Kullanılmış Müller-Mitteltal 14,4 To. Plateau, Luft, 3 M. Cont.- Verriegelung satın al (61.049)

Koşul: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0 2 Loading Heights and Ramps * Fifth wheel load increase from 12 t to 18 t included. King pin mounted in: Second king pin position 2", king pin up to and including Gooseneck 2,750 mm. Rear swing radius approx. 2,400 mm (recommended minimum clearance: 150 mm). Forward swing radius 1,480 mm or 1,570 mm with spare wheel. Note: Adequate clearance to the towing vehicle must be ensured by the customer. * Pull-out sections for the wheel wells front and rear (205 mm deep). 6 removable planks for wheel well mounting brackets as receive slots according to code 09.112 ALU air tank instead of steel. * Smartboard control box mounted as an infotool on the trailer with pressure sensors for total axle load display. Display options either via the control box or in the truck via the EBS air suspension system (depending on truck manufacturer) * ?SP-combi package: Toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the saddle platform W=2,480 x H=500 mm with folding top cover, side doors and angled Alu side walls foldable to the saddle platform (500 mm high), ALU rear wall plug-in (150 mm high), ALU boards inside and outside painted RAL 9006 white aluminum. Incl. folding and removable rear stanchions, galvanized (without top coat). Incl. bolted front section. Front cross member length to gooseneck 3,935 mm. Forward swing radius without spare wheel with gooseneck measurement 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm. * 2 container locks recessed in the front cross member * 3 storage compartments under the saddle platform for storing optional ALU loading ramps or wooden planks for wheel well covers * Folding outriggers / extendable outriggers (galvanized) and wooden planks for widening incl. (not on the rear slope), plank storage on the saddle platform (maximum load track width 2,500 mm) * Second LED position light in the warning package at front and rear (double lighting), only in conjunction with the warning package * 2 LED reversing lights at the rear of the trailer, activated with reverse gear (suitable for 12V and 24V), a maximum of 2 extra units permitted * 7-pin socket at the rear, allocated for overlength illumination with tail light (58 R) and ground * Rubber lining on the entry slopes left and right (approx. 860 mm long) 190 07644 rubber strip, on the inner plank of the single-piece ramps * Fully automatic central lubrication system with pump (24V), grease container and integrated trailer control unit, without ramp connection (for steering: incl. connection to the distributor on the saddle platform), Note: Only for towing vehicles with 24V lighting system! Subject to prior sale and errors excepted! Iiodpfxey R Ipus Ab Tob Sale exclusively under our General Terms and Conditions Important notice: Despite careful checking of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of the various platform providers. For this reason, we would like to point out that all information is provided without guarantee and does not constitute any legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute any ...

Koşul: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed deck with platform extension * Hydraulic loading ramps, adjustable (2 units) * Drivable gooseneck * Additional rear supports * Turntable design ----Dimensions & Loading Platform * Loading platform length approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892 ----Errors and prior sale reserved ----Advertising and various inscriptions have been digitally removed. -----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV or safety inspection Complete export processing Financing arrangement Application for export licence plates Vehicle transfer Vehicle registration Vehicle recovery and transport Ijdpfey Skl Ijx Ab Teib ?YOUR VTS TEAM

Koşul: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 04/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * LIKE NEW and available * Inquiry Reference Number: 11652 * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at front, spring-assisted square tube supports at rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm draw eye (height adjustable in mm) * 15-pin power connector * LED lighting Isdpfx Absy R Hx Us Tjib * 315/80 R 22.5 tires, full steel mudguards * Swiveling cable drum attachment * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped for adjustment * For drum diameters Ø 800-3,000 mm x (1,700 mm width between drum arms) * With locking clasp to secure drum at the support arm ends and a central claw lock to secure the cable drum attachment to the chassis * Motor-hydraulic operated pull and push cylinders with pipe rupture safety. Control valve with automatic neutral return, pressure relief valve, and lowering throttle. Hydraulic connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed control and brake for the drum drive * Additionally, hydraulic pump unit with Hatz 1B30 Silent diesel engine and manual starter, 6.5 HP (150 bar), pressure supply selectable via truck hydraulics or integrated pump unit by switching supply lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated in the side protection, exterior polyester-coated in RAL white * ----Like new condition (used for only 1 project) * ---- * Financing available via our partners, with or without down payment or residual value and various terms possible. Request your offer! * We are an authorized Müller Mitteltal dealer! * Example hire purchase via our partner FM LeasingPartner starting from just €595/month net for a 60-month term (without down payment or residual value). * Request your personal offer! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside those hours, appointments are available upon request. * We speak German, English, Russian, Polish, and French. ----

