Kullanılmış Faymonville 3-A-Semi-Hydr. Ladebo.-Abklappbarem Heck satın al (65.315)

Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: Ppedpfx Ahotplwiohsu * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight Ppjdpfsl Th I Ajx Ahhsu ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: ikinci el, Üretim yılı: 2018, çalışma saatleri: 540 h, Paletli - Kayar Şasi - Cadde Yükleyici, ön kapı, hidrolik hızlı değiştirme sistemi, 3 kontrol devresi, geri görüş kamerası, yaklaşık 0,3 m³ yük kovası, palet çatalları, çalışma saati: 540, araç reklamla kaplanmış ve/veya yazılanmış olabilir. K2778 Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, iş ortaklarımız olan servislerden teklif sunabiliriz! Araç reklamla kaplanmış ve/veya yazılanmış olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Psdpfxey Ngtco Ahhjpu Bu makine için size bir finansman veya leasing teklifi de sunabiliriz. Lütfen bize ulaşın!

Durum: ikinci el, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1994, yükleme alanı uzunluğu: 13.030 mm, yükleme alanı genişliği: 2.600 mm, toplam genişlik: 2.600 mm, toplam yükseklik: 4.000 mm, Yük yatağı: 8.620 mm, arka eğim: 450 mm, genişlik: 2.600 mm, genişlik: 3.111 mm genişletildiğinde, uzatılabilir ve/veya katlanabilir genişletmeler, kuğu boynu: 3.960 mm, yük yatağı yüksekliği: yaklaşık 880 mm, hidrolik yana kaydırılabilir rampalar (UxG) 2.900x830 mm, elektrikli hidrolik pompa, kablolu uzaktan kumanda, her iki tarafta 2'şer ağır yük bağlama halkası, her iki tarafta 5'şer direk cebi, uzatılabilir uyarı levhaları, merkezi yağlama sistemi, destek ayakları, üç akslı hidrolik zorunlu yönlendirme, tambur fren sistemi, havalı süspansiyon, döner uyarı lambası, geri vites farı, araç reklam kaplamalı ve/veya yazılı olabilir. SI85616 Psdpfx Ajw Sb Sqshhopu Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu araç için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front & rear warning panel sets * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, height infinitely adjustable * Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right * Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression * Side underrun protection * 500 mm forward offset extension * Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood * Outer boards of loading ramps: 50 mm bamboo wood * Four stake pockets per side (no stakes included), each also providing a 2 t lashing option * Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope) * Extension planks for widening, stored left side in the storage compartment * Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from the ramp shaft * Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm * Loaded platform height: approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Ppodpfx Aorczm Dehhou * Immediately available ex Egestorf

Durum: ikinci el, makine/araç numarası: WKESD00000060xxxx, Üretim yılı: 2014, Lütfen talebinizde referans numarasını belirtiniz: 23349 Teknik Özellikler: Model: 2014 AB onayı geçerlilik tarihi: 30.06.2027 3 dingil 1. dingil kaldırılabilir 1. ve 2. dingil arası mesafe: 131 cm Taşıma kapasitesi: 34.480 kg Lastikler (resimlerde görülebilir) 2 sıcaklık bölgesi Soğutucu/dondurucu ünitesi Üstyapı uzunluğu: 13,414 m Üst yapı genişliği: 2,496 m Üst yapı yüksekliği: 2,744 m Teslimata hazır Açıklama: Satışta; iki sıcaklık bölgesine ve soğutucu/dondurucu ünitesine sahip 2014 model Krone Cool Liner 3 dingilli kasa dorse bulunmaktadır. Dorse sorunsuz çalışmaktadır ve haftalık olarak kullanılmaktadır. Kozmetik olarak bazı küçük hasarlar olabilir. Hemen teslim edilebilir. Km: 1 Muayene: Evet AB onaylıdır: 30.06.2027 Boş ağırlık: 9.020 kg Toplam ağırlık: 43.500 kg Taşıma kapasitesi: 34.480 kg Ppedpfoy Sfm Tex Ahhju Genişlik: 260 cm Uzunluk: 1.404 cm Model: Cool Liner 3 dingil, iki sıcaklık bölmeli dorse, soğutucu/dondurucu üniteli, AB onaylı 30.06.2027 tarihine kadar = Ek Bilgiler = Daha fazla bilgi için lütfen ATS Norway ile iletişime geçiniz.

