Kullanılmış Humbaur Çalışma Platformlu Römork satın al (18.848)

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: Kedsl Tik Nopfx Alislt * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete vehicle inventory—including vehicles available immediately or on short notice—can be found on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Loading area with hardwood floor and rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the external frame of the loading area for attaching tension belts (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data. Klsdpeyvnfajfx Alist Brake system: * Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel structure: * Steel construction made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a blast wheel machine after welding, with a second shot-blasting using corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final painting with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint finish tested in salt spray test as per ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the platform, right side in the direction of travel * Galvanized folding supports under the chamfered loading area * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Non-slip painted sand coating on the central frame member * 1 INOX toolbox transversely under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform for accommodating 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm * Rack for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Mount for aluminum drive-on ramps, transversely under the platform behind the axles * 1 beacon light supplied l

Koşul: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included Kljdpfx Ajyvnd Njlist * 1st axle with automatic lift axle function and start-up a...

Koşul: yeni, azami yük ağırlığı: 12.451 kg, toplam ağırlık: 16.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, Donanım: ABS, * Çekilebilir yükleme alanı * Knorr havalı fren sistemi Kledpfx Ajyvnwielist * 3 dingil davlumbazlı frenlerle * Ön ve arka kafes ----* Lastik ebatı: * Teknik toplam ağırlık: 16.000 kg * Boş ağırlık: 3.540 kg * Toplam uzunluk: ----Araç numarası: 11937----Hatalar ve ara satışlar saklıdır----Reklam ve çeşitli yazılar dijital olarak kaldırılmıştır. -----Bir araç satın alırken ortaya çıkan tüm işlemler için size memnuniyetle yardımcı oluruz – lütfen istek ve önerilerinizi bizimle paylaşın, sizin için ilgileniyoruz. Diğer hizmetlerimiz ise ek ücret karşılığında şunlardır:----Eski aracınızın takası, TÜV/SP muayenesi, komple ihracat işlemleri, finansman aracılığı, ihracat plakası başvurusu, araç transferi ve tescili, kurtarma ve araç taşımacılığı.----SİZİN VTS EKİBİNİZ

Koşul: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Klsdsyu Eu Iepfx Aliet Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards Kodpfx Aov D Tbkjlielt ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: ikinci el, azami yük ağırlığı: 39.000 kg, ilk tescil: 09/2006, Üretim yılı: 2006, FRUEHAUF Pritschenanhänger, 3 Achsen, SAF-Vorderachse, Liftachse Typ: Pritschenanhänger Baujahr: 2006 USt-IdNr.: Mehrwertsteuerpflichtiges Fahrzeug, angegebener Preis ist Nettopreis. Spezifikationen: Pritschenanhänger 3 Achsen, 39.000 kg SAF-Achse. Die Vorderachse ist als Liftachse ausgeführt. Der Anhänger befindet sich in einem sehr guten Zustand. Weltweiter Versand kann organisiert werden. Unser gesamtes Angebot finden Sie auf unserer Website: Zusätzliche Ausstattung: * Luftfederung Tony Trucks B.V. | Weitere Bilder auf Anfrage Ansprechpartner | Michel Kurt | Tel: | Whatsapp: | Email: Tony | Tel: | Whatsapp: Exportkosten | Bitte informieren Sie sich vorab zu den Gebühren und Verfahren in Ihrem Land. Standort | Bergschenhoek (NL) | 130 km von der Grenze entfernt | 10 km vom Flughafen Rotterdam The Hague entfernt Haftungsausschluss: Änderungen, Zwischenverkauf und Irrtümer vorbehalten. Die angegebenen Preise verstehen sich exkl. BPM und gelten ausschließlich für den Export. Ksdpfeyw Eraex Alijlt

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2018, yükleme alanı uzunluğu: 6.060 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 300 mm, Errors and prior sale excepted! Internal number: 1448. FEATURES * Platform trailer * 3 axles * Support wheel * AL-KO coupling * Side planks all around ... and much more. Kjdpovwh U Sofx Alijlt ----The vehicle is in unrestored condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing is also possible without a down payment! Do you have any questions? We are happy to advise you!

