Kullanılmış Müller-Mitteltal 11,9 To Tandemkippanh. Mit Anlegerampen satın al (36.489)

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles Pgodpfsy Tr Hisx Alden * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) Pjdey Tr Hcepfx Aldegn ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026

Durum: ikinci el, azami yük ağırlığı: 6.610 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2017, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 34 m³, Üretim yılı: 2017, Donanım: ABS, 2-Axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tyres: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding tarpaulin * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets Weights: * GVW: up to 10,500 kg – downrated to 10,000 kg (no SP required) Pedpfxoy Squpj Aldjgn * Unladen weight: 3,390 kg * Payload: 6,610 kg Other details: * German vehicle * MOT valid until 10/2026 * No SP required due to weight downrating New MOT (main inspections), safety tests, or weight uprating/downrating can be arranged on request. We are happy to assist in obtaining export/transfer license plates, and we can also organise vehicle transfers within Germany. Contact us! --- We speak: German, English, and Russian! --- No liability for typographical or printing errors, changes, prior sale, and errors excepted! ---Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our long-standing experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact person who assists them in purchasing or selling vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you in loading your purchased vehicles. Organising special transports We can assist you with organising special transports. Day plates/export license plates We are glad to help you obtain export or short-term licence plates. Customs clearance We are happy to assist you with customs formalities.

Durum: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed deck with platform extension * Hydraulic loading ramps, adjustable (2 units) * Drivable gooseneck * Additional rear supports * Turntable design ----Dimensions & Loading Platform * Loading platform length approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892 ----Errors and prior sale reserved ----Advertising and various inscriptions have been digitally removed. -----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV or safety inspection Complete export processing Financing arrangement Pedpfey Skl Iex Aldegn Application for export licence plates Vehicle transfer Vehicle registration Vehicle recovery and transport ?YOUR VTS TEAM

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton Boş ağırlık: 6.530 kg Yük kapasitesi: 25.470 kg Podpfex Utq Ssx Aldegn Azami toplam ağırlık (zGG): 32.000 kg

Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Pgodpfjzd Dtgox Alden

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Pgsdpfxoq Euako Aldjn Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse - Seride taşıma kapasitesi yakl.: 11.050 kg - 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir - İç ölçüler: 5.000 x 2.420 x 500 mm - Yüklü zemin yüksekliği 1.040 mm - 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde - Boya: Akslar, yaylar ve hava tankı vb. siyah renkte - Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN - ABS 2 S/2 M, 24 Volt - 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı Pgsdpfx Aoxmwiyoldsn - Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit Opsiyonel donanımlar: Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil 4 mm kalınlığında Hardox 450 çelik taban Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı 1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun Alet kutusu

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Pgodpfxsxw T Uas Aldsn

Durum: ikinci el, azami yük ağırlığı: 4.500 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/1979, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.900 mm, yükleme alanı yüksekliği: 380 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 1979,

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners Pedpfxol Tlhre Aldogn * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical System: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (switched by reverse gear) ----General Attachments: * Manometer - pressure gauge for determining load weight (axles separated over 2 air suspension circuits) * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud flaps with spray protection * Reflective contour tape on sides and rear * Toolbox, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Deck: * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip covering on steel plate of the turntable platform * Hardwood flooring on running surfaces of the low loader deck ----Load Securing (load securing package includes): * In front of the front wall carrier left & right, 1 x 13.4 t UVV lashing point each * 4 holes per side in the turntable platform, each with a lashing capacity of 2 t * 1 pair of lashing points (13.4 t) suspended at the rear left & right in front of the rear cross member * Per side 4 pairs of UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed into the outer frame * Per side 3 stake pockets, each with a simultaneous 2 t lashing option ----Widening Kit: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (except at the rear bevel) * Plank holders for extensions under the chassis, left side in longitudinal direction Pjdpel Tnu Ajfx Aldegn ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points per side in the excavator arm rest ----Ramps: * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks on the ramps made of hardwood * Steel construction prepared for 6-function slider valve ----Loading Height: * Loaded edge (unladen) approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Chassis, turntable frame, folding outriggers, mechanical drop supports, ramps galvanized * --Axles, air tank, drawbar painted in black tone-- ----Info: * Vehicle has a temporary registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible Pgedpfxsx Nli Ns Aldon * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: Pjdoykx Nkspfx Aldjgn * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable Psdpfsy Ngzyox Aldsgn * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): Pgjdpfjy Ngz Hex Aldon * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Podjykx Nqepfx Aldjgn ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends Pgedpfxox Nlkaj Aldon * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding Pgjdpfjxl Nkgjx Alden * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: Psdpfx Aljx Nlkgedjgn * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 11.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Donanım: ABS, * Gooseneck with storage boxes * Self-steering axles * Hydraulic loading ramps * Widenable lowbed ----* Tire size: 235/75R17.5 * Gross vehicle weight: 42,000 kg * Curb weight: 8,700 kg Pjdpfx Aoza Rlijldegn * Overall length: 13,150 mm * Next safety inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertising and various stickers have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle—simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge:----Trade-in of your old vehicle TÜV/safety inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team

Durum: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Düşük Yükleyici, Jant Kovuklu TS 3 RM ML 30,0 - 2 Yükseklik ve Rampa Özellikli * 12 t’den 18 t’ye artırılmış Kingpin yükü dâhildir. Kingpin aşağıdaki şekilde monte edilmiştir: İkinci kingpin pozisyonu 2”, kingpin kröpfung (kıvrım) 2.750 mm’ye kadar dâhil. Arkada serbest döndürme yarıçapı yaklaşık 2.400 mm (minimum 150 mm boşluk tavsiye edilir). Öne doğru serbest döndürme yarıçapı 1.480 mm veya yedek lastikle 1.570 mm. Not: Çekici araç ile yeterli boşluğun müşteri tarafından sağlanması gerekmektedir. Pgjdpfx Ajy R Ipueldsn * Ön ve arka alt jant kovukları için uzatılabilir parçalar (205 mm derinlik). Jant kovukları için toplam 6 adet yerleştirme kirişi. Kiriş tutucu olarak kabul edilen ALU basınçlı hava tankı (kod 09.112) çelik yerine. * Smartboard kumanda kutusu, treyler üzerinde bilgi aracı olarak monte edilmiş ve basınç sensörleri ile toplam dingil yükünü ekranda gösterecek şekilde ayarlanmıştır. Gösterge, ya kumanda kutusu üzerinden ya da EBS hava süspansiyon sistemiyle (üreticiye bağlı olarak) kamyondan izlenebilir. * SP-Kombi-Paket: Takım kutusu, 45° köşeli galvanizli çelik sacdan imal, ek olarak RAL 9006 beyaz alüminyum toz boya kaplama, platformda monte B=2.480 x Y=500 mm üst kapaklı, yan kapaklı ve eğimli, alüminyum yan duvarlar aşağı katlanabilir (500 mm yüksek), alüminyum arka duvar 150 mm yüksekliğinde çıkartılabilir, iç ve dış alüminyum yan paneller RAL 9006 beyaz alüminyum boya kaplı. Dahil: Katlanabilir ve çıkarılabilir arka dikmeler, galvanizli (boyasız). Vidalanmış ön yapı dâhil. Ön kiriştan kröpfung’a uzunluk: 3.935 mm; kröpfung ölçüsü 2.450 mm veya 2.750 mm’de öne doğru döndürme yarıçapı: yaklaşık 1.750 veya 1.480 mm. * Ön kirişte gömme 2 adet konteyner kilidi bulunur * Sadel platformun altında 3 adet yerleştirme şaftı, tercihe göre alüminyum rampa veya jant kovuk kapama için tahta tutmak için * Katlanır/uzatılabilir konsollar (galvanizli) ve genişletme için ahşap çıtalar dâhil (arka eğim hariç), çıta tutucu platformda (yükün maksimum genişliği 2.500 mm) * Ön ve arka uyarı paketli ikinci LED pozisyon lambası (Çift aydınlatma), sadece uyarı paketiyle birlikte * Treylerin arka tarafında 2 adet LED geri vites farı, geri vitesle etkinleşir (12 V ve 24 V’a uygun), maksimum 2 adet ek olarak kullanılabilir * Arka tarafta 7 pinli priz, fazla uzunluk aydınlatması için (arka lamba 58 R) ve şasi ucu için * Rampaların iç çıtasında, sol ve sağ yükleme eğiminde (yaklaşık 860 mm uzunluğunda) lastik kaplama şeritler, tek parça rampada iç çıta üzerinde lastik kaplama * Otomatik merkezi yağlama sistemi, pompalı (24V), gres tankı ve entegre treyler kontrolü ile - rampalar hariç (direksiyonlu araçlarda platform dağıtıcısına bağlantı dâhil) Not: Sadece 24V aydınlatma sistemli çekici araçlarda kullanılabilir! Ara satışı ve hata yapma hakkı saklıdır! Satış yalnızca genel satış şartlarımız (AGB) ile yapılır Önemli Bilgilendirme: Tüm detaylar dikkatlice kontrol edilmekle birlikte, bazen sistemler arası aktarım hatalarından dolayı yanlış bilgi oluşabilmektedir. Bu nedenle, tüm bilgiler taahhüt niteliği taşımamakta olup hukuki bağlayıcılığı yoktur. Yasal Uyarı: Bu ilan, BGB’nin 145. maddesi anlamında bir teklif değildir. Sadece sözleşme öncesi bilgi içermektedir ve verilen detaylar garanti edilmemektedir, taahhüt edilmiş özellikler değildir.

