Rampen: - Hydraulisch von links nach rechts. - Länge: 4600 mm. Werkzeugkästen. Abmessungen: Schwanenhals: L: 3750 mm. B: 2550 mm. H: 1440 mm. Königszapfenhöhe: 1200 mm. Tiefbett: L: 9730 mm. B: 2550 mm. H: 900 - 950 mm. Bereifung: 70%. Deutscher Auflieger! ID-Nr.: 408. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle mit Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Durch jede Art von Reaktion akzeptieren Sie die Geltung dieser Allgemeinen Geschäftsbedingungen und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettopreise für den Export. = Weitere Informationen = Baujahr: 2018 Leergewicht: 11.700 kg Zuladung: 36.300 kg zGG: 48.000 kg = Firmeninformationen = Für mehr Informationen: WhatsApp:

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 8.000 kg, ilk tescil: 04/1978, toplam uzunluk: 12.350 mm, toplam genişlik: 2.500 mm, süspansiyon: çelik, lastik boyutu: 245/70R17.5, Üretim yılı: 1978, Van Hool düşük şasi römork - 3 dingil - Rampa - Uzatılabilir Model Yılı: 12-4-1978 Şasi Numarası (VIN): 3899 Plaka: OX-84-88 Muayene (APK/TÜV): Dsdpfjyrrupox Akyskn Uzatılabilir Çelik süspansiyon Yükleme rampaları = Daha fazla bilgi = Dingil konfigürasyonu Lastik ölçüsü: 245/70R17.5 Süspansiyon: Yaprak yay Arka dingil 1: Çift lastik; Maks. dingil yükü: 8.000 kg Arka dingil 2: Çift lastik; Maks. dingil yükü: 8.000 kg Arka dingil 3: Çift lastik; Maks. dingil yükü: 8.000 kg Ağırlıklar Boş ağırlık: 8.280 kg Yük kapasitesi: 30.720 kg Azami toplam ağırlık: 39.000 kg Durum Teknik durumu: iyi Görünüm durumu: iyi Kimlik Plaka: OX-84-88

Koşul: ikinci el, azami yük ağırlığı: 29.690 kg, toplam ağırlık: 37.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2002, Üretim yılı: 2002, Donanım: ABS, Curtain-sided low-loader Meusburger MPG 3 Dedpfxjwrvubs Akyokn Dimensions: Length 13.90 m, Width 2.55 m - 3.50 m (rear stanchions), Height 4 m Loading dimensions: Platform height 80 cm, inner height of recessed deck 3.20 m, recessed deck to gooseneck 67 cm, inner height gooseneck 2.53 m Condition: Good for its age Tyres: 205/65R17.5, 50-70% tread remaining

Koşul: ikinci el, azami yük ağırlığı: 26.040 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2010, Üretim yılı: 2010, Donanım: ABS, Semi-trailer Meusburger MPS-2, steered axles, Palfinger PK 26002 crane, radio control, 3 extensions, 4 m lifting capacity: 5,700 kg, 10 m lifting capacity: 2,250 kg Tractor unit: MAN TGS 26.440 6x2, Euro 5 EEV, retarder, dual-circuit hydraulics Dedpfx Asrbf Uhokyokn Condition: Minor rust spots, otherwise good; technically very good Tires: 80-90%

Koşul: ikinci el, azami yük ağırlığı: 26.520 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2012, Üretim yılı: 2012, Donanım: ABS, Semi-trailer Meusburger MPS-2, steered axles, crane Palfinger PK 26002 with radio control, 4 extensions incl. rotator, 4m 5,500 kg, 12m 1,700 kg Tractor unit: MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics Djdpfx Ajrcz Izskyjkn Condition: very good, TÜV approved Tyres: 65-95%

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 09/2004, toplam genişlik: 2.470 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2004, Donanım: ABS, General Information Color: Purple Registration number: OH-50-PT Axle Configuration Axle manufacturer: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Lift axle; Max. axle load: 9,000 kg Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Functional Extendable body: Yes Condition Technical condition: good Visual condition: good Further Information Please contact Arie for more information. = Additional options and accessories = Djdpfxeylpf Es Akyokn - Lift axle - Air suspension - Twist-locks

Koşul: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps. Djdpfxeywv Ixe Akyokn