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function via RtR valve * Smart-Board for infotool * Side underrun protection * Swing-out support legs at the rear chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight galvanized steel splash guards, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox located on turntable platform * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * 4 stake pockets on each side, each with 2 t lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant swivel and lowerable lashing rings, loadable in all directions and recessed in the outer frame (corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at rear slope) * Widening planks stored in the center of the loading area * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm Iiedol Tpwyspfx Ab Tjb * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tank etc. painted in black tone * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVWR * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available approx. week 32 / 2026 * Sample photos

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear Iiedpfx Abjl Thxdj Tsb * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps Iedpfxjx Ipbgj Ab Teib * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm Iedpfx Absx Ipb Hs Tsib * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires Iiodpfx Abjl Th Ads Tjb * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raise/lower function and RtR valve * Smart-Board as infotool * Side underrun protection Iisdpfxjl Tq Euj Ab Tsb * Rear swing-out supports on chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender panels, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on turntable platform * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with integrated 2 t lashing points * Load securing package includes: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame (13.4 t at corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at the rear chamfer) * Widening planks stored in the center of the loading platform * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally * Excavator boom trough above the rear axle up to the end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted on the sides of the trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm rear approach slope) * Chassis, turntable, towing bar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air reservoir etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. week 32 / 2026 * Sample images

Koşul: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * RDÜ tire pressure monitoring system * EBS brake system, drum brakes, BPW axles, parabolic springs * Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights * Tow bar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully covered steel mudguards * Swiveling cable drum superstructure * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepped polyamide centering cones * Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms) * With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake. * Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated into the side guard, exterior polyester-coated in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote! * We are an official Müller Mitteltal dealer! * Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value). * Request your quotation now! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, appointments can be arranged as needed * We speak German, English, Russian, Polish and French ---- Iijdpsy Rb Tysfx Ab Tjb

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, toplam genişlik: 25.000 mm, toplam yükseklik: 40.000 mm, Üretim yılı: 2014, Donanım: ABS, Araç ile ilgili talepleriniz için Seidel Bey size memnuniyetle yardımcı olacaktır (telefon numarası isteğe bağlı). MÜLLER MITTELTAL SF32BM/BT Beton Mikser Yarı Römork Üst yapı: Liebherr HTM 1004 10m³, BPW akslar, tambur frenler, yaylı akümülatör, Wabco ABS, 1. aks kaldırılabilir, havalı süspansiyon, izin verilen toplam ağırlık: 32.000 kg, boş ağırlık: 6.510 kg, taşıma kapasitesi: 25.490 kg, lastik dişi: 1. aks 14-15 mm, 2. aks 10 mm Talebiniz halinde size leasing veya finansman teklifi sunabiliriz. Seidel Bey size memnuniyetle yardımcı olur (telefon numarası isteğe bağlı). Daha fazla bilgiyi internet sitemizde bulabilirsiniz. Ijdpfx Aboyfu Sde Teib ... Hatalar, değişiklikler ve ara satışlar saklıdır!!! = Ek Bilgiler = Azami yüklü ağırlık: 32.000 kg Daha fazla bilgi için Tobias Ebert ile iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pin for variable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable by mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underrun protection, usable as advertising surface * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum support structure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the support arm ends, as well as central claw-locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP engine with gear pump (150 bar) Iijdpfx Abou I Iqxj Tsb * Surface: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plate and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height adjustable in mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel fenders with splash protection * Enclosed side underrun protection, also suitable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum assembly, interior width between drum arms 1,700 mm – with tension lock for drum securing at the ends of the support arms and central claw lock for securing the cable drum assembly to the chassis Iiodpfx Aou I Iqleb Teb * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter with centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsionally stiff square tubing and cross-members Ijdpfxju I Iqro Ab Tsib * Enclosed steel mudguards with splash protection * Enclosed side underride guard, can be used as an advertising space * Plastic toolbox with floor liner (laying installation) approx. 500 x 350 x 400 mm * Swiveling cable drum construction, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrying arm ends as well as a central claw lock for connecting the cable drum frame to the chassis * Motor hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power unit with Loncin petrol engine, includes manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: Iiodpeu I Iq Eefx Ab Tob * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends * 1 Pair of Stepped Polyamide Centering Cones * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members Iiodpju I Iqfjfx Ab Teb * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader? Drive-Over Flatbed Trailer Enquiry Reference: 11630. Vehicle available immediately from Alsdorf stock ?BRAND NEW VEHICLE incl. COC * Gross weight: 21 t, payload: 16.50 t, galvanized chassis * Flatbed design with 400 mm high front wall, ramp locking via ramp support bars and diagonal bracing * 21 t gross weight version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unladen * 7 m loading platform with 400 mm high front wall * Extended ramps: 3 m single-piece, hot-dip galvanized steel ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop-forged lashing shackles (LC 8,000 daN) fitted to the existing hole pattern in the 45° outer frame; positioned approx. 1 m from front/rear cross member * 10 UVV lashing shackles LC 3,000 daN, retractable into the existing hole matrix in the outer frame * 2 UVV lashing rings each at front + rear, recessed in the cross member, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear end cross members * Device for retrofitting container locks (container locks available and possible at extra cost) * 50 mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * Plastic toolbox in front of the bulkhead on the right, in the direction of travel * LED lighting system * 7-pin socket at rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Side marker lights with flashing function * Warning panel for oversize loads * 1 removable round LED beacon incl. bracket and installation * Rear folding supports, front support leg with geared crank * ---- Lease-purchase example from our partner MMV Leasing: ¤ 665/month net, 60 months term, no down payment and "0" Euro final value Other terms with/without down payment/residual value possible! We are an official MüllerMitteltal dealer ----* Opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * WhatsApp Iisdpfoyvxg Uox Ab Teb

