Kullanılmış Fliegl Tps 118 Bau Mit Heckan Tandem Plattf Rampen satın al (11.147)

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 7.500 kg, azami yük ağırlığı: 18.700 kg, toplam ağırlık: 26.200 kg, dingil konfigürasyonu: 2 dingil, toplam uzunluk: 12.400 mm, toplam genişlik: 2.550 mm, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Itodpfxsi Ri Hro Al Rok Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 4.600 kg, azami yük ağırlığı: 13.400 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.370 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 7.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.350 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı ihtiyacınıza göre yapılandırın. Gösterilen araç bir örnektir. Üretim ve donanım, müşteri taleplerine göre bireysel olarak gerçekleştirilir. *Şasi Tandem Damperli Römork Çelik kaynak konstrüksiyon, arka kısımda sürekli devrilme mili ile 100 mm küresel devrilme yataklaması, Vites destek ayağı önde, katlanabilir arka destek, tutuculu takozlar, çelik alt koruma Her dingilin önünde ve arkasında çeyrek şamandıralı çamurluklar, her dingilin arkasında su sıçrama önleyici perdeler, Yükleme alanının altında alüminyum rampa için kilitlenebilir saklama bölmesi 1 çift alüminyum rampa, yaklaşık 3.600 mm uzunluğunda, 400 mm genişliğinde, çift başına taşıma kapasitesi 8.000 kg Plastik alet kutusu, raflı, b=620/y=360/d=440 mm, asma kilitli kilitlenebilir *Çekiş sistemi Tandem Römork Test edilmiş çekme halkalı çekme kolu *Dingiller + Süspansiyon BPW kampana frenli akslar, hava süspansiyonu havalı kaldırma & indirme valfiyle *Tekerlekler ve Lastikler 385/55 R 22,5", üretici tercihi, çelik jantlar, fabrika gümüşü *Fren sistemi Itedpfxjzcyl Re Al Rsk 2 hatlı basınçlı hava fren sistemi, yay depolu park freni, Önde 2 karıştırılamaz bağlantı başlığı, motorlu araca bağlantı hatları ile EBS, Elektronik Fren Sistemi, önde EBS fişi ve bağlantı kablosu ile Dikkat: Römorklu araç sadece ABS etkisini sağlayabilen çekici araçlar tarafından çekilebilir! *Elektrik 24 Volt, çok odacıklı farlar, yanlarda sarı LED aydınlatma Önde 2 beyaz pozisyon lambası, arkada 2 beyaz/kırmızı şerit takip lambası Önde 2 adet 7 pinli karıştırılamaz fiş ve bağlantı kablosu *Hidrolik Üç yana devirmeli sistem, strok limiti ve emniyet halatı olan hidrolik çok pistonlu pres SVK fişli NW 10/3 hidrolik bağlantı, bağlantı hortumu dahil Kullanımı, kamyon PTO (yardımcı tahrik) ile hidrolik olarak *Damper Kasası Çelik sac taban HB 400, 4 mm kalınlığında, arka kısımda 100 mm çapında küresel devrilme yataklaması Çelik yan duvar yapısı, yan duvarlar aşağıya katlanabilir ve sallanabilir şekilde merkezi kilitleme sistemiyle. Ön ve yan duvarlar yaklaşık 800 mm yüksekliğinde, arka duvar çelikten, yaklaşık 600 mm yüksekliğinde, kombi sarkaçlı kapı şeklinde, yan duvar geri çekilme yayları Tabanda dışta 4 çift bağlama halkası, her biri 3 ton, tabanda 2 çift bağlama halkası, her biri 5 ton *Ruhsat / Levhalar Ruhsat ülkesi: Almanya Dekra onayı ve raporu ile 7/24 servis hattı Tek satır plaka için hazırlanmış ECE R 048'e göre yanlarda beyaz ve arkada kırmızı yansıtıcı şeritle kontur işaretleme ECE - 70 uyarınca uyarı levhası Boya Şasi: isteğe bağlı galvanizli veya boyalı Yan paneller/kasa: müşteri isteğine göre boyalı Özel Taşıma Çözümü Fliegl aracınızı ihtiyacınıza göre yapılandırın. Gösterilen araç bir örnektir. Üretim ve donanım, müşteri taleplerine göre bireysel olarak gerçekleştirilir.