Koşul: ikinci el, azami yük ağırlığı: 4.930 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 1.990 mm, toplam genişlik: 2.545 mm, toplam yükseklik: 2.850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 ----For equipment and condition, please refer to the photos. ----The vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing possible even without a down payment! Do you have any questions? We are happy to advise you! Ksdewtvvnopfx Aliolt

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/1998, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 850 mm, 2 Dingilli BlomenRöhr Platform Römork SDAH 8,5T İlk tescil: 06.1998 Üretici: BlomenRöhr Yaprak yay süspansiyon Klsdpfev Ridhsx Alist Lastik: 215/75 R17 Uzunluk: 6240 mm / Yükseklik: 2360 mm Muayenesiz (TÜV yok) Ekstra donanım, teknik veriler veya görseller talep üzerine sağlanabilir! Bilgiler taahhütsüzdür/hatalara açıktır! İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler teşkil etmez. Satıcı, hata, giriş ya da veri iletim hatalarından sorumlu değildir. Değişiklik hakkı saklıdır. Sürekli alım-satım ile takas ve kiralama yapılır Belediye teknolojisi ile kanal temizliği için atık yönetimi ve temizlik araçları, sıvı ve tehlikeli madde taşımacılığı

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2009, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2009, Donanım: ABS, KRONE Flatbed Semi-Trailer with Twistlock Pre-Equipment and Stake Pockets (for Swedish-type stakes) German trailer, 2nd owner Technical Data Type: SDP 27 eL Kingpin Load: up to 14,000 kg Axle Load (technically possible): 27,000 kg Gross Vehicle Weight (technically possible): up to 39,000 kg Unladen Weight: from 6,700 kg Payload (technically possible): up to approx. 32,300 kg Wheelbase: 1,310 / 1,310 mm Front frame height: 225 mm Fifth wheel height, unladen: 1,150 - 1,450 mm Internal length: 13,480 mm Internal width: 2,480 mm Front overhang radius: 1,995 mm Klsdpfxsiwwhbe Alist Technical Description: Pre-installed for container Twistlocks 1x40’, 2x20’, 1x20’ centered Mechanical landing legs, 2 x 12 t, semi-round with footplate BPW Eco 9 t axles with air suspension and disc brakes (430 mm), ET 0 With lifting and lowering device Tyres: 6 units, size 385/65 R 22.5 (2x25%, 2x20%, 2x15% tread) Spare wheel holder Plastic mudguards EC brake system incl. vehicle stability system Spring-applied parking brake EBS system 2S/2M, 2 sensors on one axle Diagnostics via ISO7638 connector (EBS supply cable) 24-Volt lighting system with two 7-pin sockets DIN ISO 1185/3731 Multi-function rear lights as per EC incl. rear fog light and reversing lights 2 LED reversing lights 2 contour lights with rubber arms Side marker lights Stake depot for plug-in stakes on the right 30 mm thick platform floor Bolted steel front wall with reinforced centre and corner stakes Height: 1,600 mm Front wall reinforced inside with phenolic plywood 2 rear steel impact corners Delta steel impact profile transversely on the rear frame Water tank Lashing rings on the outer frame Fittings for oversize loads (partly installed)!!! Condition OK in line with age and mileage! Chassis with 'usual rust.' TÜV/roadworthiness certificate and inspection can be supplied new upon request for an extra charge. Transportation/delivery available for an additional fee. All information provided without guarantee! Sale only to businesses or for EXPORT! NOTE: PRICE IS NET PLUS VAT. German, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Koşul: yeni, azami yük ağırlığı: 34.815 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.040 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Saddle height: 950 mm - Total length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: every 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Technical gross weight (80 km/h): 45,000 kg - Technical gross weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg RUNNING GEAR: - BPW axles with air suspension and disc brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension incl. load gauge - 1st axle liftable - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel holder CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood flooring - 8x2 side extensions, extendable up to 300 mm Klodpfx Ael N Syvelist - Telescopic landing legs at front with 50 t capacity - Mechanically folding support legs at rear with 45 t capacity RAMPS: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Front wall made of steel material, 1,700 mm with Code-XL certificate ACCESSORIES: - 1x stainless steel toolbox - Stake box at front wall - 2 x 2 over-width signs with LED lighting - Rotating beacon Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2017, Donanım: ABS, Araç Kimlik No: WKESD00000741987 KONTEYNER KİLİTLERİ Boş ağırlık: 6.430 kg Almanya muayenesi (HU) süresi dolmuş BPW EcoPlus akslar, disk frenli KALDIRMA AKSI Ksdpfx Aljx Ntu Hjislt Tabanda kazık yuvaları, kazık YOK Yanlarda delikli şerit Alet kutusu Lastik: 435/50 R 19,5 Stepne tutucu, stepne YOK Değişiklik, ön satış ve hatalar açıkça saklıdır. Açıklama, aracın genel tanımlamasına hizmet eder ve satış sözleşmesi anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi olmaksızın geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden bir teklif sunmaktan memnuniyet duyarız! Araç reklamla kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Koşul: ikinci el, azami yük ağırlığı: 32.760 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2015, Donanım: ABS, Vehicle Identification No.: WKESD00000656919 CONTAINER LOCKS Unladen weight: 6,240 kg DE MOT due BPW EcoPlus axles with disc brakes LIFT AXLE Stake pockets in the floor, WITHOUT stakes, no side stake rail Toolbox Tyres: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Modifications, prior sale, and errors expressly reserved. The description is for general vehicle identification purposes only and does not constitute a warranty in the legal sense of purchase law. The description in the purchase contract is decisive. Kledpfxot Ady De Aliot Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! Vehicle may be stickered and/or labeled for advertising purposes. Our general terms of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 32.660 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2013, Donanım: ABS, Vehicle identification number: WKESD00000580961 Tare weight: 6,340 kg German MOT (HU) due SAF axles with disc brakes LIFT AXLE PALLET BOX Stanchion sockets in the floor, WITHOUT stanchions Width marker lights Suitable for truck-mounted forklift Tyres: 385/65 R 22.5 Kjdpsiac Iujfx Alijlt Spare wheel carrier WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description is for general identification purposes only and does not constitute a legally binding warranty. The purchase contract description is definitive. Our offer is generally without new roadworthiness inspection (TÜV). If a new inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be stickered and/or labelled with advertisements. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 32.760 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, Donanım: ABS, Vehicle Identification No.: WKESD00000657113 CONTAINER LOCKS Unladen weight: 6,240 kg German roadworthiness inspection (HU) due BPW EcoPlus axles with disc brakes LIFT AXLE Post pockets in floor, WITHOUT posts, lashing rail on sides Toolbox Tyres: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description is binding. Klodpewwykdjfx Aliet Our offering is generally without new roadworthiness (TÜV) inspection. If desired, we are happy to arrange an offer for inspection through our partner workshops! Vehicle may be wrapped or labeled with advertising. Our general terms of delivery and payment apply.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2017, Donanım: ABS, Araç Kimlik No: WKESD00000741988 KONTEYNER KİLİTLERİ PALET KUTUSU – sol taraf kapaksız!!! Boş ağırlık: 6.430 kg Almanya muayenesi (HU) süresi dolmuş BPWEcoPlus akslar, disk frenli KALDIRMA AKSI Tabanda direk yuvaları, DIREKSIZ Yanlarda delikli profil Takım kutusu Lastikler: 435/50 R 19,5 Yedek lastik tutucu, YEDEK LASTİK YOK Değişiklikler, ara satış ve hatalar açıkça saklı tutulur. Açıklama, aracı genel olarak tanımlamak içindir ve hukuki alım anlamında herhangi bir garanti teşkil etmez. Satış sözleşmesindeki tanım esas alınır. Kodpfxjx Ntuys Alijlt Teklifimiz genel olarak yeni TÜV muayenesi olmadan sunulmaktadır. Yeni TÜV muayenesi isterseniz, partner atölyelerimizin bir teklifini memnuniyetle sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Koşul: ikinci el, toplam ağırlık: 2.000 kg, ilk tescil: 08/1995, Reklam brandaları için çerçeveli veya eşya taşımak için uygun römork Klsdpfxjynvdme Alist Konum: Im Erlenkamp 15

