Kullanılmış Müller-Mitteltal 14,4 To. Plateau, Luft, 3 M. Cont.- Verriegelung satın al (60.943)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 volt
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic Toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Provision in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center
* Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use
* Screw-mounted rear posts
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points
----Ramps:
* Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
----Loading Height:
Kdedpfsmi Tcqox Alzjl
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized
* ---Axles, air tank, flange towing eye, and landing gear painted in black---
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
ANDELST
2.692 km
Düşük yükleyici
Muller Mitteltal3-assige dieplader met oprijrampen Machine / He...
Çağrı
Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2015, toplam uzunluk: 14.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.050 mm, süspansiyon: hava, lastik boyutu: 235/75 17.5, dingil mesafesi: 1.300 mm, Üretim yılı: 2015, Donanım: ABS, = Further Options and Accessories =
- EBS
- Rear air suspension
= Remarks =
- Müller Mitteltal 3-axle low-loader
- 3 × 10,000 kg axles
- Fifth-wheel load: 11,000 kg
- Load platform dimensions: length 930 cm × width 252 cm
- Loading height: 98 cm
- Covered neck dimensions: length 500 cm × width 264 cm
- Neck loading height: 144 cm
Kdsdpfey I Axxex Alzel
- Sliding tarp left and right
- Dimensions of the hydraulic loading ramp:
- Section 1: 270 × 235 cm
- Section 2: 180 × 235 cm
- Lashing points
- 2 storage boxes
Well-maintained and robust low-loader, ideally suited for transporting, among other things, machinery, forklifts, and access platforms!
= Further Information =
Axle configuration
Tyre size: 235/75 17.5
Suspension: Air suspension
Rear axle 1: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50%
Rear axle 2: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50%
Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; tyre tread left inner: 30%; tyre tread left outer: 30%; tyre tread right inner: 30%; tyre tread right outer: 30%
Weights
Curb weight: 10,700 kg
Payload: 25,300 kg
Gross vehicle weight: 36,000 kg
Condition
Technical condition: good
Cosmetic condition: good
Product Safety
Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering function
Kodjl Tihxepfx Alzjdl
* Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange tow eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 ton GVW design with reinforced frame and reinforced axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture on the front bulkhead for optional retrofitting of container locks
* Bolted smooth steel sheet front wall
* Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion
* Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm
* Option for installing 3 ton folding lashing brackets every 600 mm
* Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN
* In each corner front and rear: 1 x 10 ton lashing ring
* Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Küçük ilan
Göttingen
2.411 km
Alçak yükleyici
Müller-MitteltalT3 Kompakt - Dreiachs-Überfahr-Tieflade-Anhänger - Luft - Auffahrrampe
Çağrı
Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç
Üç dingilli alçak şasi geçişli treyler
Rampalı alçak şasi treyler
Ağır yük taşımacılığı
Tip: T3 Kompakt 30,0
Uzunluk: 8500 mm
Genişlik: 2500 mm
Hava süspansiyonu
Ticari/İhracat net fiyatı - 15.990 €
Değişiklik, ara satış ve hatalar saklıdır
=====
Telefon2
Mobil
=====
Kdedpon Aw Hksfx Alzjl
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜ-TA-R 21 Plateau 7m, luftgefedert, LED
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer
Ref. for inquiries: 27963, available end of March 2026
NEW VEHICLE including COC
* GVW: 21t, Payload: 16.50t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports
* Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm
* Platform height approx. 910 mm loaded / approx. 940 mm unloaded
* Load area: 7,000 mm with 400 mm high front wall
* Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating,
* Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation
* Load securing package (La-Si-Paket):
* 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members
* 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame
* 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN
* Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members
* Prepared for retrofitting container locks
* Softwood (spruce/fir) floor, 50 mm thick
* Gigant axles with air suspension including EBS 2S/2M
* Lifting and lowering function
* 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors
* 1 plastic toolbox positioned in driving direction right, in front of the front wall
Kdedpfjyuq R Uox Alzel
* LED lighting system
* 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground
* 2 LED reversing lights at the rear
* Flashing side marker lights
* Oversize load warning sign
* 1 removable all-round LED beacon including holder and installation
* Rear folding supports, front support foot with gear winch
----
Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value
Other terms with/without down payment or residual value are possible!