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Itjdpfx Alspk D D Hj Rok ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Fren: * EBS fren sistemi * Yaylı akü silindirleri için acil serbest bırakma mekanizması * Tamburlu frenler ----Aks: * 2 x 5,5 tonluk BPW akslar ----Süspansiyon: * Dengeleyici üniteye sahip yaylı süspansiyon ----Çekme çubuğu / Flanşlı çekme çubuğu: * 300 mm yukarı/aşağı ayarlanabilir çekme çubuğu * 40'lık flanşlı çekme çubuğu ----Genel Montaj Parçaları: * Jost ön destek ayağı * Dışa monte, sıcak daldırma galvanizli katlanabilir destek ayakları (arka) * Plastik çamurluk * Plastik alet kutusu (ön, sağ tarafta, ön panelde) ----Elektrik / Aydınlatma: * RDÜ lastik basıncı izleme sistemi * LED aydınlatma ----Yükleme Alanı: * 6,27 m yükleme alanı * Konteyner taşımacılığına uygun * 50 mm kalınlığında iğne ağacı taban * Ön panelde, konteyner kilitleme mekanizmalarının sonradan monte edilmesi için düzenek * Vidalanmış, pürüzsüz sacdan yapılmış ön panel * Trapez profilinde çelik sacdan yapılmış, menteşeli yan duvarlar (bordür yükseltici yaylı) * Çelik arka panel, kullanılmadığında rampaların tutucuları arasına itilebilir, iç kısımda ön panelin önünde * Arka destekler vidalı ----Yük Sabitleme: * Yaklaşık 45 derece eğimli, delikli dış çerçeve, her 480 mm'de 2 ton çekme kuvveti * Her 600 mm'de 3 tonluk düşey bağlama halkalarının monte edilmesi mümkündür * Ön ve arka köşelerde, her birinde 1 x 6,3 tonluk bağlama halkası * Ön ve arka traverslerde, 1,2 tonluk sabitleme imkanı için çeşitli delikler ----Rampalar: * Tek parça, mekanik rampalar, tek kişiyle kullanıma uygun yaylı mekanizma, yaklaşık 2.750 x 600 mm (20 mm'ye kadar birbirine kaydırılabilir) * Arka kısımda yaklaşma eğimi yaklaşık 860 mm ----Lastikler: * Lastik ebatları: 235/75R17.5 Isdpjq Ra D Eofx Al Retk ----Dingil Mesafesi: * Dingil mesafesi: 990 mm ----Boya: * Sıcak daldırma galvanizli şasi, çekme çubuğu, ön panel, arka panel, arka destekler ve rampalar * Bordürlerin boyası RAL 9010 saf beyaz renk * Yan duvarların boyası, ek ücrete tabi olarak RAL renk tonunda yapılabilir ----Bilgiler: * Hatalar ve ön satışlar mahfuzdur * Üretici garantili yeni araç ----Teslim Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty Ijdpjl Th Hwofx Al Rotk * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards Iodemi Tmaopfx Al Retk ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.200 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 6.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle to suit your requirements. The pictured vehicle is an example. Production and equipment are tailored individually to customer specifications. Chassis Central Axle Low-bed Trailer Fine-grain steel welded construction Front gearbox support leg Rear telescopic support 2 wheel chocks with holders Steel mudguards covering both wheels Isdpfxoi Ri Ebs Al Rstk Aluminium side underrun protection Central axle trailer drawbar Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Laser-aligned axles/chassis" for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bearing and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" Brand according to manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake 2 interlock-proof coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at front, including connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrical System 24 Volt, multi-chamber rear lights, side yellow LED marker lights 2 white position lights at front 2 white/red marker lights at rear 2 x 7-pole interlock-proof plugs at front, including connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel sidewalls solidly welded to the floor Platform length 4,500 mm Trough front and sides with "Load-Lock profile" for securing lashing straps (8 front, 12 per side) Note: Minor floor rippling possible due to welding distortion! 2 pairs of lashing points, 1x in front corners of the steel trough and 1x rear in the floor, each rated for 5t Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With grab handle on ramps Wooden covering (front ends with steel/chequer plate) With gas pressure springs for single-person operation Operating Instructions The stated gross weight is technically achievable; depending on cargo, the gross weight may not be attainable while complying with permissible axle, drawbar, and coupling loads. (Poor tracking and trailing behaviour may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanised as per customer specification Loading ramps hot-dip galvanised Customised Transport Solution Configure your Fliegl vehicle to suit your requirements. The pictured vehicle is an example. Production and equipment are tailored individually to customer specifications.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.520 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Tailor-made Transport Solution Configure your Fliegl vehicle to your specific requirements. The vehicle shown is an example. Production and equipment are individually customized as per customer specifications. Chassis Center Axle Low-Bed Trailer Fine-grained steel welded construction Front landing gear with gearbox support Telescopic rear support legs 2 wheel chocks with holders Steel fenders covering both wheels With anti-spray mud flaps only on the last axle Aluminum side underrun protection Front transverse stop, insertable in floor holes Itsdpfszcnugjx Al Rjk Drawbar system for center axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Axle / chassis laser alignment" - reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line compressed air brake system Spring actuated parking brake 2 fail-safe coupling heads at the front, with connection lines to tractor unit Parking sockets for electrics, ABS/EBS, and air coupling at the drawbar 24 Volt EBS, Electronic Braking System with front EBS connector, including connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! "TPMS" Tire Pressure Monitoring System according to ECE R 141, indication on tractor display, via EBS Electrics 24 Volt, multi-chamber LED lights, side yellow LED lighting, number plate illumination in LED Side yellow LED lighting linked to indicators ("flashing side markers") 2 front white position lights in LED 2 rear white/red lane position lights in LED Premium LED side marker lights, with 20 LEDs per light 2 x 7-pin fail-safe plugs at the front, with connection cable Superstructure/TTS Platform Low-profile steel trough, deck made of steel/checkered plate, steel sidewalls solidly welded to floor Platform length 5500 mm Front and sides equipped with "Load-Lock profile" for lashing strap attachment (8 at the front, 16 per side) 2 pairs of lashing rings, 1 x front in steel trough corners, 1 x rear in the floor, each 5 t 3 additional pairs of lashing rings in the floor, each 5 t 4 pairs of lashing rings bolted to side walls Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With grab handle on ramps Wooden inlay (tip area with steel/checkered plate) With gas strut for single-operator use Rear Panel / Corner Stanchions Film-faced plywood board, 400 mm high, insertable, between access ramps Operating Note The stated gross weight is technically possible; depending on the load, gross weight may not be achievable due to legal axle, support, and kingpin load limits. Registration Country / Signage Registration country: Germany Certification according to EC 2007/46 Prepared for single-line number plate holder Contour marking with reflective tape as per ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Tailor-made Transport Solution

