Kullanılmış Renders Çalışma Platformlu Römork satın al (19.076)

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye Godpfx Aopk D Dqea Nsbl ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: ikinci el, azami yük ağırlığı: 29.200 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2007, yükleme alanı uzunluğu: 13.470 mm, yükleme alanı genişliği: 2.470 mm, Donanım: ABS, Foedisch FOEAPL13.6 Platform trailer Payload: 29,200 kg Gbsdpsu Ddldefx Aa Njl Tyres: 385/65 R 22.5 Lifting axle: 1st axle Trailer length: 13,800 mm Loading area (L x W): 13,470 x 2,470 mm Loading height: approx. 1,400 mm

Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane Mega Lowliner Chassis Welded construction with crossmembers, made entirely of high-quality steel Neck height = approx. 220 mm including fifth wheel plate Equipped with all necessary chassis reinforcements and cross braces Axles 2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes ABS: 1 axle with sensor Gbedpfon Hrtgjx Aa Nol Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset Lighting system 24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring: 2x2 LED three-chamber tail lights 1x reversing LED spotlight 1x LED fog light LED side marker lights Lane indicator lights Number plate lighting 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Floor Galvanized grating in the lowbed area Steel chequer plate at axle area Load securing Outer frame with D30 mm lashing hole profile on the slope 2x12 lashing points (8,000 daN) in the outer frame 3x rows of combi-stake pockets (80x80 mm) in the lowbed Accessories 2x wheel chocks with bracket Spare wheel carrier with winch 2x toolboxes with sliding drawer (for chain storage) Surface protection Steel construction: shot-blasted and primed Paintwork Chassis/frame/subframe: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: black KTL-coated Rims: Alcoa Dura-Bright aluminum With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% working capacity to the front For further information, we are happy to assist you.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.820 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.284 mm, Üretim yılı: 2026, Donanım: ABS, Vehicle Information - Load compartment length: 13,820 mm - Height: 3,284 mm - Width: 2,550 mm - Internal load compartment length: 13,620 mm - Internal load compartment width: 2,480 mm - Fifth wheel height: 1,150 mm - Permissible gross weight: 36,000 kg - Unladen weight: 6,530 kg - Container locks suitable for carrying the following containers: - 1 x 40', 2 x 20', and 1 x 20' centrally positioned up to 25t ----- Axles - Krone axles with disc brakes - 1st axle: lift axle - Air suspension - Chocks - Hub odometer - Tire brand (as per manufacturer’s choice): 385/65 R22.5 - KRONE TPMS control unit - EBS - Steel rims - KRONE air-suspended assembly + trailing steering axle ----- Superstructure / Attachments - Mechanical landing legs - Steel front wall with reinforced corner stanchions, 2,000 mm high - Interior front wall reinforced with 9 mm panel - 2 warning signs - 2 sets of oversize load signs incl. contour lights - Closed pallet storage box for 24 Euro pallets - Side stanchion depot, left and right, for 6 plug-in stanchions - Forklift holder - Retractable underrun protection - KRONE Telematics KSC ProPlus Dry 2 - Max. 7,000 kg forklift axle load - 30 mm thick, waterproof plywood floor ----- Lighting / Electrics - LED side marker lights with direction indicator Gbsdpfxev E Tpds Aa Njl - Amber beacon incl. pole mounting - Multi-function rear lights (full LED), Hella (Gen.2) - 2x LED license plate lights ----- Paintwork - Chassis: jet black – RAL 9005 - Axle hub: jet black – RAL 9005 - Front wall: light grey – RAL 7035 - Rims: natural silver

