Kullanılmış Müller-Mitteltal 14,4 To. Plateau, Luft, 3 M. Cont.- Verriegelung satın al (62.365)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Stuhr
2.555 km
Açık dorseli römork
MÜLLER-MITTELTALGR-TA 18 Pritsche*Container*TwistLock*Kamera*TOP
Ara
Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi
? Alçak bağlantı
? 50 mm çeki halkası
? Konteyner kilitleme
? Her iki tarafta 12 sabitleme halkası
? Geri görüş kamerası
? Kampana fren
? Duomatic bağlantı
? ABS
? Havalı süspansiyon
? Takım sandığı
? EBS
? Destek ayakları
Duedpfoxb Igljx Afvsu
? İkiz tekerlekler
? BPW akslar
Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.
Küçük ilan
Dabrowa k/Opola
1.891 km
Mikser
Müller-MitteltalLIEBHERR NACZEPA BETONOMIESZARKA 10m3
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton
Boş ağırlık: 6.530 kg
Dodex Utq Sepfx Afveuu
Yük kapasitesi: 25.470 kg
Azami toplam ağırlık (zGG): 32.000 kg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tieflader mit ABS
Ara
Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: !
Dusdpfx Afjzcmtzovsu
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalTA-2 14,4 t Tandemkipper- Tieflader Breitbereifung NEUWERTIG
Ara
Durum: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: !
Dodpszb Ntbjfx Afvsuu
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller Mitteltalka-ta-r 14,4 14,4 t Tandemkipper- Tieflader, Breitbereift
Ara
Durum: ikinci el, boş ağırlık: 3.550 kg, azami yük ağırlığı: 10.850 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 150J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 150J, arka lastik boyutu: 385/55R19,5 150J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, geniş lastik donanımı, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla bilgi için: !, Detaylar: !
Dedpfjzatxlox Afveuu
Küçük ilan
Bovenden
2.411 km
Alçak şasi römork
Müller-MitteltalT 3 Profi 30,0, hydr. Rampen
Ara
Durum: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevkiyat halinde, 3 aks, döner tabla, yaprak süspansiyon, ABS (kilitlenmeyi önleyici fren sistemi), bağlama halkaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, ikiz lastikler.
Üst yapı: Hidrolik çıkış rampalı, galvanizli rampalara sahip 3 akslı alçak şase treyler, 3x 10 tonluk akslar!
Djdpfoy R Ekisx Afveuu
Tüm bilgiler, aracın sevkiyat halinde olması nedeniyle teyitsizdir! Aksesuar bilgileri kesin değildir, değişiklik, ara satış ve hatalar saklıdır!
Küçük ilan
Bovenden
2.411 km
Alçak şasi römork
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Ara
Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box.
Duedeqpgtmspfx Afvsu
Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Brakes:
Dsdpfol Thy Rsx Afvsuu
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Towing Eye:
* Drawbar with 300 mm adjustable height
* 40 mm flanged towing eye
----General Attachments:
* Jost mechanical landing gear at front
* Externally mounted, hot-dip galvanized folding supports at rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted externally on the front wall
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks mounted at front and rear
* Bolted smooth sheet steel front wall
* Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist
* Hot-dip galvanized, bolted rear stanchions
----Load Securing:
* Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side)
* One 6.3 t lashing ring in each of the four corners front and rear
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Rear access, storage compartment below loading platform integrated into the chassis
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall
* Dropside colour in RAL 9010 pure white
* Painting of sidewalls in an RAL colour at additional cost possible
----Information:
* New vehicle, unregistered
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
Dodpfspk D D Ujx Afvjuu
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar adjustable in height by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted exterior on bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks, mounted at front and rear
* Bolted smooth sheet steel bulkhead
Dusdpfxel Tilxj Afveu
* Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters
* Bolted, hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side)
* 1 x 6.3 t lashing ring at each front and rear corner
* Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis
----Paint / Finish:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Drop side color RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
----Information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
Dusdpfx Aopk D Dmsfvou
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrical / Lighting:
* Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side)
* 15-pin electrical connector
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
Dusdpfxox Nli Nj Afveu
----General Fittings:
* Aluminium air tank
* Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm
* Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side
* 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery)
* 30 mm phenolic plywood floor
----Cable Drum Mounts:
* 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and drum width max. 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per mount: 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for drum shaft securing
* Steel drum shaft, 76 mm diameter with centering and rotatable ends
* 2 spacer rings
* 2 polyamide centering cones
* 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in a black tone
----Info:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Ara
Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Dodpfx Aoykx Nkofvjuu
----Axles:
* 3 x 11-ton BPW axles
* Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required)
* The last axle as a self-steering trailing axle with electro-pneumatic steering lock
* Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required)
----Suspension:
* Air suspension with lift and lower function as well as Ride height control valve
----Electrical / Lighting:
* Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12/24 V
* Removable LED rotating beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for extended length lighting
* Side marker lights with indicator function
* Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Landing gears at the front and swiveling supports at the rear of the chassis
* Straight sheet steel mudguards
* Spare wheel holder in front of the bulkhead cross member (without spare wheel)
* Mechanically adjustable warning sign packages at the front and rear
* Swivel arm as carrier for connection lines from truck to trailer
----Low Loader Platform:
* 2nd kingpin position
* Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid
* 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform
* Rear wall —150 mm— plugged in high
* Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps
* Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards
* Checker plate over the axles
* 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform
* Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses
* Preparation for container locks on the gooseneck
----Load Securing (LaSi Package):
Fifth Wheel Platform:
* Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm)
* 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam)
Low Loader Platform:
* 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope)
* 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle)
* 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess)
----Excavator Arm Rest:
* Extended excavator arm rest from end of last
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* LED lighting
* 15-pin plug connector
----General Attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolt-on underrun protection
* Quarter mudguards made of plastic
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanized fold-down supports
----Tipper Body:
* Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls, drop-down without central stanchion, with drop-side spring assist
* Tailgate, drop-down and swinging with manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear guide rail for drive-on ramps
----Load Securing:
* 1 x 5 t recessed, folding lashing ring in each corner
Duodsv Dz N Aspfx Afvju
* 4 x 3 t recessed and folding lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, recessed into the chassis from the rear
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted in black tone
* Drop-side paintwork in RAL 9010 pure white
* Paint finish for side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate in accordance with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Galvanized sheet steel toolbox, right side-mounted
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing leg at the front
* Rear: 2 mechanical, hot-dip galvanized folding supports
----Tipper Body:
* Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous, drop-side panels without central stanchion, folding with drop-side assist spring
* Rear tailgate can be folded down or swung with manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp mounting rail
----Load Securing:
* Each corner with 1 x 5 t recessed and foldable lashing ring
* Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, integrated into the chassis at the rear
----Tyres:
* Tyres: 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Side panels painted in RAL 9010 pure white
Dujdpfx Ajq Hg Dxjfvou
* Painting of the side panels in an RAL color of your choice available at extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
Dusdpfx Asxf Skpsfveu
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
Dusdpsq Euagefx Afveu
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
Djdpfxel Thw Ij Afvjuu
* Available from approx. week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
Djdpfx Afexf Skvevouu
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brake is disengaged)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side
* Closed plastic mudguards, front & rear axle
* Closed side underrun protection
* Rear underrun guard bolted
* Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear impact protection buffers
----Electrics / lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container guidance surface / tipping frame:
* External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment
* To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock
* The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside
* Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded from the front; hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Underrun protection and locking components (without top coat)
* Turntable, air reservoir, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* Suitable for container transport according to DIN 30722 Part 1
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
* Sample images (actual vehicle photos may vary due to optional equipment)
----Delivery time:
Dusdpfox Ipa Asx Afvju
* Available from CW 24/2026
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
Dujdpfx Afjx Nlkaoveu
----Electrics / Lighting:
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Ara
Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required)
* Rear axle as self-steering axle with electro-pneumatic steering lock
* Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required)
Duedoykx Nqjpfx Afvsu
----Suspension:
* Air suspension with lift and lower function and RTR valve
----Electrics / Lighting:
* Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for length extension lighting
* Side marker lamps with indicator function
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Support winds at the front and swiveling supports at the rear on the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall crossmember (without spare wheel)
* Mechanically adjustable warning sign packages front and rear
* Swivel arm as a carrier for connection cables from the truck to the semi-trailer
----Lowbed Deck:
* 2nd kingpin position
* Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable
* Rear wall insertable, 150 mm high
* Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps
* Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks
* Tear plate over the axles
* 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area)
* Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers
* Preparation for container locks on the swan neck
----Load securing (LaSi package):
Fifth wheel platform:
* Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm)
* 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam)
Lowbed platform:
* 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope)
* 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles)
* 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well)
----Excavator boom support:
* Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Ara
Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function
----Brake system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brakes are uncoupled)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side
* Enclosed plastic mudguards, front and rear axles
* Enclosed side underrun protection
* Rear bolted underrun protection
* Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear bumper pads
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* 15-pin 24V power plug
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container deck / tipping bridge:
* External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance
* To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement
* Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation)
* Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded/pushed from the front
* Hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Rear underrun protection and locking components (without top coat)
* Turntable, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
Dujdpfxjx Ipbms Afvou
----Information:
* For container transports according to DIN 30722 part 1
* New vehicle without initial registration with manufacturer’s warranty
* Errors and prior sale excepted
* Sample pictures (photos may vary from actual vehicle due to special features)
----Delivery time:
* Available from calendar week 24/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL1-achs 9,6 to. kipper mit ALU Bordwänden
Ara
Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6
----Braking system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* SAF axle
----Suspension:
* Parabolic springs
----Drawbar / Flange Eye:
* Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye
* Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar
----Coupling height:
* Standard coupling height approx. 900 mm (+/- 150 mm)
----Electrics / Lighting:
Dodpfsw Ndr Usx Afvouu
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED tail lights
* Flashing side marker lights
----General attachments:
* Support windlass at the front
* Enclosed plastic mudguards
* Folding underride guard for paver applications
----Chassis:
* Chassis made of fine-grain steel
----Tipper body:
* Pal.- 3-way tipper body
* 700 mm steel front wall
* Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking
* 800 mm high steel rear wall with automatic rear wall opening during rear tipping
* 4 mm Hardox 450 steel floor
----Load securing:
* On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor
----Paintwork:
* Chassis, drawbar, underride guard hot-dip galvanized
* Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 42/2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
* 3-in-1 – suitable for hooklift, skip containers, and as a low-loader
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
Dsdpfx Afewb Rakovjuu
* 2 x 10.5-ton axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required)
* LED tail lights 12/24 V
* 15-pin electrical connector
----General Attachments:
* Tool box made of powder-coated steel plate
* Spare wheel carrier in basket design on right-hand side
* Enclosed side underrun protection
* Quarter mudguards with splash guards made of plastic
* Plastic rear impact protection buffers
* Folding A-board at rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel plate floor with roller recesses in the bogie area
* Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm
* Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails
* Transport of up to 2 skip containers with max. 10 m³ possible
* Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable.
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop-down supports
----Load Securing:
* 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets
* 1 pair of 13.4-ton UVV lashing rings facing towards the front
* Four 8-ton lashing eyes per side integrated into the outer frame
----Ramps:
* Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Painting:
* Reflective contour tape, sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Information:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egstorf
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 14,4 to. plateau, luft, 3 m. cont.- verriegelung"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.















































































































































































































































































































































































































