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3.100 kg, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 7.690 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin (size 2) Container Mounts: 1 x 20-foot container centrally positioned (or swap body containers 7.15 / 7.45 m), front not retractable, container locking twistlocks in extended version 24 t two-speed landing legs, single-sided operation with anti-spray mud flaps as per EC regulations Stainless steel drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, perforated step plates approx. 400 mm wide, left and right between drip tray and longitudinal beams 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on hose pipes 1 stainless steel grounding lug at the rear right of the frame, with international grounding label on the frame Access steps on the rear right onto the underrun guard, at the rear externally on the main beam, step plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, activated by braking three times Brake System 2-line compressed air braking system Coloured piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, Electronic Braking System with EBS socket at the front, no connection cable included Note: The trailer may only be towed by tractors that guarantee ABS functionality! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be pre-equipped, truck installation not included, not a calibrated scale) Wheels and Tyres 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver finish Electrics 24 volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at the front 2 white/red lane marker lamps at the rear Itsdpfxei Rixks Al Rsk 1 x 15-pin socket at the front, without connection cable Operational Instructions The total weight specified is technically possible; depending on the cargo, the total weight in compliance with permitted axle/support/king pin loads may not be achieved (poor driving and tracking behaviour possible if load distribution is incorrect) This vehicle must only be loaded with 20' tank containers compliant with ISO 668 and specifically ISO 1496-3! Tank containers must have 'end-load-transfer areas.' Country of Registration / Plates Germany Type approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 ADR inspection according to 9.1.1.2 of the ADR, EX/II, EX/III / approval certificate for vehicles transporting specific dangerous goods (ex.B3) with warning board at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Contour marking with reflective tape