Koşul: yeni, azami yük ağırlığı: 37.363 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer SPS Maxima Heavy-Duty Platform Semi-Trailer TECHNICAL INFORMATION: * Fifth wheel height: 1,150 mm * Platform length: 13,600 mm * Gooseneck height: 180 mm * Platform height (laden): 1,300 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,540 mm * Gross technical weight (80 km/h): 45,000 kg * Gross technical weight (60 km/h): 46,000 kg * Unladen weight: 7,637 kg RUNNING GEAR: * BPW axles with air suspension and disc brakes * Air suspension including load gauge * 1st axle liftable * Wabco braking system * Tyres: 385/65R22.5 CHASSIS: * High-quality, high-strength S700 MC steel chassis * 30 mm hardwood floor * Jost landing gears CARGO SECURING: * Lashing rings * Stake pockets Gbsdpfx Aaei Rtfae Njl * Removable stanchions * Container locks * Front wall made of steel material, 1,500 mm ACCESSORIES: * 1x PVC-coated steel toolbox, 1,500 mm x 480 mm x 450 mm * Stake storage at the front wall * Steel side underrun protection Colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Krone SDP 27 platform semi-trailer (example images) * Fifth wheel height: 1,150 mm * Multilock external frame with universal load securing options every 100 mm * Pallet box for 24 Euro pallets * 10 pairs of post pockets in the external frame * 10 post pockets centrally in the floor * 12 plug-in stakes, 1,950 mm * 4 pairs of ferry lashing rings * Container locks for 1x40', 2x20', and 1x20' centered up to 25 tons * Two mechanical landing gears * Krone axles with air suspension and disc brakes * Wheelbase: 1,310 mm * Air suspension with lifting and lowering function, including automatic ride height reset * Fully automatic, load-dependent electronic lift axle control for one axle * Axle cap mileage counter Gedpfx Asvw Hmaoa Nsbl * 6x 385/65 R 22.5 tires * Spare wheel holder in basket design * Wabco braking system * LED lighting * Multifunctional taillights * 1 reversing light * Plastic toolbox * 2 sets of oversize transport signs, including marker lights * Stake depot on left and right side * 30 mm thick, water-resistant plywood floor * Steel front wall, 2,000 mm high * Steel parts blasted, KTL primed and powder-coated * Chassis including external frame in RAL 9005 deep black * Axles including wheel hubs in RAL 9005 deep black For further information, please do not hesitate to contact us.

Koşul: yeni, azami yük ağırlığı: 35.442 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 16.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.350 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Maxima extendable tele HD platform semi-trailer Immediately Available TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * External length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 9,100 mm * Platform extension: approx. 7,450 mm * Extension locking position: 500 mm * Gooseneck height: 180 mm * Wheelbase: 8,130 mm * Axle spacing between 1st and 2nd axle: 1,360 mm Gbodslz Hlijpfx Aa Nsl * Axle spacing between 2nd and 3rd axle: 1,810 mm * Axle load: 9 tonnes Technical load capacity * Axle load: 27,000 kg * King pin capacity: 18,000 kg technical king pin capacity * Overall width: 2,540 mm * Gross vehicle weight (GVW) technical max [80 km/h]: 45,000 kg * Gross vehicle weight (GVW) technical max [60 km/h]: 46,000 kg * Unladen weight ±3%: approx. 9,558 kg * Rear swing door: 2,450 mm CHASSIS: * Number of axles: 3 pcs * BPW axles with air suspension and disc brakes * First two axles fixed; rear axle steerable * Air suspension including 1 load gauge * Manual, overload-sensitive 1st axle lift system * Wabco EBS 4S/3M braking system * Electro-pneumatic dual-circuit ABS system * 24V lighting system with 2 x 7-pin and 1 x 15-pin sockets * Tyres: 6 x 385/65 R 22.5 FRAME: * Chassis manufactured from high-quality, high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega-profile reinforced, 30 mm hardwood floor * 2" king pin with bolted coupling * Mechanical landing gear front telescopic support winch, 50 tonnes static capacity LOAD SECURING: * Lashing rings * Stake pockets * Plug-in stanchions * Container locks suitable for 1 x 20 ft., 2 x 20 ft., 1 x 40 ft., and 1 x 45 ft. containers * Steel front wall, 1,500+500 mm height with Code-XL certificate ACCESSORIES: * 1 stainless steel toolbox, dimensions 1,000 mm x 500 mm x 500 mm (W x D x H) * Standard access ladder * Steel side underrun protection, compliant with Directive 89/297/EEC * Stake box, 6 units, mounted to the front bulkhead * 2 pairs of oversize load signs with LED lighting * Rotating beacon COLOUR: * Frame colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: ikinci el, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Welcome to Johanning’s Nutzfahrzeuge, your specialist for nearly new and exclusive used vehicles. AVAILABLE IMMEDIATELY! Delivery & financing possible. Location: 39606 Osterburg • Brand: Wilken Oldenburg • Semi-trailer • 3 axles • New TÜV (inspection) until December 2025 • Tyres approx. 70% • 3rd axle steering and lift • Drop-down sidewalls Johanning’s Nutzfahrzeuge, your partner for exclusive and nearly new used vehicles. Gjdpevmlbnofx Aa Njbl Our services – your advantages: (after-sale) – Trade-in of your vehicle possible (any condition) – Immediate and free deregistration of your vehicle – Registration service for €150 (incl. fees and plates) – Temporary registration – Viewings and test drives available anytime by appointment – Free delivery by arrangement possible Errors and prior sale excepted.

