Kullanılmış Müller-Mitteltal 14,4 To. Tand. Cont. Absetzanh. -Feuerverzinkt- satın al (37.304)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALRA-T 18,0 Außenroller, feuerverzinkt, Neu
Ara
Durum: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* Tire pressure monitoring system (RDÜ)
* Emergency release device for spring-loaded cylinders
* Disc brakes
* 2 x 10 t BPW wide-track axles
* Air suspension (automatic lowering when brake is uncoupled)
* Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* Plastic tool box 450 x 470 mm, mounted on the right side
* Side-mounted storage box 1,000 x 500 x 500 mm
* Closed plastic mudguards, front and rear
* Closed lateral underride protection, usable as advertising surface
* Rear underrun protection
* Rear plastic bumper pads
* Rear hazardous goods placard
* 15-pin electrical connector
* LED rear lights
* Rollway length approx. 6,830 mm
* Pneumatic 4-point container lock
* Mechanically adjustable stop brackets (2 positions) front left and right on the tracks
* 265/70 R 19.5 twin tires
* Unladen weight 3,220 kg
Bjdpfx Aev Nulzjh Ejli
* --Permissible total weight up to 20,000 kg technically possible--
* Approx. 1,130 mm ride height when loaded
* Suitable for container lengths from 5,500 to 7,000 mm
* Hot-dip galvanized chassis
* Air tanks, axles, slewing ring, and drawbar
* New vehicle with manufacturer’s warranty
* Errors and prior sale reserved
* Available from approx. week 29 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to, Luft, Seitliche ALU Wände, Rollplane
Ara
Durum: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18
----Braking System:
Bljdsx Ipbyepfx Ah Eei
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 9 t Gigant axles
----Suspension:
* Air suspension with level control during tipping
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required-
* 15-pin power connector
* LED lighting with galvanized protective cover
* 2 LED reversing lights
----Drawbar / Towing Eye:
* Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate)
----General Attachments:
* Support winch at front
* Foldable galvanized steel underrun protection for paver feeding
* Closed single plastic mudguards
* Front wall platform made of grating with access step at drawbar and handrails on the front wall
----Chassis:
* Chassis made of high-tensile fine-grain steel
----Tipping Body:
* 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist
* Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor
----Tarpaulin:
* Rolling tarpaulin - agate grey similar to RAL 7038 -
* Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear
----Painting:
* Chassis, underrun protection, and drawbar hot-dip galvanized
* Axles, air tanks, support winch, and flange-type towing eye painted in a black tone
* Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t
* New vehicle without initial registration including manufacturer's warranty
* Subject to errors and prior sale
* Sample images (photos may differ due to optional equipment)
----Delivery time:
* Vehicle available from week 42/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
Bljdpoxf Skpjfx Ah Eji
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing aggregate
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights 12/24 V
* Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Jost mechanical landing gear front
* 2 mechanical folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks at the central locking positions as well as 2 on the front wall
* Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter)
* Rear stanchions bolted
* Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door
* 4 mm fine-grain steel floor plate
----Load Securing:
* Each corner with 1 x 5 t lashing point
Blsdpex Hm Rcefx Ah Eji
* 4 x 3 t recessed lashing rings per side on the outer frame
----Chassis:
* Chassis made from fine-grain steel
----Ramps:
* Rear mounting rail for access ramps
* 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear
----Tires:
* Tire size: 358/55 R 19.5
----Paintwork:
* Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in black
* Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion
----Information:
* Reinforced body with load securing certificate
* Subject to prior sale and errors
* Sample images
----Delivery Time:
* Available immediately from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange-type Drawbar Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED rear lights, 12/24 V
* Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks installed at the central locking bearings and 2 units on the bulkhead
* Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter)
* Rear stanchions bolted
* Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open
* 4 mm fine-grain steel floor plate
----Load Securing:
* 1 x 5 t lashing point at each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Chassis:
* Chassis constructed of fine-grain steel
----Ramps:
* Rear fitting track for loading ramps
* 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis
----Tyres:
* Tyres: 358/55 R 19.5
----Paintwork:
* Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized
* Axles, springs, air reservoir and landing leg painted in a black tone
Bledpfx Ahox Hm Rij Eji
* Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion
----Information:
* Reinforced superstructure with load securing certificate
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Ready for immediate delivery ex works from week 29/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
Blsdpfx Aexf Skvoh Eji
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL1-achs 9,6 to. kipper mit ALU Bordwänden
Ara
Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6
----Braking system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* SAF axle
----Suspension:
* Parabolic springs
----Drawbar / Flange Eye:
* Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye
* Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar
Blsdpfxow Ndr Us Ah Eoi
----Coupling height:
* Standard coupling height approx. 900 mm (+/- 150 mm)
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED tail lights
* Flashing side marker lights
----General attachments:
* Support windlass at the front
* Enclosed plastic mudguards
* Folding underride guard for paver applications
----Chassis:
* Chassis made of fine-grain steel
----Tipper body:
* Pal.- 3-way tipper body
* 700 mm steel front wall
* Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking
* 800 mm high steel rear wall with automatic rear wall opening during rear tipping
* 4 mm Hardox 450 steel floor
----Load securing:
* On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor
----Paintwork:
* Chassis, drawbar, underride guard hot-dip galvanized
* Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 42/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Ara
Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
Blodpfjykx I Hox Ah Eoi
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Ara
Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
Blodpoykx I Tefx Ah Eoi
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜTAR 14,4 Tieflader, LED, Runduml.