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 5.070 kg, azami yük ağırlığı: 33.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı yüksekliği: 990 mm, toplam uzunluk: 13.990 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/55R22,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is a sample. Production and equipment are customised to individual customer specifications. Chassis: Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container Mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Mid-telescopic 1st stage, rear extension extended to 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Mid-telescopic 2nd stage, rear extension extended to 2nd stage: 1 x 45 ft with gooseneck tunnel and rearward overhang Mid-telescopic 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Telescopic centre frame as intermeshing central tube with pin locking Rear height adjustment and folding centre supports for containers without tunnels Demountable front container guides, plug-in type Plug adapter for front locking, for securing containers without tunnel from below, with bracket for storage when not in use Front extension roller-mounted, manually extendable (for 45 ft containers with long tunnels) Rear extension roller-mounted, with hand crank 24 t, 2-speed landing gear, single-sided operation Extendable underrun protection for 45 ft container Rear underrun bumper Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tyre wear and fuel consumption Offset axle spacing mm (combined traffic) for up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation via 3x braking (starting aid operates up to 30% overload of axle load and up to a max speed of 25 km/h) Braking System Dual-circuit compressed air braking system, colour-coded lines for easy servicing. Spring-loaded parking brake Telescopic Control Axle relief for easy telescoping 2 anti-mix coupling heads at front, without interconnect line EBS, Electronic Braking System with EBS socket at front, without signal cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of ABS! with lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in driver’s cab – truck must be prepared accordingly, no truck installation (no certified scale) Wheels and Tyres 385/55 R22.5, manufacturer brand at maker's discretion Steel rims, factory silver Electrics 24-volt system, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note: with certain tractor units, diagnostic errors may occur, despite full functionality) 2 white position lights at front Iodpfei Ri R Sjx Al Rotk 2 white/red lane marker lights at rear 2 x 7-pin anti-mix sockets at front, without interconnect cable Operating Instructions When transporting 45 ft containers with short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and maximum overall length of 16,500 mm will be exceeded! Rear underrun protection must be extended manually! Exemption approval according to § 70 StVZo is required! Registration / Plates Germany Type approval according to EC 2007/46 24/7 Service Hotline Customised Transport Solution

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 6.800 kg, azami yük ağırlığı: 28.200 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.000 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.645 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised according to the customer’s specifications. Itedszb Iu Depfx Al Rok Chassis – Semitrailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing strap hooks, 24 ton, 2-speed landing gear, single-side operation, ferry lashing eyes, yellow marked, with 2 at the rear as towing eyes, container locks: 4 pairs of container locks recessed in the floor for 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame, internal dimension 80 x 80 mm, centre stake pockets recessed in the floor, 80 x 80 mm, removable stakes B=80 / D=80 / L=1200 mm, hot-dip galvanised, lashing eyes recessed in the outer frame, 5 ton each, 2 storage boxes approx. W=1230 / H=450 mm, fitted closed across the full width in front of the axles, instead of side underrun protection, frontmost locking as insertable pin, transverse lashing/ stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, fitted with 20 mm round steel rods top and bottom, vertical spacing approx. 60 mm, bottom with angle plate at the end, half open downwards. For lashing and fitting of 80 x 80 mm stakes. Storage compartment for warning signs, open, according to technical feasibility. Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift function, including automatic lowering and drive-off aid, operated by “3x brake”, two ride heights adjustable via hand button: - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Braking System 2-line compressed air braking system, colour-coded pipe routing for easy servicing, spring-loaded parking brake, 2 fail-safe Coupling heads at front, EBS (Electronic Braking System) with EBS socket at the front, with raise and lower valve, vehicle stability control. Wheels and Tyres 385/65 R 22.5" steel rims, finished in factory silver. Electrics 24 volts, 4 x 3-chamber tail lights, yellow LED side marker lights, 2 white LED position lights at the front, 2 white/red LED lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable, rotating beacon with bracket controlled via parking light (removable beacon), 2 pairs of warning signs, double LED illuminated, extendable to 4500 mm and removable with plug connector. With additional bracket at the rear. Additional 7-pin socket (to ISO 1724) in rear underrun protection. Floor Birch plywood flooring approx. 30 mm thick, cross joints with omega inlay, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7100 kg. Front Bulkhead / Front Corner Posts 25 mm aluminium hollow profile, 1650 mm high, corner posts in steel (volume type), front wall interior additionally reinforced with 1250 mm high birch plywood, "Crash Blocker", lower interior approx. 140 mm high with steel impact protection, stake storage 80 x 80 mm on front wall inside. Painting / Coating Frame: Hot-dip galvanised including passivation or painted as per customer. Landing gear: Black coated Front corner posts: galvanised and painted in bulkhead colour. Bulkhead: natural aluminium or painted as per customer