Koşul: ikinci el, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 09/1996, Üretim yılı: 1996, Donanım: vinç, * Teknik Bilgiler. Gbodpfxjxzw Hzo Aa Nsl * Adı: DENKA LIFT MK 25 *Clemens AB 25 metre Çalışma yüksekliği: 25,00 m / 200 kg Sepet taşıma kapasitesi: 200 kg / 2 kişi Dönüş açısı: 360° sonsuz Erişim mesafesi: 11,40 m / 80 kg Erişim mesafesi: 9,00 m / 200 kg Ağırlık: 2.450 kg Çalışma platformu: 0,70 x 1,40 m Geçiş genişliği: 1,69 m Geçiş yüksekliği: 2,11 m Toplam uzunluk: 9,07 m Minimum toplam uzunluk: 8,30 m * Destek ayak kare alanı: 3,90 x 3,90 m * Donanım - Dahili otomatik şarj cihazlı 24 V akü tahriki - Hidrolik hızlı denge ayakları - Alt şasede ikinci kontrol paneli - Sepette 230 V priz ve alet rafı - Döner sepete sahip mafsallı kol - Manuel acil durum çalışması - Destek ayakları ve aşırı yük için güvenlik izleme - Kademesiz oransal kumanda * Çalışma saatleri: Pazartesi–Cuma 07:30–12:00, 13:00–18:00, Cumartesi 07:30–17:00. * E-posta: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber İngilizce: Mladen Ilic

Koşul: ikinci el, azami yük ağırlığı: 15.150 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1994, ? Balast ağırlıkları için platform ? 50 mm çeki halkası ? 4 x sabitleme halkası ? Kampanalı fren Gbodpfjw Sqiljx Aa Nol ? Yaprak yay süspansiyonu ? Destek ayakları ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 7.200 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/2008, ? Platform for ballast weights ? 40 mm towing eye ? 9 lashing eyes ? Drum brake ? Leaf spring suspension Gbodpfx Aaswfku Ae Nsl ? Support legs ? BPW axles All information is provided without guarantee / Subject to prior sale.

Koşul: ikinci el, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2015, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, Schmitz Cargobull S01 platform treyler, kaldırılabilir aks ve SAF akslar Sorgular için dahili numara: 1225958 * ABS * EBS * 3 adet havalı süspansiyonlu aks * Kaldırılabilir aks * Disk frenler * SAF akslar Yükleme alanı uzunluğu: Uzunluk: 13.600 mm * Genişlik: 2.520 mm Lastikler: 1. aks: 385 / 55 R 19,5 %30, havalı süspansiyon / kaldırılabilir aks 2. aks: 385 / 55 R 19,5 %30, havalı süspansiyon 3. aks: 385 / 55 R 19,5 %30, havalı süspansiyon Gbedpfx Ajyavigja Nsl ----Fiyat: 3.900,- EUR + %19 KDV Daha fazla bilgi için aşağıdaki telefon numaralarından bize ulaşabilirsiniz: * Konuşulan diller: Almanca, İngilizce, Fransızca, Lehçe ve ???? Yazım hataları, yanlışlıklar ve ara satış hakkı saklıdır.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2021, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 890 mm, Üretim yılı: 2021, Donanım: ABS, lfd 12183 JUMBO PLATFORM MEGA TRAILER FELLECHNER 3-axle SP32 -G39 JUMBO /SAF / LIFT/ CONTAINER Manufacturer: KÄSSBOHRER First registration: 07.2021 Gbedpfxjwyg Nre Aa Nol Dimensions: 13,620 x 2,480 x 890 mm Gross permitted weight: 36,000 kg Unladen weight: 6,725 kg Fifth wheel load: 12,000 kg Air suspension lift/lower function Drum brakes Spare wheel holder ABS EBS AGS Axle manufacturer: SAF drum Lifting axle Phenolic plywood floor Lashing rings Toolbox Superstructure paint: green Chassis paint: green Tyres: 12 units Tyre tread depth: 5–10 mm Rear axle tyres: 245/70 R17.5; Load area dimensions: rear 9,300 mm / front 4,400 mm Multilock outer frame 15 + 2 x 7-pin socket / (lighting) Including container locks for BDF or 20 ft containers: 1 x 20 ft / 2 x 20 ft / 1 x 40 ft 40 ft container (empty) incl. adapter (height) Dimensions: standard 940 mm ASH = 990 mm LIFT AXLE Only 123,000 km All information without guarantee, subject to prior sale! If you have any questions regarding this or other vehicles, please call us. If you have any questions for this or another trailer/car please call us.