Durum: iyi (kullanılmış), güç: 86 kW (116,93 bg), yakıt türü: dizel, renk: diğer, dingil konfigürasyonu: 4x4, ilk tescil: 06/2003, Üretim yılı: 2003, çalışma saatleri: 12.561 h, Donanım: her tahrikli, = Diğer seçenekler ve aksesuarlar = - 2 aks - 4x4 = Notlar = Genel Üretim ülkesi: ALMANYA Durum CE tipi: CE, EPA, TÜV = Diğer bilgiler = Genel bilgiler Kapı sayısı: 1 Teknik bilgiler Ön aks: Kumandalı Arka aks: Çift tekerlekli Tahrik: Tekerlekli Motor markası: DEUTZ Azami toplam ağırlık: 17.500 kg Fonksiyonel Hızlı değişim sistemi: Evet CE işareti: evet Durum Teknik durumu: iyi Görsel durumu: iyi Pjdozhgnhspfx Ahhepu

Durum: ikinci el, Üretim yılı: 2006, çalışma saatleri: 14.683 h, Donanım: her tahrikli, Ayarlanabilir bom, ikiz lastikler, ikinci el araç Pedpfeyg T Ersx Ahhopu Araç no: 3285, Liebherr A 316 Litronic tekerlekli ekskavatör, yıl: 2006, çalışma saati: 14.683, ayarlanabilir bom, klima, lastikler: 10.00-20, ara halkalı ikiz lastikler, ataşmanlar için hidrolik bağlantılar, 2.550 mm tesviye bıçağı, Liebherr SW 48 hızlı değiştirici, 1 x TL 1 metre, 1 x hidrolik GL 2 metre, 4 silindirli Deutz dizel (86 kW), yakıt pompası, 20 km/s, toplam ağırlık: 17.500 kg, kendi yürür iş makinesi olarak tescilli, Taleplerinizde lütfen dikkat: Hatalar ve ara satışlar saklıdır.

Durum: ikinci el, ilk tescil: 02/2004, renk: diğer, Üretim yılı: 2004, Plaka: QAAB135 Pedpfx Aszf U Ukshhopu

Durum: ikinci el, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 38.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.480 mm, yükleme alanı genişliği: 2.540 mm, Donanım: ABS, * 9008 – Vehicle ID for telephone inquiries * Low-bed semi-trailer, Type: MTS-3 * Special low-bed semi-trailer for aerial work platform transport with fold-down rear * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with lift/lower function, first axle liftable, third axle friction-steered with additional steering * Gooseneck, front wall, lashing eyes, storage boxes * 24 V electric pump via NATO plug * Electric winch * Radio remote control for winch and hydraulics * Rear loading platform hydraulically foldable up and down, hydraulic extendable ramp * Hydraulic ramp at the gooseneck, can be raised * Grating floor on the entire loading area Podpoy I Iahofx Ahhspu * Technically permitted gross weight: 41,500 kg * Tires 1st axle: 235/75R17.5 (6 / 8 / 11 / 11 mm) * Tires 2nd axle: 235/75R17.5 (9 / 9 / 9 / 9 mm) * Tires 3rd axle: 235/75R17.5 (11 / 11 / 9 / 9 mm) ---Our e-mail address: Our service for you: - Procurement of temporary or export license plates - Nationwide delivery/transport within the EU - Customs clearance for vehicles to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Durum: ikinci el, makine/araç numarası: VF9DS0300J002xxxx, Üretim yılı: 2018, Please state the reference number upon request: 23354 Specifications: - Model year: 2018 - EU-approved until: 13.02.27 - 3 axles - Tires (see photos) - Sliding tarpaulin - Full side opening - Unladen weight: 10,140 kg - Gross vehicle weight: 45,000 kg - Length: 1,404 cm - Width: 255 cm - Ready for delivery Description: We are offering a 2018 Legras 3-axle walking floor semi-trailer for sale. Everything is in perfect working order and it can be put into operation immediately. There are some cosmetic damages (see photos). Ready for delivery. TÜV: Yes Ppsdpfx Ahey Sfr Aohou EU approved until: 13.02.2027 Unladen weight: 10,140 kg Gross weight: 45,000 kg Payload: 34,860 kg Width: 255 cm Length: 1,404 cm Model: Walking Floor 3-axle semi-trailer = Further information = Please contact ATS Norway for more information.

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.500 mm, yükleme alanı genişliği: 24.800 mm, toplam uzunluk: 130 mm, toplam genişlik: 24.800 mm, renk: beyaz, Üretim yılı: 2024, - Yaprak yaylı süspansiyon Podoy Rt R Dopfx Ahhopu

Durum: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (anti blokaj sistemi), bağlama halkaları, iki parçalı çıkış rampaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlekler, alet kutusu. Üst yapı: Hidrolik iki parçalı çıkış rampalı (hidrolik olarak katlanabilir ve yana kaydırılabilir) 3 akslı alçak şasi dorse, galvanizli rampalar, 3x 10 tonluk SAF akslar, kampanalı frenler, ekskavatör kolu için oyuk, 50 mm çekme gözü! Ppodpey R Ekisfx Ahhju Üst platform yaklaşık 1500 mm, alt platform yaklaşık 6300 mm! Rampa uzunluğu yaklaşık 4200 mm! Ek ücret karşılığında uygun 40 mm çekme barı da temin edilebilir! AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve hatalar saklıdır!