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21001012243, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: mavi, The images shown are archive photos! The vehicle may currently be in use! Further information Chassis Central axle low-bed trailer Fine-grain steel welded construction, gearbox support foot at front, telescopic rear support, wheel chocks with holder, steel fenders covering both wheels Central axle trailer draw device Drawbar with inspected 40 mm towing eye, drawbar height adjustable via spindle, max. adjustment range 250 mm Itodpfx Asqmc Raol Rsk Axles & suspension Euro axles of our selection, with tapered roller bearings and S-cam brake, axles/chassis laser aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) braking system 2-line compressed air brake system, spring-loaded parking brake, two fail-safe coupling heads at the front with connecting lines to the towing vehicle, ABS and ALB, ABS plug at the front with connection cable Attention: The trailer may only be towed by vehicles that ensure the functionality of the ABS! Electrical system 24 volts, multi-chamber lights, yellow LED side lighting, two white position lights at the front, two white/red lane marker lights at the rear, one 15-pin plug at the front with connection cable Deck TTS Low steel trough, deck floor made of steel/chequer plate, steel side walls solidly welded to the floor, deck length 5,500 mm, trough equipped at front and sides with load-lock profiles for lashing straps (8 at front, 16 per side) Note: Slight floor rippling possible due to weld distortion! Pair of lashing rings, one at each front corner in the steel trough and one at the rear in the floor, each rated at 5 tons; additional lashing rings in the floor, each rated at 5 tons Loading ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable, with carry handle on the ramps, equipped with wooden surface, gas strut supported for single-person operation Operating instructions The stated gross weight is technically possible. Depending on the cargo, the gross weight may not be attainable while complying with permissible axle/support/kingpin loads. (Poor driving and trailing characteristics possible in case of incorrect load distribution) Country of registration/ Registration plates Country of registration: Germany, with Dekra inspection and appraisal (according to §13 EG FGV), prepared for one-line license plate holder, contour marking with reflective strips according to ECE R 048, white at sides and red at rear The images shown are archive photos! The vehicle may currently be in use!

