Kullanılmış Ls J27 Hst Mit Winterdienstausrüstung satın al (9.615)

Durum: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing Cedpfx Ahoyxh Rzs Esrd

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Drawbar adjustable in height by approx. 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * JOST mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking locations and 2 on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Steel pallet 3-way tipper body with continuous side walls reinforced on top with inner tubing – without central stanchions, foldable with drop side spring assist Crjdpfxol Th Hts Ah Eod * Removable bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be pivoted and locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with the wing doors open * 4 mm steel floor plate made of fine-grain steel * Mounting rail at rear for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner and 4 x 3 t recessed lashing eyes per side in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps integrated underneath cargo area in the chassis, accessible from the rear ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports galvanised * Axles, springs, air tank and landing gear painted in a shade of black * Sideboards painted RAL 9010 pure white * Other RAL colours for the sidewalls available at additional cost ----Information: * Reinforced body with load securing certificate * Vehicle has a one-day registration (not in use) * Subject to prior sale and errors excepted ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit Csdpjl Th Duofx Ah Eord ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right front side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking latches and 2 hooks on the front wall ----Chassis: * Chassis made from fine grain steel ----Tipping Platform: * Steel pallet tri-side tipper body with continuous side walls and internal tube reinforcement—without central stanchions, folding with drop side spring assist * Rear stanchions bolted * Combination steel swing doors at the rear, asymmetric 2-leaf design—swivels and lockable up to 270°, not foldable—with additional pendulum frame for automatic rear door opening during tipping, locking via galvanized rotary bolt lock and central locking, deactivation function for automatic rear door when tipping backwards with swing door open * 4 mm fine-grain steel floor plate * Rear ramp holder rails ----Load Securing: * One 5 t lash ring in each corner, plus four 3 t lashing eyes per side recessed in the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the platform at the rear of the chassis for the ramps ----Tyres: * Tyres: 285/70 R19.5 ----Coating: * Chassis, drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing leg painted in a black shade * Sideboard coating in RAL 9010 pure white * Side wall coating in other RAL colors available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to prior sale and errors excepted ----Delivery Time: Immediately available ex Egestorf

Üretim yılı: 2014, durum: ikinci el, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). stabau Roller Rails S1-RGSCH 100 / 4 t load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Cedjy Nv Enjpfx Ah Ejrd Price per pair: €2,390.00 net / €2,844.10 gross Load capacity: 4,000 kg Load centre: 1,500 mm Own weight: 689 kg (complete set) Total length: 3,000 mm Total width: 450 mm For exact fork pocket dimensions, please refer to the attached images. We stock a wide range of various attachments, all available immediately from our warehouse! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are official sales and service partners for: - Magni telehandlers - Holp attachments - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete Magni product range! Errors and prior sale excepted. Internal ID: 141072 = Further information = Unladen weight: 689 kg Suitable for: loading and unloading machines Please contact Marius Herden for further information.

Üretim yılı: 2016, durum: ikinci el, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). stabau roller tracks S1-RGSCH 100 / 4 t load capacity / year of manufacture: 2016 / in stock & available immediately / excellent condition Price per pair: €2,390.00 net / €2,844.10 gross Load capacity: 4,000 kg Load centre: 1,500 mm Dead weight: 710 kg (complete set) Total length: 3,000 mm Total width: 500 mm For exact pocket dimensions, please refer to the attached images. We have a very large selection of various attachments in stock and available immediately! Mr. Herden (phone) will be happy to assist you. Codpfx Ahoy Ikz Ie Ejrd We are also happy to provide you with a financing offer upon request. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for Holp. We are the official sales and service partner for Gierking GMT. We are the official sales and service partner for OilQuick. We are the official sales and service partner for Weber MT. We are the official sales and service partner for Westtech. We are the official sales and service partner for DMS. We are the official sales and service partner for Seppi M. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. Furthermore, with 800 used vehicles, we are among the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! Internal ID: 160520 = Further information = New: No Suitable for use with: Loading and unloading machines Please contact Marius Herden for further information.

Durum: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible Total technically permissible weight: 24,000 kg / 30,000 kg Payload approx.: 17,400 kg / 23,400 kg Unladen weight approx.: 6,600 kg +/- build tolerance Dimensions approx.: Total length: 10,900 mm Total width: 2,550 mm Neck length: 2,180 mm Low bed platform length incl. rear bevel: 6,500 mm Rear bevel length: 950 mm Chassis width: 2,520 mm Loading height in loaded low bed: 860 mm Drawbar height: 900 mm Drawbar length: 1,900 mm Features: - Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box integrated in transition slope to gooseneck - 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d) - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined - Ramps with spring-assisted lifting - Frame hot-dip galvanized Subject to errors and modifications. Codox Nrp Njpfx Ah Eerd

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings Codpfx Asl Sl Izoh Esrd 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm Codpfx Ahsxnnk Do Ejrd - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg Crsdpfjh Hm Thsx Ah Ejd - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar Csdpfx Ahsl Uxdks Esrd 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin Crsdpfx Aohlz R Soh Esd - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips Crsdpfek Af Svox Ah Eed - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: yeni, azami yük ağırlığı: 550 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.020 mm, yükleme alanı genişliği: 1.080 mm, yükleme alanı yüksekliği: 725 mm, TPV KT-EU2 Box Trailer Exterior color: silver grey (lid powder-coated black) Permissible total weight: 750 kg Payload: 550 kg Internal box dimensions: 202 x 108 x 72.5 cm (LxWxH) Comprehensively equipped box trailer with lid from Böckmann subsidiary TPV. Ideal for use behind a motorhome, panel van, or simply as a safe transport solution for DIY enthusiasts. * includes 2x rear supports * includes railing * lockable lid with black powder coating * side walls made of galvanized steel sheet * tailgate can be swung open and removed * robust latches * base plate made from multiplex phenolic plywood, slip-resistant * V-drawbar * unbraked Crjdpfx Ahex T R A Ne Ejd * maintenance-free rubber suspension axle * plastic mudguards * 12V connection with 7-pin plug * 4 lashing eyes within the loading area * jockey wheel * Price includes registration documents Exterior color available in black, white, or red painted finish for 400,- euros incl. VAT. Sales, consultations, and collection in Zell by appointment. Please note that due to the current shortage of materials at suppliers, trailer, accessory, and component prices may vary due to surcharges for increased material costs. Subject to prior sale and errors. Please inquire about availability and final prices. Continuous large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer, immediately or quickly available. Also available to order online. For self-transport, we can provide a temporary license plate for 20,- euros. Delivery within Germany available for an additional charge!

Durum: yeni, azami yük ağırlığı: 550 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.020 mm, yükleme alanı genişliği: 1.080 mm, yükleme alanı yüksekliği: 725 mm, TPV KT-EU2 Box Trailer Exterior color: silver-grey (lid black powder-coated) Permissible gross weight: 750 kg Payload: 550 kg Internal dimensions: 202 x 108 x 72.5 cm (LxWxH) Extensively equipped box trailer with lid from TPV, a subsidiary of Böckmann. Ideal for use with motorhomes and panel vans, or simply for secure transport for DIYers. * incl. 2x rear support legs * incl. railing * lockable lid with black powder coating * side walls made from galvanized sheet steel * tailgate swivel-mounted and removable * robust latches * anti-slip multiple-glued phenolic plywood floor * V-drawbar * unbraked * maintenance-free rubber suspension axle * plastic mudguards * 12V connection with 7-pin plug * 4 lashing eyes inside the loading area * jockey wheel Codsx T R Rgjpfx Ah Eord * Price includes vehicle documents Exterior color black, white, or red available for 400 EUR incl. VAT. Sales, advice, and collection in Zell by appointment. Please note: Due to the current material shortages at suppliers, the quoted prices for trailers, accessories, and components may vary due to surcharges for increased material costs. Subject to prior sale and errors excepted. Please inquire about availability and final prices. A wide selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available for online order. For home transport, we are happy to provide a transit license plate for EUR 20. Delivery within Germany available for an additional charge!

Durum: ikinci el, kilometre: 613.049 km, güç: 368 kW (500,34 bg), ilk tescil: 01/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.600 mm, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, koltuk sayısı: 2, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, navigasyon sistemi, park ısıtıcısı, Permissible total weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, air suspension front and rear, intarder, height-adjustable fifth wheel, electronic braking system (EBS), electronic stability program (ESP), air-suspended driver's seat, driver's/co-driver's armrest, level control, MAN Media Truck Advanced, outside temperature display, fog lights, electric exterior mirrors, wide-angle mirror, central locking, sun visor, aero kit, refrigerator, lifting roof, rubber flooring, speed limiter, emergency brake assist, storage box. Csdpfx Aewf Srcsh Eord

Durum: ikinci el, kilometre: 468.568 km, güç: 368 kW (500,34 bg), ilk tescil: 01/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.600 mm, renk: beyaz, şoför kabini: yataklı kabin, vites türü: mekanik, emisyon sınıfı: Euro 6, süspansiyon: hava, koltuk sayısı: 2, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, navigasyon sistemi, park ısıtıcısı, Permissible gross weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, air suspension (front and rear), retarder, height-adjustable fifth wheel coupling, Electronic Braking System (EBS), Electronic Stability Program (ESP), air-suspended driver's seat, driver and passenger armrest, ride height control, MAN Media Truck Advanced, outside temperature display, fog lights, electrically adjustable exterior mirrors, wide-angle mirror, central locking, sun visor, aero package, refrigerator, roof hatch, rubber flooring, speed limiter, emergency brake assist, storage box. Csdowf Sq Sspfx Ah Eerd

Durum: yeni, güç: 397 kW (539,77 bg), yakıt türü: dizel, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, renk: beyaz, vites türü: otomatik, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, vinç, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt of the equipment. Full equipment details on request. * 490 l fuel tank capacity, right side * 60 l AdBlue tank capacity, left side * Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * Emergency braking assist * Retarder Eco, speed-dependent, multi-stage, energy-efficient * Disc brakes on front axle * Disc brakes on rear axle * Disc brakes on 2nd rear axle * MAN D2676 LFBI diesel engine, 397 kW (540 hp) output, 2,650 Nm torque, Euro 6e * MAN TipMatic 12.28 OD with Retarder 35 * Transmission for increased pushing power during operation * MAN TipMatic operation with steering column lever, manual (DNR selection, shift strategy selection) * MAN EfficientRoll transmission function * MAN Idle Speed Driving transmission function * MAN TipMatic Performance and Efficiency drive programs, up to 70,000 kg * Front axle tires: Continental 385/65R22.5 Conti ECO HS5 steer-axle TL * Rear axle tires: Continental 315/70R22.5 Conti ECO HD5 drive-axle TL * 2nd rear axle tires: Continental 315/70R22.5 Conti ECO HD5 drive-axle TL * Tire pressure monitoring system (TPM), with tire temperature display * Trailer tire pressure display 0P3B9 6x4 * Front axle, 10,000 kg, non-driven, offset, steered, non-liftable * Rear axle, 13,000 kg, HY axle with drive-through, straight, non-steered, non-liftable * 2nd rear axle, 13,000 kg, HY axle without drive-through, straight, non-steered, non-liftable * Digital axle load display (ALM) for air-suspended axles * Digital axle load display (ALM) for trailer/semitrailer * Parabolic leaf suspension on front axle, 4-leaf, steel * Air suspension on rear axle * Air suspension on 2nd rear axle * Air suspension control for trailer/semitrailer * GM cab: spacious (wide, long, medium height) * LED Plus package, front headlights, fog lights, cornering lights * Front headlights, LED * Daytime running lights, LED * Fog lights, LED * Cornering lights, LED * Side indicators, LED * Mirror package, exterior mirrors electrically adjustable, heated, front mirror, kerb mirrors both sides * Exterior mirrors, electrically adjustable with maneuvering aid, heated * Left kerb mirror, electrically adjustable, heated * Right kerb mirror, electrically adjustable, heated * Front mirror, manually adjustable * Premium driver's seat package, air-suspended, seat heating and ventilation * Comfort driver's seat, air-suspended, with lumbar support and shoulder adjustment * Driver's seat ventilation * Basic passenger seat package, unsuspended, longitudinal, backrest and height adjustable * Passenger seat, unsuspended, longitudinal, backrest and height adjustable * Electronically controlled steering system MAN ComfortSteering * Professional instrument cluster 12.3 inch * Digital tachograph with remote communication (according to DSRC), CONTINENTAL * Electric stationary air conditioning * Climatronic air conditioning * Auxiliary water heater, 4 kW * Electronic Stability Program (ESP) * Traction control system (ASR) * Adaptive cruise control ACC Stop & Go, distance regulated * Adjustable speed limiter (engine speed limitation) * ECO levels for speed control, basic setting * Emergency brake assist EBA, non-switchable * MAN EfficientCruise cruise control function with PredictiveDrive * Lane departure warning LDW, non-switchable Credpfjy Auftjx Ah Esd * Lane change assist LCS and turn assist * Attention assist MAN Driver Monitoring System * Preparation

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, 10 ft steel platform with forklift pockets Steel platforms are used in construction and infrastructure applications. A steel platform can be utilized within the construction industry. Platforms provide stable bases for buildings, bridges, or other structures. They are also used for transporting machinery, excavators, forklifts, cars, or other vehicles. Platforms are employed in the offshore industry as well as on drilling rigs. Crjdeyv A D Repfx Ah Esd External dimensions: Length: 2,991 mm Width: 2,438 mm Height: 160 mm All dimensions are subject to change. Values may vary. Collection: Globaltainer GmbH An der Autobahn 12 29690 Buchholz / Aller, Germany Nationwide delivery within Germany possible, unloading via truck with loading crane if required. For delivery inquiries, please contact us and we will provide you with a quote.