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V Klsdpfoq Dyvysx Aliet * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 28.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2006, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 13.630 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2006, Donanım: ABS, 3-axle Schmitz Cargobull SCS 24/L platform semi-trailer VIN: 040199 Chassis / Attachments: * Air suspension // raising and lowering * 3 x SAF axles with disc brakes * Tyres: 445/45 R19.5 * Remaining tread depth: F.~50% M.~90% R.~40% * 1x PVC box * Pallet box * Extension boards * Hot-dip galvanized Kljdpfx Aloykfp Doiot Body: * Platform * Stake pockets on both sides * Heavy-duty lashing rings * L x W: 13.63m x 2.48m Weights: * Gross weight: 35,000 kg * Unladen weight: 6,950 kg * Payload: 28,050 kg Other information: * German vehicle * General inspection (HU)/Safety inspection (SP): 08/26 ---- New main inspections/safety checks or weight reductions/increases available on request. We are happy to assist you in obtaining export/temporary license plates, and can also arrange the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the marketing of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to assist them throughout the process of buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you with organizing special transports. Day plates / export license plates We are happy to assist you in obtaining export/short-term license plates.

Koşul: ikinci el, azami yük ağırlığı: 31.620 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2016, Platform B = 12.000 mm Yükleme uzunluğu: 13.500 mm, yükleme genişliği: 2.480 mm Klodpjx I U E Dsfx Alijt Yükleme yüksekliği: 1.200 mm SAF akslar Son aks yönlendirilebilir (art aks) Havalı süspansiyon Kaldırılabilir aks Genişletme levhaları Enine şeritli yük direkleri Şaside direk cepleri Konteyner kilitleri 2x 20 ve 40 ft

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function Klodpeykx I Hjfx Alist ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles Klsdpfx Astplwioliet * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform Klsdpfx Aljq Dyv Isijt * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: ikinci el, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2023, yükleme alanı uzunluğu: 13.590 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 1.200 mm, Donanım: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth Wheel Load: 12,000 kg Aggregate Load: 20,000 kg Warning signs for overwidth, extendable Steering: System: VSE ETS II, on both axles Axles / Suspension: Number / Capacity / Manufacturer: 2 x 10,000 kg, SAF Brakes: 17.5" drum brakes Suspension: Pneumatic with lift and lower function Axle lift: Not included Axle distance: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel storage boxes Locking positions: 6 pairs, suitable for the following positions: • 11,000 mm bridge rear-aligned • 11,000 mm bridge front-aligned • 2,400 mm bridge rear-aligned • 2,400 mm bridge front-aligned Load securing Lashing eye type: 50kN Vario (see appendix) Quantity + position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c:c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake rows crosswise: 4 rows (positions to follow) Tyres Axle | Position | Dimension | Manufacturer | Model | Type | Rim | Tread Depth 1 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 2 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm Export documents and insurance can be arranged on request for an additional charge! For export transactions, we can prepare the export declaration and registration for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. Kjdpfev T Hyfsx Aliolt For further information, please contact Mr. Lübberding (mobile/WhatsApp) or Mr. Rohe! Please always make an appointment for inspection/test drive! Come and see us. We look forward to your visit. Disclaimer: The information provided on the internet is for information purposes only and does not constitute guaranteed properties. The seller is not liable for typing or data transmission errors, changes, input errors, or mistakes. Subject to prior sale!