Ara
Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer
Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible.
* We are happy to provide a tailored offer.
* -----
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
Bodpfxozbfmqo Ah Esli
* 6.27 m x 2.47 m platform with galvanized 400 mm front wall
* Digger bucket rest made of hardwood bolted to the front wall
* Unladen deck height: 930 mm / Laden: 870 mm
* One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports
* Ramp lift with vertically mounted, adjustable springs for convenient single-operator use
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition
* Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams
* Toolbox mounted in front of the front wall
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear
* 2 container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request
* 1 removable LED beacon at the rear
-----
* Leasing, hire purchase, financing, trade-in available
* Example: €525 per month, 60-month term, no down payment, no final installment
-----
* Our opening hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
Outside of opening hours, appointments are possible by arrangement.
We speak German, English, Polish, French.
Leasing, financing, and trade-in available.
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Ara
Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0
----Brake System:
* EBS braking system
* Emergency release for spring-actuated brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* Parabolic springs with mechanical axle equalization at the rear
----Drawbar:
* Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* Multi-voltage system
* LED tail lights 12 / 24 V
* Removable beacon at the rear
* 15-pin power connector
----General Attachments:
* Side underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards
* Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm
* Folding lid (hot-dip galvanized) for the toolbox on the turntable platform
* Four stake pockets per side (stakes not included), each with integrated lashing option
----Load securing (La-Si package comprises):
* 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform
* 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame
* 13.4 t at the corners, otherwise 10 t
----Widening:
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer)
* Widening planks stored in the middle of the loading area
----Ramps:
* Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
Bedpfxsl Th Nno Ah Esli
* 4-way valve block for retrofitting hydraulic side ramp displacement
----Loading area:
* Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope)
----Tyres:
* 235/75 R 17.5 twin tyres
----Unladen weight:
* Approx. 5,980 kg unladen weight
----Paintwork:
* Chassis, turntable, drawbar and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
----Information:
* Permissible gross weight of 30,000 kg technically possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS/EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem balancing unit with 100 mm wide parabolic springs
Blsdpfer Dpzuex Ah Eji
----Drawbar / Draw Tube:
* Fixed welded draw tube with low-maintenance ball joint for K80 ball head coupling (adjustable +77 mm / 33 mm via front plate) with elevated tower for connection lines
----Electrics / Lighting:
* 12V 7+4 pin power supply
* LED lighting system 12/24V with protective grille
* 2 rear LED work lights switchable from the towing vehicle, no vehicle-side installation required
----General Attachments:
* Landing gear at the front
* Mechanical support legs at the rear
* Side marker lights with indicator activation
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Hot-dip galvanized two-step access ladder in front of the front wall (left side, FR)
----Chassis:
* Chassis made of high-tensile fine-grain steel
----Tipping Platform:
* Steel pallet 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls — without central posts — swinging via manual central locking and mechanically foldable with sideboard spring assisters)
* Hydraulic tailgate, 500 mm high, functions as hydraulic chute, with 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 recessed and folding 7 t lashing ring in each corner
* 4 recessed and folding 3 t lashing rings per side
----Ramps:
* 1 pair of aluminium access ramps (10 t/pair for axle distance over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles
* 2 storage compartments for aluminum loading ramps integrated at the rear of the chassis
* Load securing according to EN 12642 XL
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
----Paintwork:
* Superstructure painted in RAL 9010 pure white
* Chassis, draw tube, rear support legs, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear
* K80 coupling painted in black
----Notes:
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem equalizer unit with 100 mm wide parabolic springs
----Drawbar/Eyelet:
* Solidly welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via the mounting plate), with raised gallows for connection lines
----Electrics / Lighting:
* 12 V 7+4-pin power supply
* LED lighting system 12 / 24 V with protective grid
* 2 LED work lights at the rear, switchable from the towing vehicle without vehicle-side installation
----General Attachments:
* Landing gear at the front
* Mechanical drop-down supports at the rear
* Side marker lights with indicator control
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, positioned on the right
* Hot-dip galvanized, two-step access ladder in front of the front wall (left side)
----Chassis:
* Chassis made of fine-grain steel
----Tipping Platform:
* Steel pallet-wide three-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls – without center posts – swinging via manual central locking and mechanically foldable with drop side spring lifter
* Hydraulic tailgate, 500 mm high, serves as hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 x 7 t recessed and foldable lashing ring in each corner
* 4 x 3 t recessed and foldable lashing eyes on each side
----Ramps:
* 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 integrated rear ramp compartments in the chassis for aluminum loading ramps
* Load securing to EN 12642 XL standard
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
----Paintwork:
* Superstructure painted RAL 9010 pure white
* Chassis, drawbar, rear supports, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear, K80 coupling painted in black tone
Bodpor Dpz Hefx Ah Eoli
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL2-achs Cont.-Anh., Beladung von vorne und hinten
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, Üretim yılı: 2026, RA-T 18.0:
Loadable from front and rear
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 19.5" disc brakes
* Automatic braking when opening the cross-tension units
----Axles:
* 2 x 10 t BPW wide-track axles
----Suspension:
* Air suspension (automatic lowering when uncoupling brakes)
----Electrics / Lighting:
* Tire pressure monitoring system with display in truck via EBS signal (no installation required on truck side)
* 15-pin power connector
* LED lighting system with protective canopy
* 2 LED reversing lights (activated via reverse gear)
----Drawbar:
* Pneumatically lowerable drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General Attachments:
* Plastic toolbox 858 x 500 x 500 mm, right side
* Storage box for container net made of galvanized perforated sheet, 1,000 x 500 x 500 mm, on the side
* Enclosed plastic mudguards front & rear axle
* Enclosed side underrun protection (RAL 9010 pure white) suitable as advertising space
* Rear underrun protection
* Rear plastic bumpers
* Foldable A-sign
* Hazardous goods placard with document pocket and reflective rear parking warning sign
----Container Area:
* Additional front loading with rear runway lowering and removable stops
* Roller depressions in the turntable area with mechanically adjustable stop angles (2 positions) front left and right on the runways
* Roller track length approx. 6,830 mm
* Pneumatic 4-point clamp locking
* Suitable for transporting external roll containers according to DIN 30722 Part 1 - Dekra load securing certificate available -
----Loading Height:
* Loaded approx. 1,130 mm
----Paintwork:
* Chassis and locking parts hot-dip galvanized
Bljdpfx Ahjl Tn U Rs Eei
* Air reservoir, axles, turntable and drawbar painted in black
----Info:
* --Permissible gross weight technically up to 20,000 kg--
* New vehicle without first registration with manufacturer warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available approx. from week 21/2026
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 14,4 Breitreifen, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way tipper trailer with ramps
* NEW VEHICLE
* Now available immediately in RAL 9016 traffic white
* Leasing, financing, and trade-in of your old trailer possible
* Ref. No. for inquiries: 11654
* ABS with optional truck display via EBS signal
* Side marker lights with indicator function
* Gross weight: 14,400 kg, Payload: 11,050 kg
* EBS 2S/2M
* Galvanized floor 5m x 2.42m x 0.5m, laser-welded sideboards, swinging, folding, removable, pre-fitted for later sidewall extension kits
Bledpfxjyvxg Is Ah Eji
* Lockable compartment under the tipping bridge for loading ramps
* Includes 1 pair of aluminium loading ramps, 8t/pair, length: 3.57m
* Chassis hot-dip galvanized, front wall hot-dip galvanized
* 4 UVV tie-down rings LC 5000daN (front & rear) + 8 recessed and foldable lashing eyes LC 3000daN in the tipping floor (centrally aligned)
* Hardwood excavator bucket rest
* Two-step access in front of the front wall (hot-dip galvanized)
* Continuously height-adjustable, hot-dip galvanized drawbar, 40 mm towing eye
* Wide tyres 385/55R 19.5 (4x), parabolic springs
* Net hooks, bolted rear stanchions, hot-dip galvanized
* Guide ropes for the rear drop side
* Plastic toolbox on the right-hand chassis frame
* LED lighting system 12 + 24 Volt
* 2 LED reversing lights at the rear of the trailer
* Lease-purchase price:
* e.g. €560 for 60 months, without down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available.