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating Codei Ai E Repfx Ah Esrd - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Crodpfxoywv Ixo Ah Ejd Optional: The trailer is available with aluminum approach ramps.

Durum: ikinci el, makine/araç numarası: W09SZM218A1KB3022, güç: 110 kW (149,56 bg), yakıt türü: dizel, renk: beyaz, Üretim yılı: 2010, çalışma saatleri: 16.000 h, Donanım: park ısıtıcısı, Type: Kamag Truck – Wiesel SZM21 Operating Hours 2nd Pump and Variable Displacement Motor: approx. 16,000 h Mileage (according to odometer): approx. 170,000 km Chassis Number: W09SZM218A1KB3022 Year of Manufacture/First Registration: 2010 Gross Vehicle Weight (GVW): 16,700 kg Width: 2,550 mm Height: 2,950 mm Underride Clearance: 5,900 mm Drive: Hydrostatic Engine: Mercedes-Benz OM 904 LA, 4-cylinder inline engine, 110 kW, diesel Fifth Wheel: fitted Trailer Coupling: fitted Cab: white Road Approval: no Max. Speed: up to 40 km/h Equipment: - Lighting + Air trailer coupling - Shunting coupling - Central lubrication system (vehicle) - Central lubrication system (fifth wheel) - Lighting and air for fifth wheel - Heated & electric side mirrors - Front mirror - Wide-angle mirror - Ramp panoramic mirror - Auxiliary heater - Electric window regulators - Rear window wiper - Roof hatch - 2 work lights - Rotating beacon (front) - Twin tires - Telescopic marker lights (front) - Reversing camera - Telescopic rear bumper - Staircase - Hydrostatic drive - Reinforced fifth wheel bearing Cjdpfewu T Ukox Ah Ejrd - Stair handrail - Steering gear The vehicle has been completely refurbished, including inspection, etc. Lease-purchase as well as vehicle rental available! For further extras, please refer to the technical data sheet in the photos. If you are looking to sell your used swap body mover, feel free to contact us. For further questions, do not hesitate to contact us at: Fötec GmbH – Fördertechnik Ringstraße 4 D-66459 Kirkel-Limbach

Durum: yeni, toplam ağırlık: 31.000 kg, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.300 mm, Üretim yılı: 2025, Donanım: ABS, Makine ve forklift taşımaları için rampalı, özel üretim 2 dingilli eğimli yarı römork Mega versiyon, yaklaşık 960 mm beygir yüksekliği Maksimum iç yükseklik için konik yapı Ölçüler: Uzunluk: 13.600 mm Genişlik: 2.480 mm Yükseklik arkadan öne doğru konik, yaklaşık 3.300 mm'den 2.800 mm'ye Teker kovası, dolgu parçaları dahil VSE Smart Steering yönlendirici dingil (ileriye ve geriye yönlendirme) Crodpfox Hb Ntsx Ah Eed Aşırı aks yükleri için alüminyum zemin, kaymaz kaplama dahil Dışta Alcoa DB alüminyum jantlar Kayar perdeli üst yapı, kaldırılabilir tavan RSAB IceProtect Arka taraf genişletilebilir Aşırı genişlik tabelaları Minimum tırmanma açısı için uzatılabilir arka rampa, açı azaltıcı dahil Elektro-hidrolik tahrik sistemi Kapsamlı yük güvenliği Talep üzerine, uyumlu 3 dingilli çekici aracı satış veya kiralama için temin ediyoruz. Daha fazla bilgi talep üzerine verilir.

Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Credpfx Ahsziyizs Esd

Durum: ikinci el, boş ağırlık: 8.850 kg, azami yük ağırlığı: 31.150 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2019, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme alanı toplam uzunluğu yaklaşık 9.500 mm, alçak şasi yükleme alanı uzunluğu yaklaşık 7.360 mm, yükseklik yaklaşık 910 mm, 14 çift sabitleme halkası. Araç müşteri talebi üzerine sunulmaktadır. -- Yazım hataları, yanlışlıklar ve değişiklikler olabilir, örnek görsellerdir. Daha fazla veri için: !, Detaylar için: ! Cjdpoziyinsfx Ah Eord

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Cjdpfxezhr Exs Ah Ejrd