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ppedpfeqpgtmjx Ahhou

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 05/2015, yükleme alanı uzunluğu: 13.490 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.060 mm, süspansiyon: hava, lastik boyutu: 265/70R19.5, renk: siyah, Üretim yılı: 2015, Donanım: hidrolik arka platform, Axle configuration Tyre size: 265/70R19.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Tyre tread depth, left inner: 40%; Tyre tread depth, left outer: 40%; Tyre tread depth, right inner: 40%; Tyre tread depth, right outer: 40% Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Tyre tread depth, left inner: 40%; Tyre tread depth, left outer: 40%; Tyre tread depth, right inner: 40%; Tyre tread depth, right outer: 40% Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steered; Tyre tread depth, left inner: 40%; Tyre tread depth, left outer: 40%; Tyre tread depth, right inner: 40%; Tyre tread depth, right outer: 40% Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steered; Tyre tread depth, left inner: 40%; Tyre tread depth, left outer: 40%; Tyre tread depth, right inner: 40%; Tyre tread depth, right outer: 40% Weights Unladen weight: 14,700 kg Payload: 45,300 kg Podpezd T Umsfx Ahhepu Gross vehicle weight (GVW): 60,000 kg Functional Loading platform height: 106 cm Extendable body: Yes Condition Technical condition: good Visual condition: good

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering Ppedey Ngzyspfx Ahhsu ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 28.600 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 25 m³, Üretim yılı: 2026, Frenler: * Wabco EBS-E / ABS (elektronik fren sistemi ve RSS ile) * Yaylı akümülatörler için acil açma tertibatı * 22,5" disk frenler * Arkada kısaltılmış çamurluklar ile finişer freni ve manuel finişer anahtarı ----Akslar: * 3 x 9 ton BPW veya SAF aks (mevcudiyete bağlı olarak) * Kalkış yardımcı donanımlı kaldırılabilir aks ----Süspansiyon: * Devrilme işlemi sırasında otomatik alçaltma ile havalı süspansiyon (stabilite artırımı için, tavan finişerleri için devre dışı bırakılabilir) ----Elektrik / Aydınlatma: * Lastik basıncı izleme sistemi (TPMS) * 1 x 15 pinli treyler soketi * Eco-LED II aydınlatma koruyucu çatılı * 1 x ek LED çalışma lambası * Yanlarda yanıp sönen işaret lambaları ----Genel Ekipmanlar: * Alüminyum hava tankı * Teleskopik çelik destek ayakları, tabla tabanlı (yalnızca boşken ayrılabilir) * 4 m alüminyum yanaşma merdiveni sağ yanda, çamurluklar üzerine yerleştirilmiş * Kapalı plastik tekerlek davlumbazları * Katlanır arka alt koruma * Arka çekme halkası * Sol ön yan tarafta katlanır çıkış merdiveni * Ön duvarda evrak kutusu ----Şasi: * Yüksek dayanımlı ince taneli çelikten yüksek tip şasi, Meiller'e özgü burulma traversleri ile ----Devrilme Kasası: * STEELECT 450 çelikten yarım daire arka devirmeli havuz kasa -HBW 450- * Ön duvarda 600 mm ön tavan, branda taşıyıcı olarak * Yanlarda içe eğimli, güçlü çevresel üst kuşak ----Taban, Yan Duvarlar, Ön ve Arka Duvar Kalınlığı: * Ön, yan ve arka duvar 4 mm * Ön ve arka duvar eğimli * Taban 5 / 6 mm (özelleştirilmiş) ----Hidrolik Silindir: * Ön hidrolik silindir, orta seviyede çalışma basıncı ----Hidrolik Arka Kapak: * Yatırılabilir ve salınımlı hidrolik arka kapak. Hidrolik arka kapağın kontrolü mekanik küreli vana ile ----Branda: * Elektrikli kayar branda -RAL 9006 beyaz alüminyum-, şasi üzerindeki manuel anahtar ve uzaktan kumanda ile ----Yükleme Hacmi: * yakl. 25 m³ ----Saddel Yüksekliği: * Boşken yaklaşık 1.350 mm * Yüklüyken yaklaşık 1.340 mm ----Boya: Ppjdpsxxf Tqefx Ahhju * Şaside RAL 7021 siyah gri * Devrilme kasasında RAL 9006 beyaz alüminyum ----Genel Bilgiler: * --Teknik olarak izin verilen toplam ağırlık 39.000 kg-- * Hatalar ve ara satışlar önceden bildirilmeden değiştirilebilir * Üretici garantili yeni araç ----Teslimat Süresi: * 37. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: Ppjdpel Tnvgefx Ahhsu * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: Pjdpfx Ajy Ngz Hshhjpu * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: Podpopk D I Asfx Ahhspu * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 37.619 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.240 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of manufacture: 2025 | NEW | 40-t ramps | Premium specification Location: Germany Condition: New / unused Availability: Immediate Description For sale: brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year 2025. Ideal for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – immediately ready for use. Technical Data Ppsdpfxsx Efzuo Ahheu Dimensions Total length: 13,190 mm * Platform length: 9,240 mm * Platform height: 875 mm * Total width: 2,550 mm (+600 mm with side extensions) * Gooseneck length: 3,950 mm * Unladen weight: approx. 10,381 kg Weights Perm. gross weight 80 km/h: 48,000 kg * Perm. gross weight 60 km/h: 52,800 kg * Total axle load: 30,000 kg * King pin load: up to 18,000 kg Chassis & Axles 3 BPW axles, air suspension, drum brakes * 1 trailing axle at the rear * Lift axle (load-dependent + automatic in-cab control) * Tyres: 245/70 R17.5, M+S + 3PMSF * Tyre pressure monitoring R141 * Wabco EBS 4S/3M, ABS + RSS * Wabco Smartboard (axle load, suspension, diagnostics etc.) Ramps & Loading Area Foldable 40-t loading ramps * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * 45-mm hardwood floor + chequer plate above wheel arches Load Securing Multiple 8,000 daN and 13,400 daN lashing points * 7×2 stake pockets + plug-in stakes * Container locks for 1×20 ft * Front wall 450 mm, side & rear walls in aluminium Body & Chassis High-tensile S700 MC steel * Partially metallized (Zn/Al 85/15) – enhanced corrosion protection * Rear angle: 10°, 500 mm * 2" king pin * Mechanical landing legs at front * 45-t supports at rear Equipment 2× toolboxes * All-round beacon * LED lighting * Rear work lights * Wheel chocks * Extensions 9×2 (up to +300 mm) * Stake box * Reflective marking on sides & rear Colour: RAL 3020 Traffic red For further information, please feel free to contact us.

Durum: ikinci el, Üretim yılı: 1985, Please quote reference number: 23586 Specifications: Year of manufacture: 1985 The entire trailer was restored in 2016, with all components replaced and updated. EU approval valid until: 16.10.26 3 axles. Steering on the 3rd axle (remote-controlled with friction steering), renewed in 2016. 3 new axles, installed in 2016. Chassis sandblasted and painted in 2016. New wooden flooring in 2016. New electrical system in 2016. New control system in 2016. Onboard power generator. Ready for delivery. Description: We are offering for sale a 1985 Hafo 3-axle machinery semi-trailer that was restored in 2016. Everything was disassembled down to the chassis and fitted with new components in 2016 (see specifications). Everything functions as it should and is in good condition. Ready for delivery. Km: 1 Power (HP): 72 TÜV: Yes EU approved until: 16.10.2026 Pjdpfjzbp Rajx Ahhopu Unladen weight: 14,960 kg Total weight: 65,000 kg Payload: 50,040 kg Width: 2,500 mm Length: 17,250 mm Model: Hafo 3-axle machinery trailer, restored in 2016 = Further information = Please contact ATS Norway for more information.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2007, toplam uzunluk: 13.630 mm, toplam genişlik: 2.540 mm, dingil mesafesi: 10.370 mm, Üretim yılı: 2007, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Havalı süspansiyon = Ek bilgiler = Ppodpjzd Aqdjfx Ahheu Boş ağırlık: 16.380 kg Yük kapasitesi: 28.620 kg Azami toplam ağırlık: 45.000 kg Yük platformu yüksekliği: 95 cm Hasar: yok Plaka: OJ-15-SY

Durum: ikinci el, azami yük ağırlığı: 31.300 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.050 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Meusburger MPG-3 Alçak Tır Perdeli, Yönlendirilebilir/Kaldırılabilir Dingil Donanım: Havalı süspansiyon * Dingil kantarı * 1. dingil kaldırılabilir * 3. dingil yönlendirilebilir * Ek destekli ve uzaktan kumandalı hidrolik rampa * Geçişli rampa * Uzaktan kumandalı elektrikli vinç * Edscha tavan * Her iki tarafta depolama kutuları * Yedek lastik (yolda kullanım için) * Ekstra farlar * Çıkarılabilir genişlik levhaları Güvenlik: ABS * EBS Ppodpowfwd Dofx Ahhou * Disk fren Hatalar ve ön satış hakkı saklıdır. Dahili araç numarası: 8303

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı Podpsycpbnsfx Ahhspu - Rampa askı rayı - Yükleme alanı için takma çıtalar - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için