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting Podpfx Aletpta Dsdjgn * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Drawbar adjustable in height by approx. 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * JOST mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of the chassis Psdpfxjl Th Hto Aldsgn * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking locations and 2 on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Steel pallet 3-way tipper body with continuous side walls reinforced on top with inner tubing – without central stanchions, foldable with drop side spring assist * Removable bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be pivoted and locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with the wing doors open * 4 mm steel floor plate made of fine-grain steel * Mounting rail at rear for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner and 4 x 3 t recessed lashing eyes per side in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps integrated underneath cargo area in the chassis, accessible from the rear ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports galvanised * Axles, springs, air tank and landing gear painted in a shade of black * Sideboards painted RAL 9010 pure white * Other RAL colours for the sidewalls available at additional cost ----Information: * Reinforced body with load securing certificate * Vehicle has a one-day registration (not in use) * Subject to prior sale and errors excepted ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right front side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking latches and 2 hooks on the front wall ----Chassis: Pgjdpfxsl Th Duj Aldsn * Chassis made from fine grain steel ----Tipping Platform: * Steel pallet tri-side tipper body with continuous side walls and internal tube reinforcement—without central stanchions, folding with drop side spring assist * Rear stanchions bolted * Combination steel swing doors at the rear, asymmetric 2-leaf design—swivels and lockable up to 270°, not foldable—with additional pendulum frame for automatic rear door opening during tipping, locking via galvanized rotary bolt lock and central locking, deactivation function for automatic rear door when tipping backwards with swing door open * 4 mm fine-grain steel floor plate * Rear ramp holder rails ----Load Securing: * One 5 t lash ring in each corner, plus four 3 t lashing eyes per side recessed in the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the platform at the rear of the chassis for the ramps ----Tyres: * Tyres: 285/70 R19.5 ----Coating: * Chassis, drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing leg painted in a black shade * Sideboard coating in RAL 9010 pure white * Side wall coating in other RAL colors available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to prior sale and errors excepted ----Delivery Time: Immediately available ex Egestorf