Koşul: yeni, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Üretim yılı: 2025, Donanım: ABS, You can find our full vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Load platform with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected within the extendable beams and automatically adapt to the respective load area length (except for supply of the first locking point) * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4x2, 6x2, and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve Gedpoxc Axxefx Aa Nsbl * 275/70 R 22.5 3PMSF twin tires, brand of our choice * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations control. Without installation of supply connections on the tractor unit * 4 pairs of recessed lashing rings on the gooseneck’s outer frame, foldable outward * At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets recessed in the gooseneck’s outer frame, for insertable stanchions approx. 100 x 50 mm * 1 crosswise stake pocket rail in the gooseneck floor, for insertable stanchions approx. 100 x 50 mm. 1 additional at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm wooden floor enclosed in ALU-omega profiles on the gooseneck and load platform * 10 pairs of recessed lashing rings laid flat in the outer frame of the load platform, foldable outward: - In front of the last axle and on the rear cross member of the trailer, one pair of lashing rings each (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets recessed in the outer frame of the load area, for stanchions approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left in direction of travel * Remote steering from front and rear via cable remote control, with axle tracking control, without installation in the tractor unit * Front wall made of steel, approx. 1,800 mm high, certified according to EN12642 : 2016 XL * Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on the left and right at the landing legs, wired to the connector to the tractor unit * 3 crosswise stake pocket rails mounted in the load floor for insertable stanchions approx. 100 x 50 mm * 1 additional hook-in intermediate table, approx. 500 mm wide, for the telescopic tube with large cross section, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the left in direction of travel * WADER container pockets in the loading platform for transporting: 1x 20' container in the load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Koşul: ikinci el, azami yük ağırlığı: 12.100 kg, toplam ağırlık: 16.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2011, yükleme alanı uzunluğu: 7.400 mm, yükleme alanı genişliği: 2.500 mm, Donanım: ABS, * ABS (Anti-lock Braking System) * Rotating beacon, orange * Duomatic air coupling * 5-chamber rear lights * Front landing gear * BPW ECO axles Gbsdpfx Aasvy Nw To Nel ----Body: Open platform (loading height approx. 950 mm), hardwood floor, rear extendable by 1,685 mm, 4 pairs of extendable container locks (twist locks), stainless steel storage boxes. Sale only to businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions are our terms and conditions (see imprint for details).

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear Gjdpol Tlhrjfx Aa Nebl * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 63.960 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Godpfx Aaswx Dcaj Nsbl Excerpt from the equipment. Full equipment details available upon request. Chassis: * Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch king pin Underride protection: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing gear: * Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centered 10-hole wheel mounting, offset 0 * Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function Steering: * 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system * Centralized external grease points Axle lift: * First and second axles automatically liftable, with additional cutoff on the chassis Brake system: * Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M * Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck * Aluminum air reservoir Tyres: * 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice TPMS: * Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit Mudguards: * According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t) * 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t) * 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t) Stake pockets: * 10 pairs of stake pockets inset in the outer frame * 6 pairs of stake pockets inset in the floor (on outer longitudinal beam) Removable stakes: * 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: * On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm Front wall: * Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate Floor: * Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lamps * Front white LED position lamps * Rear LED outline marker lamps * License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member Equipment: * Two wheel chocks with holders * Warning panel according to ECE 70 * Work light on lamp carrier (activated by reverse gear) * Bracket for rotating beacon at rear (including beacon) * 1 fixed access ladder on each side, including plug-in step assistance * Smart Board * Vehicle swing-out warning sticker & load center of gravity label Paintwork: * Chassis and front wall sandblasted and finished with high-quality coating * Chassis: hot-dip galvanized + RAL color of your choice * Front wall: RAL color of your choice * Front wall corner posts: ho