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 14.680 kg, azami yük ağırlığı: 35.320 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.300 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 600 mm, toplam uzunluk: 15.400 mm, toplam genişlik: 2.550 mm, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Low Loader Semi-Trailer Steel welded construction, fifth wheel plate with replaceable 2-inch kingpin 24 t two-speed landing gear, single-side operation, with straight lower part, without lateral compensation Rear support foldable 2x wheel chocks with holders Aluminium side underrun protection Quarter shell mudguards in front of and behind axle assembly With mud flaps behind each axle 1x storage box, width = 2,350 mm x length = 730 mm x height = 640 mm, mounted transversely at the front on the swan neck floor, with 2 storage trays Extendable widenings to 3,000 mm (not at the rear chamfer) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks on the swan neck, front transverse 70 mm timber planks for extension to 3,000 mm Excavator trough starting over the rear axles to the tail, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes each 10 t at front swan neck, 8 pairs each 10 t in the low bed, 3 pairs of lashing rails in the driving lane area of the low bed, 3 pairs of lashing eyes each 10 t in the axle/rear area Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned for reduced tyre wear and fuel consumption With steering axle Air suspension Wheels and Tyres 235 / 75 R 17.5 At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake System 2-line compressed air brake system, colour-coded piping for easy service. Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Note: Towed vehicles must only be pulled by tractor units that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, no connection line With raise & lower valve, hold function in down position + auto-reset function Axle load sensing via EBS CAN bus signal, display in cab requires suitable truck preparation, not installed (not a certified scale) Vehicle Stability System Iodpfx Aloi Ri Hgs Rotk Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostic/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 front white position lights in LED 2 rear white/red lane marker lights 2 x 7-pin non-interchangeable sockets at the front 1x additional LED work light at the rear 1x LED beacon with bracket, controlled via side lights 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Swan neck with steel / chequer plate covering In the lane area with 70 mm softwood floor, in the wheel arch area with steel / chequer plate covering, low bed left and right in the lane area can be hydraulically lifted for entry, via truck PTO Rear chamfer with 70 mm softwood floor Low bed length approx. 6,300 mm Side Walls 25 mm aluminium hollow profile, 400 mm high, insertable at the front and sides on the swan neck Ramps Steel ramps, 2,800 mm long, 750 mm wide Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 8.900 kg, azami yük ağırlığı: 32.100 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.300 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised as per customer specifications. Chassis: Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions. 24 t two-speed landing gear, single-sided operation, straight lower section, without load equalisation. Foldable rear support. 2 wheel chocks with holders. Side underride protection in aluminium. Quarter mudguards in front of and behind axles. 1st pair of wheel recesses behind the gooseneck, integrated into the low deck loading area, ramped for access. Lower length approx. 1600 mm, recess depth approx. 260 mm. Note: Main frame in this area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note: Main frame in this area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and overall height needs checking, please provide the technical datasheet for the specific wheel loader type (if total height is exceeded). Wheel recess covers, pull-out from main frame, with wooden inserts. Width extensions, extendable to 3,000 mm (not at rear bevel and not at bottom of wheel recesses). Stowage compartment for wooden planks across the gooseneck, front crosswise. Wooden planks 70 mm for extension to 3,000 mm. Lashing Points - Low Loader 2 pairs of ring lashing eyes, each rated at 5 t, at the front of the gooseneck. 11 pairs of lashing mushrooms recessed into the top and side outer frame, each rated at 10 t: Ijdpfji Ri Hcox Al Rotk 2 x on gooseneck, 9 x distributed along the low bed; first lashing point 250 mm from front, last no more than 250 mm from rear, maximum spacing between lashing points 1,100 mm. 8 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm, or alternatively, 5 t ring lashing eyes inset in the floor instead of stake pockets. Axles & Suspension SAF drum brake axles. Axle/chassis laser alignment – reduces tyre wear and fuel consumption. Air suspension. Wheels & Tyres 235/75 R 17.5 Manufacturer of choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. EBS, electronic braking system with EBS socket at front, without connecting cable. 2 foolproof coupling heads at front. With lift & lower valve. Axle load detection via EBS CAN-Bus signal for display in truck cab, truck must be appropriately prepared. Vehicle stability control system. Electrics 24 Volt, multi-chamber taillights, side amber LED lighting. 2 white position lights at front. 2 white/red lane keeping lights at rear. 2 x 7-pin foolproof sockets at front. 1 x LED rotating beacon with bracket, switched via parking lights. 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm, removable with plug. Floor Gooseneck with steel/chequer plate covering. Storage box integrated in transition slope to gooseneck. Subsequently, 70 mm softwood floor; in lower wheel recesses and wheel arch area, steel/chequer plate covering. Low-bed loading area including rear bevel: 9,100 mm. Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable. Additional ramp safety device at bottom. Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised as per custo

Durum: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing Itsdpfx Aleyxh Rzs Rjk

Durum: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible Total technically permissible weight: 24,000 kg / 30,000 kg Payload approx.: 17,400 kg / 23,400 kg Unladen weight approx.: 6,600 kg +/- build tolerance Dimensions approx.: Total length: 10,900 mm Total width: 2,550 mm Neck length: 2,180 mm Low bed platform length incl. rear bevel: 6,500 mm Itedex Nrp Nspfx Al Rsk Rear bevel length: 950 mm Chassis width: 2,520 mm Loading height in loaded low bed: 860 mm Drawbar height: 900 mm Drawbar length: 1,900 mm Features: - Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box integrated in transition slope to gooseneck - 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d) - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined - Ramps with spring-assisted lifting - Frame hot-dip galvanized Subject to errors and modifications.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21001013325, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2023, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: mavi, The images are archive photos. The vehicle may still be in use. Chassis Central Axle Low-Bed Trailer Fine-grained steel welded construction Front gearbox support Telescopic rear support Wheel chocks with holder Steel sheet mudguards covering both wheels Aluminum side underrun protection Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brake "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" Manufacturer’s choice Factory silver steel rims Braking System 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by vehicles that ensure effective ABS operation! Electrics 24 Volt, multi-chamber lights, amber LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin plug at the front, with connecting cable Platform/Tub Low-mounted steel tub, platform floor with steel/chequer plate surface, steel side walls solidly welded to floor Platform length 5,500 mm Front and side with "Load-Lock profile" for lashing straps (8 at the front, 16 per side) Note: Slight floor waviness possible due to welding distortion! Pair of lashing eyes, 1 x in the front corners of the steel tub and 1 x at the rear in the floor, each rated 5 tons Additional pair of lashing eyes in the floor, each rated 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With handhold on the ramps Wooden overlay (ramp tip backed with steel/chequer plate) Gas pressure spring assist for single-person operation Operating Instructions Specified total weight is technically feasible; depending on cargo, the total weight may not be achievable while observing permissible axle, support, and fifth wheel loads. (Poor handling and tracking may result from incorrect load distribution) Isdpfx Aezadb Dsl Rjtk Registration/Country Plates Registration country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Finish Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images are archive photos. The vehicle may still be in use.

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking Ijdpfx Ajpk D D Uol Retk * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires Itsdspk D Dmjpfx Al Rok ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: ikinci el, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2019, visit our company to inspect the vehicle's condition in person. Additionally, we offer the opportunity for a test drive. Please note that the batteries supplied with the vehicle are those currently installed. Should the customer require new batteries, we are available to provide pricing information. Itsdpfx Alox Ep Ibo Rok

Durum: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse Yararlı yük: 28.410 kg Tip: SDS350 Fren: Disk fren Aks: BPW + Havalı süspansiyon 2x destek ayağı (JOST) Uzunluk: 13,60 m Genişlik: 2,40 m Yükseklik: 0,70 m Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz. Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır. Itodpewgghnofx Al Rek

Durum: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha sürgülü tavan * Haldex EBS, ABS, LSV * Kaldırma aksı * Takım sandığı * BPW Eco Plus disk frenli dingiller Itedpfxevhvcfj Al Rjk ----* Lastik ebatı: 385/55R19,5 * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.067 kg * TÜV & SP: Süresi dolmuş -----Hatalar ve ara satışlar saklıdır Araç numarası: 5726 WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden rahatça iletişime geçebilirsiniz Whatsapp Whatsapp

Durum: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha kayar tente tavan * Haldex EBS, ABS, LSV * Takım sandığı * BPW Eco Plus akslar, disk frenli Iedpfx Alevhv H Re Rotk ----* Lastik ebatı: 385/55R19,5 * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.097 kg * TÜV & SP: süresi dolmuş -----Hatalar ve ara satış hakkı saklıdır Araç numarası: 5732 WhatsApp desteği mevcuttur! Araçla ilgili sorularınız veya daha fazla bilgi için lütfen bize WhatsApp üzerinden rahatça yazın. WhatsApp WhatsApp

Durum: yeni, azami yük ağırlığı: 23.920 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, YENİ ARAÇ Fliegl 3 dingilli alçak şasi treyler Tip DTS 300, sıcak daldırma galvanizli Toplam ağırlık 24.000 kg / 30.000 kg Yük kapasitesi 17.920 kg / 23.920 kg Boş ağırlık 6.080 kg Toplam uzunluk 10.900 mm Yükleme uzunluğu 8.680 mm Yatak alanı 6.500 mm, 900 mm yaklaşım rampası dahil Parabolik süspansiyon 2.800 mm uzunluğunda rampalar, hidrolik kumandalı 3.000 mm'ye kadar genişletilebilir, uyarı levhaları ve döner flaşörle birlikte 5,0 ve 10,0 tonluk sabitleme noktalarıyla büyük bağlama paketi Itodoxb Nmyopfx Al Rok 5 çift kazık cebi 40 mm çekme halkası Ek olarak nakliye/hazırlama, Wiesmoor stok yerinden 1.280,00 €/net Kiralama teklifi: Vade 48 ay, kalan değer %40, ön ödeme sadece KDV. Aylık taksit: 500,00 EUR

Durum: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Itsdpfxonzlg Do Al Rek Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.