Koşul: ikinci el, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Üst platform uzunluğu yaklaşık 2900 mm! Iisdpfx Aeywvhreb Tob Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır!

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronisches Bremssystem) * Notlöseeinrichtung für Federspeicherzylinder * Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich * Trommelbremsen * 4 x 11 t Gigant-Achsen * Luftfederung mit manueller Absenkung hinten * Warnzeichenpaket vorne & hinten * SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert * Reflektierendes Konturband seitlich und hinten * Abnehmbare LED-Rundumleuchte hinten * 15-poliger Stromstecker * LED-Schlussleuchten * Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung * Geschlossene Kunststoff-Einzelkotflügel vorne * Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung) * Seitlicher Unterfahrschutz * Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln * Fahrgestell aus hochfestem Feinkornstahl * Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz * Auffahrrampen: äußere Bohlen aus 50 mm Hartholz * Ladungssicherungspaket (Lasi-Paket): - 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform - Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen - Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen - An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück - Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t) * 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge) * Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert * Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm) * Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand * Mechanische Fallstützen hinten * Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm) * Hydraulischer Rampenverschub seitlich * Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm * Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge) * Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt * Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert * Bereifung: 235/75R17.5 * Fahrzeug ist feuerverzinkt * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Sofort verfügbar ab Egestorf Iiodpfexmpydsx Ab Tob

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Closed individual plastic mudguards at the front * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear) * Chassis made of high-strength fine-grained steel * Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm hardwood * Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough * 11 pairs folding extensions for 3 m overall width (not on rear slope) * Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle * Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp displacement * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf Iisdpjxmpykofx Ab Tsb

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized Isdpfxox Ipa Ns Ab Tsib * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized Ijdpfx Asx Ipavjb Tsib * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed Iodpfol Tik Nsx Ab Tjib * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard on-board system for load weight determination * Warning panel packages at front & rear * Reflective contour marking tape on sides and rear * Removable rear rotating beacon Iedpel Tphrofx Ab Tjib * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side * Front: closed single fender in plastic * Rear: straight steel mudguards with spray suppression (spray mist reduction) * Side underrun protection * Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable * Chassis made of high-strength fine-grained steel * Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (no stakes present), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform * At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings at the excavator arm rest * 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope) * Widening planks for the left side stored in a compartment * Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm * Mechanical rear supports * Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, includes manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, A7

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakılmış tandem platform dorse ZANDT Cargo * TAT B 110 * Platform Isdpfjymuz Ujx Ab Teib * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!