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm Gbsdpsrczm Djfx Aa Njl * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Koşul: yeni, azami yük ağırlığı: 2.110 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.050 mm, yükleme alanı genişliği: 1.550 mm, yükleme alanı yüksekliği: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: Multiplex wood floor * Recessed lashing points in the load floor * Side walls: Steel * Frame: Welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel standard * Walk-on steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm plus vehicle registration document/CoC certificate €39.00 All prices include VAT. Illustrations may differ from standard specification; technical modifications (e.g. tyre sizes) reserved. Delivery: Delivery by freight forwarder possible, €1.50 per transport kilometre one-way nationwide (from Seesen to destination), minimum charge €270 plus VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also obtain your custom trailer and accessories by arrangement here: BLYSS transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Gbjdpfx Aethlrhoa Nel Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. ?FINANCING OR LEASING AVAILABLE* Vehicle number (for customer enquiries) Illustrations may differ from standard configuration; technical modifications (e.g. tyre sizes) reserved.

Koşul: yeni, azami yük ağırlığı: 37.581 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Mega Tele HD platform trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension locking positions: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tonnes - Overall width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg Gbjdpfx Aaotn Hlme Nol - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x rigid front axles, 1x rear trailing steering axle - Air suspension incl. load gauge - Wabco braking system - Tyres: 12 x 245/70 R17.5 CHASSIS: - High-quality, high-strength S700 MC steel chassis - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear support winch with 50 tonne capacity - Mechanically folding rear supports with 45 tonne capacity - Wheel recesses: 420 mm deep, 800 mm wide, suitable for tyre diameters up to 1,800 mm RAMP: - Mountings for ramps at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft or 1x45 ft containers + 4 twist locks - Steel front wall, height 1,500 mm, with Code XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box with space for 18 stakes - 1x beacon - Bridge for wheel recesses to cover the recesses - Ramp box Chassis colour: Novagrau (New Grey) For further information, feel free to contact us.

Koşul: yeni, azami yük ağırlığı: 36.565 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.040 mm, Üretim yılı: 2025, Donanım: ABS, Brand-new Kässbohrer SPS Mega Heavy Duty Platform Trailer Immediately Available! Technical Specifications: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross technical weight [80 km/h]: 45,000 kg * Gross technical weight [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45/R 19.5 Frame: * High-strength chassis constructed from S700 MC steel in accordance with ISO 1726 * 2 mm Omega-profile, reinforced with 30 mm hardwood floor * 8x2 units of extendable side extensions up to 300 mm * Landing gear at the front, folding supports at the rear Ramp: * Ramp holders at the rear of the vehicle * Rear ramp storage box Load Securing: * Lashing rings * Stakes pockets Gjdporukt Rsfx Aa Nsbl * 6 x 2 units container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 units container locks * Steel front wall, height 1,500 mm, with Code-XL certificate Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: yeni, azami yük ağırlığı: 37.581 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Mega Tele HD platform trailer with wheel recesses TECHNICAL INFORMATION: * Fifth-wheel height: 950 mm * Overall length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 8,950 mm * Extension: 6,900 mm * Extension locking positions: 500 mm * Gooseneck height: 120 mm * Platform height (loaded): 1,040 mm * Wheelbase: 7,700 mm * Axle load: 10 tonnes * Overall width: 2,550 mm * Technical gross weight (80 km/h): 48,000 kg * Technical gross weight (60 km/h): 50,000 kg * Unladen weight: 10,419 kg RUNNING GEAR: * BPW axles with air suspension and drum brakes * 2x fixed axles at the front, 1x self-steering axle at the rear * Air suspension including load gauge * Wabco braking system * Tyres: 12 pieces 245/70 R17.5 CHASSIS: * Chassis made of high-quality, high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions, extendable up to 300 mm * Telescopic support winch at the rear with 50 tonne capacity * Mechanically folding supports at the rear with 45 tonne capacity * Wheel recesses measuring 420 mm deep, 800 mm wide, suitable for tyre diameters up to max 1,800 mm RAMP: * Ramp mounts at the rear of the vehicle LOAD SECURING: * Lashing rings * Stake pockets * Stakes * Container locks suitable for 1x20 ft, 1x40 ft or 1x45 ft + 4 twist locks * Front wall made of steel, 1,500 mm high with Code-XL certificate ACCESSORIES: * 1x plastic toolbox * Stake box with space for 18 stakes * 1x beacon * Wheel recess cover bridges for closing the wheel recesses Chassis colour: RAL 3020 traffic red For further information, we are at your disposal. Gsdpsmtwypefx Aa Nobl