We are an authorized MüllerMitteltal dealer
----
* Our opening hours:
* Mon-Thu: 08:00-17:00
* Fri: 08:00-15:00
* Outside these hours, we are available by appointment
* We speak German, English, Russian, Polish, and French
* Leasing, financing, trade-in possible
Küçük ilan
Aichach
2.196 km
Alçak şasi dorse
MÜLLER-MITTELTALTS3 hydr Rampen GIGANT LUFT
Çağrı
Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli)
Kdedpfx Alew Tgkbozjl
* İlk tescil: 11/2004
* 3 aks
* Havali süspansiyon
* Gigant akslar
* Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir
* Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir
* Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m
* Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m
* Destek ayakları
* Boş ağırlık: 10.260 kg
* Teknik toplam ağırlık: 47.000 kg
* Muayene geçerlilik: 08/2026'ya kadar
* Genel muayene: 02/2026'ya kadar geçerli
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* Two SAF axles
* First axle as lift axle (fully automatic)
* Lift axle ride height +30 mm via actuator cylinder
* Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12/24V
* 2 LED reversing spotlights switched with reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via rear lamp circuit
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable pin towing coupling (use only with underrun protection retracted)
* Enclosed plastic half-shell single fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side underrun protection usable as advertising space
----Hydraulics:
* Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023)
* Base frame made from high-tensile fine-grained steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Hooklift controlled via remote control
* Remote control with quick function for lowering, not for lifting
* Emergency stop switches, left and right
* Container supports with four pads per side and one roller at the rear on each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist in lifting the main arm
* 2 mechanical drop-down supports at the rear
* Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open.
* Monitoring system for underrun protection ensuring it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in black
* Palfinger hooklift painted in black/yellow
Kedpfx Asyfy Rrslzjdl
----Infos:
* Errors and prior sale excepted
* Vehicle is in very good / like-new condition
----Container: Dimensions:
* Load length: 5,500 mm
* Load width: 2,300 mm
* Load height: 1,000 mm
Infos:
* Mountings for hook systems avail...
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via actuator cylinder
* Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Radio remote power supply 12+24 V via tail light
Kdjdpox Dp Atofx Alzjl
----General Attachments:
* BPW landing gear front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Drop-in-pin towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the bulkhead, left side
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side
* Enclosed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-tensile fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of the hooklift device via remote control
* Remote control with fast function when unloading but not when loading
* Emergency stop buttons on both left and right sides
* Container saddle with 4 supports per side and 1 roller at the rear per side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves.
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
Kodpfx Asx Dp Agjlzjdl
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x SAF axles, rated for high load
* First axle configured as lift axle (fully automatic)
* Lift axle travel height +30 mm via height-adjustment cylinder
* Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flanged Eye:
* 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control: 12+24 V via tail light circuit
----General Equipment:
* BPW manual landing gear at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single wheel guards
* Double access step, front left of the bulkhead
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side
* Enclosed side underrun protection, suitable for use as advertising space
----Hydraulics:
* Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation)
* Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame constructed from high-tensile fine-grained steel
* 20,000 kg traction force
* Hook height: 1,570 mm
* Hooklift controls via radio remote
* Quick function available for discharging, not for loading
* Emergency stop button on both left and right sides
* Container mounts: each side with 4 supports plus 1 rear roller each
* Hydraulically operated rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at rear
* Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves
* Monitoring system ensuring underrun protection is retracted before tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
Kdsdpfx Aox Dp Amslzjl
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized
* Axles, air reservoirs, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Internal length: 5,500 mm
* Internal width: 2,300 mm
* Internal height: 1,000 mm
Information:
* Mounting brackets for hook s
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-actuated cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Towing Eye / Flange Tow Eye:
* Towing bar adjustable in height by 300 mm
* 40 mm flange tow eye
----General Attachments:
* Jost landing gear front
* Exterior folding support legs at the rear
* Plastic toolbox, front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
Ksdpfxsl Th Nro Alzodl
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood floor
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals
* Option to equip with 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes for 1.2 t lashing options in the front and rear crossmembers
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Approach slope at the rear approx. 860 mm chassis height
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, 40 mm flange tow eye painted in black
* Sideboard painted RAL2011 deep orange
* Painting of side panels in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release system for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar, 300 mm range
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External foldable support legs at the rear
* Plastic toolbox, front right, mounted externally on the front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ (tyre pressure monitoring)
* LED lighting
----Loading Platform:
* Loading length 5.37 m
* 50 mm softwood floor
* Bolted front bulkhead made of smooth sheet steel
* Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist
* Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis height
----Tyres:
* 235/75 R 17.5 tyres
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
Kdodpfsl Th Ncex Alzsl
* Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted black
* Drop sides painted in RAL2011 deep orange
* Sides can be painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex works Egestorf
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Kedoy Tln Topfx Alzsdl
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Kedpfx Aoy Rr Ihslzsdl
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to, Luft, Seitliche ALU Wände, Rollplane
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18
----Braking System:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 9 t Gigant axles
----Suspension:
* Air suspension with level control during tipping
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required-
* 15-pin power connector
* LED lighting with galvanized protective cover
Kedpfx Aox Ipbyelzodl
* 2 LED reversing lights
----Drawbar / Towing Eye:
* Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate)
----General Attachments:
* Support winch at front
* Foldable galvanized steel underrun protection for paver feeding
* Closed single plastic mudguards
* Front wall platform made of grating with access step at drawbar and handrails on the front wall
----Chassis:
* Chassis made of high-tensile fine-grain steel
----Tipping Body:
* 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist
* Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor
----Tarpaulin:
* Rolling tarpaulin - agate grey similar to RAL 7038 -
* Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear
----Painting:
* Chassis, underrun protection, and drawbar hot-dip galvanized
* Axles, air tanks, support winch, and flange-type towing eye painted in a black tone
* Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t
* New vehicle without initial registration including manufacturer's warranty
* Subject to errors and prior sale
* Sample images (photos may differ due to optional equipment)
----Delivery time:
* Vehicle available from week 42/2026
Küçük ilan
Wiesmoor
2.630 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 14,4 Tandem Dreitseitenkipper m. Anleger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 10.960 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Yükleme uzunluğu: 5.000 mm
Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.500 mm
Yükleme yüksekliği: yaklaşık 1.100 mm
Diğer bilgiler
- Çelik
- Sıcak daldırma galvanizli
Kdsdpfsytma Ajx Alzol
- Alüminyum yükleme rampaları
- Rampa saklama bölmesi
- 500 mm katlanabilir yan korkuluklar
- Yan korkuluk yayları
- Gigant akslar
- Lastik ebadı 285/70R19,5
- Yüksekliği ayarlanabilir çeki kolu
- Ön ve arka destek ayağı
- Plastik alet kutusu
- Ön tırmanma basamağı
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Çağrı
Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4:
* EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation front and rear
* Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation
* Warning sign packages front & rear
* Contour marking tape on sides and rear, reflective
* EBS multi-voltage system for 12 & 24 V electrics
* Removable rear LED beacon
* 24 V – 15-pin and additionally 12 V – 7+4 pin power cable
* Extended connector lines for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side
* Closed single mudguard at the front (plastic)
* Straight steel mud flaps at the rear, each with spray suppression
* Side underrun protection
* Extended offset cranking by 500 mm forwards
* Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable
* Chassis made of high-strength fine-grained steel
* Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood
* Outer planks of loading ramps made of 50 mm bamboo wood
* Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility
* Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope)
* Widening planks stored sideways left in storage compartment
* Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm
* Mechanical drop legs at rear
* Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm
* Hydraulic lateral ramp displacement on sliding tube from ramp shaft
* Loading area above slewing ring: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Loaded deck height approx. 860 mm (including 860 mm approach slope)
* Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized
* Axles, springs, air tanks, and slewing ring painted in black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Available from week 21 / 2026
Kedpfx Aorczm Dolzjdl
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Çağrı
Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation, front and rear
* Tire pressure monitoring system with cab display option via EBS signal – no installation required on the truck side
* Warning sign package front & rear
* Reflective contour tape, side and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable rear LED beacon
* 24 V – 15-pin and additional 12 V – 7+4-pin power cable
* Extended connection cables for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye and stepless height adjustment
* Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side
* Closed single plastic mudguard front
* Straight rear steel splash guards, each with spray suppression
* Side underrun protection
* Extended offset by 500 mm to the front
* Extended turntable platform at the front by 520 mm with 45° corners and three recessed storage compartments incl. lid, lockable
* Chassis made of high-strength fine-grained steel
* Floor over turntable platform made of 50 mm softwood, low-bed platform floor made of 60 mm softwood
* Outer planks of ramps made of 50 mm bamboo wood
* Four stake pockets per side (no stakes supplied), each with 2 t lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; one pair of 13.4 t lashing rings at the front and rear outer frames; four pairs of 10 t swivel and retractable lashing rings per side, loadable in all directions and integrated into the outer frame; two pairs of 6.4 t lashing rings on the side in the excavator stick rest; eight pairs of galvanized folding outriggers for 3 m overall width (not on rear incline)
* Widening planks stored left side in storage compartment
* Excavator stick rest over rear axle to end of rear incline, approx. 2,300 x 740 x 190 mm
* Mechanical rear support legs
* Hydraulic, hot-dip galvanized ramps, approx. 3,000 x 720 mm
Kjdpfx Asl Th Evslzodl
* Hydraulic side ramp displacement on guide tube from ramp shaft
* Loading area above turntable: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Laden loading height approx. 860 mm (incl. 860 mm rear incline)
* Chassis, turntable, ramps, and rear mechanical support legs hot-dip galvanized
* Axles, springs, air tanks and turntable painted in black tone
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 21 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALRS-T 18,0 to. Cont.- Schlittenanh. verzinkt NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release mechanism for spring brake cylinders
* Disc brakes
* Duomatic brake coupling
* 2 x 10 t SAF axles
* Air suspension with automatic lowering when uncoupling the brakes
* Drawbar, 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle
* Right-side plastic toolbox, enclosed plastic fenders
* Side closed underride protection, usable as advertising space
* Rear underride protection with 2 impact buffers
* Foldable "A" sign at the rear for waste disposal
* LED rear lights with protective cover
* 2 x 7-pin power sockets
* Chassis hot-dip galvanized (excluding air tank, axles, drawbar, etc.)
* Roller conveyor length approx. 6,950 mm
Ksdpfxsl Tqkws Alzjdl
* Rolling container secured by pneumatic 4-point claw locking system
* At the front, 2 plug-in container stops with 2 additional plug-in positions
* Unladen ride height approx. 1,165 mm
* --Technically permissible gross weight of 20,000 kg--
* Suitable for 5,000 – 7,000 mm container lengths
* New vehicle with manufacturer's warranty
* Errors and intermediate sale excepted
* Immediately available ex works Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALRS-T 18,0 to. Cont.- Schlittenanh. verzinkt NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
Kdjdpfxel Tpy He Alzsl
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinder
* Disc brakes
* Duomatic brake coupling
* 2 x 10 t SAF axles
* Air suspension with automatic lowering when the brake is uncoupled
* Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle
* Plastic toolbox on the right side, closed plastic fenders
* Side closed underride guard usable as an advertising surface
* Rear underrun protection with 2 crash buffers
* Folding "A"-board at the rear for waste disposal
* LED rear lights with protective canopy
* 2 x 7-pin electrical plugs
* Chassis hot-dip galvanized (except air tank, axles, drawbar, etc.)
* Roller track length approx. 6,950 mm
* Rolling container secured with pneumatic 4-point claw locking system
* At the front are 2 plug-in container stops with 2 additional plug-in positions
* Ride height unladen approx. 1,165 mm
* --Technically permissible gross weight of 20,000 kg--
* Suitable for container lengths of 5,000 – 7,000 mm
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Stuhr
2.555 km
Çalışma platformlu römork
MÜLLER-MITTELTALGR-TA 18 Pritsche*Container*TwistLock*Kamera*TOP
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi
? alçaktan bağlı
? 50 mm çekme halkası
? konteyner kilidi
? her iki tarafta 12 bağlama halkası
? geri görüş kamerası
? kampana fren
? duomatic bağlantı
? ABS
Kdodpfexb Ig Ssx Alzsl
? havalı süspansiyon
? alet kutusu
? EBS
? destek ayakları
? ikiz lastik
? BPW akslar
Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Stuhr
2.555 km
Açık dorseli römork
MÜLLER-MITTELTALGR-TA 18 Pritsche*Container*TwistLock*Kamera*TOP
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi
? Alçak bağlantı
? 50 mm çeki halkası
? Konteyner kilitleme
? Her iki tarafta 12 sabitleme halkası
Kedpfxoxb Iglj Alzjdl
? Geri görüş kamerası
? Kampana fren
? Duomatic bağlantı
? ABS
? Havalı süspansiyon
? Takım sandığı
? EBS
? Destek ayakları
? İkiz tekerlekler
? BPW akslar
Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.
Küçük ilan
Dabrowa k/Opola
1.891 km
Mikser
Müller-MitteltalLIEBHERR NACZEPA BETONOMIESZARKA 10m3
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton
Ksdpjx Utq Sefx Alzjdl
Boş ağırlık: 6.530 kg
Yük kapasitesi: 25.470 kg
Azami toplam ağırlık (zGG): 32.000 kg
Küçük ilan
Regensburg
2.150 km
Alçak şasi römork
MÜLLER-MITTELTALPT 30,0 KOMPAKT GERADE FLÄCHE CONTAINER Nr.: 540
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540
STRAIGHT LOAD BED
Container Locking System
Unladen Weight: 8,000 kg
German Inspection (HU): Due
Gigant Axles with Drum Brakes
Air Suspension
Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4
Kjdpfx Astuhv Rslzedl
Extendable to 3,000 mm with Lighting
Drawbar – 50 mm
Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm
Support System
Tyres: 235/75 R 17.5
Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract.
Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.
Küçük ilan
Bovenden
2.411 km
Mobil beton santrali
Müller-MitteltalMÜLLER MITTELTAL SF32, Liebherr Betonmischer
Çağrı
Koşul: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear
Kdjdpoi Rk Axsfx Alzol
Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles!
Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 14,4 to. plateau, luft, 3 m. cont.- verriegelung"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.





































































































































































































































































































































































































































