* Request an offer from us!
* We are Müller-Mitteltal authorized dealer
* Delivery to your site possible with timely order!
----Our opening hours
Monday – Thursday: 08:00 – 17:00
Friday: 08:00 – 15:00
Outside of business hours, we are available by appointment.
We speak German, English, Polish, French.
WhatsApp
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalKA-TA-R 13,5 13,5 t Tandemkipper- Tieflader Aufsatzbordwände Breitbereift
Ara
Durum: ikinci el, boş ağırlık: 3.750 kg, azami yük ağırlığı: 9.750 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2014, yükleme alanı uzunluğu: 5.040 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 148J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 148J, arka lastik boyutu: 385/55R19,5 148J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Üst yapı yan panelleri, geniş lastikler, sabitleme halkaları, rampalar için ek ücret 900 € net, -- baskı hataları, değişiklik ve hatalar saklıdır, resimler örnektir --, Daha fazla veri için: !, Daha fazla ayrıntı: !
Blodpfxjzhr Hpo Ah Eoi
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalETUE-TA 18,0 18 t GG Tandemtieflader
Ara
Durum: ikinci el, boş ağırlık: 4.550 kg, azami yük ağırlığı: 13.450 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, yükleme alanı uzunluğu: 6.540 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: beż, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to typing errors, mistakes and changes, sample images --, More data at: !, More Details: !
Bedpfx Ahozhr Erj Ejli
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalKA-TA-RT 18,0 18 t Tandemkipper- Tieflader
Ara
Durum: ikinci el, boş ağırlık: 4.190 kg, azami yük ağırlığı: 13.810 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2016, süspansiyon: hava, lastik boyutu: 385/55R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R22,5 160J, arka lastik boyutu: 385/55R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, 800 mm alüminyum yan duvarlar, rampalar için ek ücret 800 €, -- yazım hataları, değişiklik ve yanlışlık yapma hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !
Blodpfx Ahszhk Ekj Eei
Küçük ilan
Regensburg
2.150 km
Yarı römork
MÜLLER-MITTELTALLIEBHERR HTM 1004 10 m³ BETONAUFLIEGER Nr.: 007
Ara
Durum: ikinci el, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2009, toplam genişlik: 2.550 mm, toplam yükseklik: 3.900 mm, Donanım: ABS, Araç Tanıtım No.: WMM00090053007
Hidrolik tahrikli
Boş ağırlık: 7.500 kg
Alman muayenesi (DE HU) geçerlilik süresi dolmuş
---- LIEBHERR TİP HTM 1004 – Hacim 10 m³
Su: 620 l.
BPW Eco Plus akslar, kampanalı frenler
Stetter-Smart-Control
KALDIRMA AKSI
Lastikler: 445/65 R 22,5
Bodpozirhvsfx Ah Esli
Değişiklik, arada satış ve hatalar açıkça saklıdır. Açıklama, aracın genel tanımlanması içindir ve hukuki satış garantisi oluşturmaz. Satış sözleşmesindeki açıklama esas alınır.
Teklifimiz prensip olarak yeni TÜV muayenesi olmadan sunulmaktadır. Yeni TÜV muayenesi istenirse, partner servislerimizin teklifi ile yardımcı olabiliriz! Araç reklam ve/veya yazı ile kaplanmış olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.
Küçük ilan
Schwebheim
2.317 km
Damperli treyler
Müller MitteltalKA-TA-T 13,5 t Tandemkipper- Tieflader
Ara
Durum: ikinci el, boş ağırlık: 3.320 kg, azami yük ağırlığı: 10.180 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2003, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.040 mm, süspansiyon: çelik, lastik boyutu: 285/70R19,5 148/145J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148/145J, arka lastik boyutu: 285/70R19,5 148/145J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, , Rampalar için ek ücret: 800 €, , -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !,
Bedpfxszgathe Ah Eoli
Küçük ilan
Dabrowa k/Opola
1.891 km
Makine taşıma römorku
Müller-MitteltalMULLER-MITTELTAL ETUE-TA-R 18.0 PRZYCZEPA TANDE...
Ara
Durum: ikinci el, renk: sarı, Üretim yılı: 2017, Donanım: ABS, Boş ağırlık: 4.320 kg
Yük kapasitesi: 13.680 kg
Azami toplam ağırlık: 18.000 kg
Bedpfxszdqnds Ah Esli
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: ikinci el, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2026, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18,0:
* 2'si 1 arada = Devrilebilir konteynerler ve alçak şasi olarak kullanılabilir
----Fren Sistemi:
* EBS elektronik fren sistemi
* Yay depo silindiri için acil çözme tertibatı
* Kampanalı frenler
----Akslar:
* 2 x 10 ton akslar
----Süspansiyon:
* Yükseltme ve alçaltma sistemi ile RTR valfli havalı süspansiyon
----Çeki kolu:
* Kıvrımlı çekme kolu, 2.000 mm uzunluğunda, 40 / 50 mm döner çekme halkalı (8° halkasız)
* Çeki kolu yayı yerine GHD yükseklik ayar mekanizması
----Elektrik / Aydınlatma:
* Lastik basınç izleme, gösterim imkanı kamyonda EBS sinyaliyle -kamyon tarafında montajsız-
* 12 / 24 V LED arka lambalar
* 15 pinli elektrik soketi
----Genel Donanımlar:
* Yaklaşık 1.000 x 300 x 600 mm boyutlarında pudra boyalı çelik sacdan yapılmış alet kutusu
* Sağ tarafta stepne tutucu
* Yanlarda ve arkada reflektif şeritler
* Yan çarpma koruması
* Sıçrama önleyicili plastik çeyrek çamurluklar
* Arkada plastik tampon koruma pufları
* Arkada katlanabilir A tabelası
----Yükleme Alanı:
* Roll konteynerlerin yönlendirilmesi için yükseltilmiş dış çerçeveli ana şasi
* Dönel şasi bölgesinde rollere uygun çelik sac taban
* 5.500 - 7.000 mm arasında konteyner uzunluğu mümkün
* DIN 30722-1’e göre yük emniyet sertifikalı, pnömatik 4 yönlü kilitleme ve ön kılavuzda mekanik takılabilir durdurma köşeleri
* Rampanın eğim kısmında kaymaz kaynak dikişi
* Arkada mekanik düşen destekler
Bodpfx Aezihcpsh Eeli
----Yük Emniyeti:
* Ön duvar traversinde 1 çift 10 ton UVV bağlama halkası
* Dış çerçevede yanlarda 3 çift 10 ton UVV bağlama halkası
* İki tarafta da dörder adet 2 ton yonca tipi bağlama noktaları
* Dış çerçeveye gömülü 4 x 8 ton bağlama köprüsü
----Rampalar:
* 1 çift alüminyum yükleme rampası (10,6 ton/çift), 2.800 x 470 mm, lastikli ve paletli araçlar için uygun (arkadan kilitlenebilir depolama bölmesi)
----Boya:
* Şasi, döner şasi, kilit mekanizmaları, arka destekler sıcak daldırma galvanizli
* Ancak çekme kolu, akslar ve hava tankı siyah tonlarında boyalı
----Bilgiler:
* Araç 03.2027’ye kadar tam üretici garantisine sahip
* Hatalar ve ara satışlar saklıdır
* Römork neredeyse yeni durumda olup en fazla 5 kez kullanılmıştır
----Teslimat Süresi:
* Hemen Egestorf, A7 çıkışında teslim edilebilir
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: ikinci el, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2026, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18,0:
* 2'si 1 arada = Devrilir konteyner şasisi ve alçak şasi treyler olarak kullanılabilir
----Fren sistemi:
* EBS elektronik fren sistemi
* Yay rezervli silindirler için acil açma cihazı
* Kampana frenler
----Akslar:
* 2 x 10 ton akslar
----Süspansiyon:
* Kaldırma/alçaltma sistemi ve RTR valfi ile havalı süspansiyon
----Çeki barı:
* 2.000 mm uzunluğunda eğimli çekici bar, 40/50 mm döner gözlü (8° gözsüz)
* Deichselfeder yerine GHD yükseklik ayarlama sistemi
----Elektrik / Aydınlatma:
* EBS sinyali üzerinden kamyonda gösterge imkanlı lastik basınç izleme -kamyon tarafında kurulum olmadan-
* LED arka lambalar 12 / 24 V
* 15 pin elektrik soketi
----Genel donatılar:
* Elektrostatik toz boyalı çelikten yapılmış yaklaşık 1.000 x 300 x 600 mm boyutunda alet kutusu
* Sağda stepne tutucu
* Yan ve arka reflektör bant
* Yan çarpma koruması
* Sıçramaya karşı plastik çeyrek çamurluklar
* Arka plastik tampon koruma takozları
* Katlanabilir arka A tabelası
----Yükleme alanı:
* Yönlendirmeli kenar raylı ana şasi
* Dönüş tablası bölgesinde hadde çelik taban, tekerlek çukurları ile
* Konteyner uzunluğu: 5.500 - 7.000 mm arası mümkündür
* Havalı 4 noktalı kelepçe kilitleme sistemi ve ön tarafta mekanik takmalı sınırlama köşebentleri, DIN 30722 - 1'e göre yük emniyet sertifikalı
* Eğik rampa alanında kaymaz kaynak dikişleri
* Arka mekanik katlanır destekler
----Yük emniyeti:
* Ön panel taşıyıcıda 1 çift 10 ton UVV yük bağlama halkası
* Yanlarda dış çerçevede 3 çift 10 ton UVV yük bağlama halkası
* Yanlarda dörder adet 2 ton "yonca tipi" yük halkası
* Dış çerçeveye gömülü 4 adet 8 ton yük halkası
----Rampalar:
* 1 çift alüminyum yanaştırma rampası (toplam 10,6 ton/çift), 2.800 x 470 mm, lastikli ve paletli araçlar için uygun (arkadan kilitlenebilir saklama bölmesi)
Bedpfozihcisx Ah Esli
----Boya:
* Şasi, döner tabla, kilitleme parçaları ve arka destekler galvanizli
*Çeki barı, akslar ve hava tankı siyah renkte boyalı
----Bilgi:
* Araç, 03/2027’ye kadar tam üretici garantilidir
* Hatalar ve ön satış hakkı saklıdır
* Römork, yeni gibi durumundadır, maksimum 5 kez kullanılmıştır
----Teslimat süresi:
* Egestorf/A7’den hemen teslim edilebilir
Küçük ilan
Regensburg
2.150 km
Alçak şasi römork
MÜLLER-MITTELTALPT 30,0 KOMPAKT GERADE FLÄCHE CONTAINER Nr.: 540
Ara
Durum: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540
STRAIGHT LOAD BED
Container Locking System
Unladen Weight: 8,000 kg
German Inspection (HU): Due
Gigant Axles with Drum Brakes
Air Suspension
Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4
Extendable to 3,000 mm with Lighting
Drawbar – 50 mm
Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm
Support System
Tyres: 235/75 R 17.5
Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract.
Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.
Blsdpfjtuhv Rjx Ah Eei
Küçük ilan
Landsberg am Lech
2.201 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R14,4 Kipper mit Alurampemnt
Ara
Durum: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse
- Seride taşıma kapasitesi yakl.: 11.050 kg
- 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir
- İç ölçüler: 5.000 x 2.420 x 500 mm
- Yüklü zemin yüksekliği 1.040 mm
- 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde
- Boya: Akslar, yaylar ve hava tankı vb. siyah renkte
- Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN
- ABS 2 S/2 M, 24 Volt
- 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı
- Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit
Opsiyonel donanımlar:
Bsdexmwiyopfx Ah Ejli
Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil
4 mm kalınlığında Hardox 450 çelik taban
Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı
1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun
Alet kutusu
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 14,4 to. tand. cont. absetzanh. -feuerverzinkt-"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
































































































































































































































































































































































































