Koşul: yeni, azami yük ağırlığı: 56.570 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle stock with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Chassis frame construction made of welded longitudinal beams and inserted cross members * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the main beams * Maximum cross member spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing legs: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brake * 22.5 single tires * Axle spacings approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity, lifting and lowering device with 1 rotary valve Knorr/Wabco * Mounting bracket for lifting and lowering device, bolted version Brakes: * Smartboard/TIM/Infocenter on the holder for lifting and lowering, in addition to the lifting and lowering valve, without battery (can only be operated with the towing vehicle) Gbedswx Dctopfx Aa Nsl * Holder for lights and brakes at the front of the underrun nose, total height approx. 700 mm * Tire pressure monitoring basic version, connected to the EBS CAN bus system * With dual release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device installed at the rear left in driving direction * EBS brake system by Wabco, EBS diagnostics via CAN bus (EBS connector), no external diagnostic cable provided!! Tyres: * 8 x 445/65 R 22.5 – branded manufacturer of our choice * Hub centering Lubrication: * Grease nipple strips on the bogies and at the front on the steering. No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lamps on top of the front wall (rear-facing), switch on lifting/lowering control bracket * Robust front wall for platform body * Contour markings side yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lamps, installed in the lamp plate, switched via reverse gear * 2x LED work lamps, switched via reverse gear, 1x per side near landing gear * 2x LED reversing lights per side, 1 mounted before the 1st axle * Lighting/wiring system by manufacturer of our choice * Number plate lighting * The towing vehicle must provide adequate power for the chosen lighting (esp. reversing lights) * Position lights front, bottom, white, 1 each right and left (LED) * 24 volt lighting system with large multifunction lamp * Side marker lights (LED) flashing * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair of lane departure warning lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL color of choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD SLP lashing points per side w

Koşul: ikinci el, azami yük ağırlığı: 32.880 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, Donanım: ABS, Schmitz Cargobull SPL 24/L-13.62EB Flatbed Trailer * Flatbed semi-trailer * Front wall height 1,200 mm * 12 container locks / twist locks for 1 x 40ft, 2 x 20ft, and 1 x 20ft containers * Continuous lashing holes in the outer frame * 4 retractable warning signs with position lighting * Main beam height: front 156mm, rear 428+28mm, Smart Generation Gbsdpfot Dhfmjx Aa Nsl * Premium distributor with 3 sockets: 2 x 7-pin DIN ISO3731 + DIN ISO1185 + ISO12098 * 8 stake pockets (ATZ type) centrally in the 8t floor, for stakes 70/70 * 8 pairs of additional stake pockets with stake securing in the outer frame for stakes 70/70 * Strength per additional stake: up to 400 kg at 1 meter height * 1 row of 70x70 stake pockets, transverse for load securing, approx. 2,600 mm from front wall * Open top storage box for additional stakes * 16 pairs of lashing rings, each with 4t tensile force, according to EN 12640 * 28mm board floor, max. 8,000 kg forklift axle load, strength tested according to DIN EN 283 * Air suspension * Pneumatic controls * Lift axle * Disc brakes Subject to prior sale and errors! Sale strictly according to our General Terms and Conditions. Important Note: Despite careful examination of all details in our offer, errors may occur. Some of these may be caused by transmission errors from various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Instead, it is information for the initiation of a contract. The details provided here are without guarantee and do not constitute warranted characteristics.

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t Gjdpfx Asl Th Nrea Nebl ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf