Kullanılmış Broshuis Çalışma Platformlu Yarı Römork satın al (21.548)

Koşul: yeni, azami yük ağırlığı: 16.180 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specifications. Full specifications available upon request. Chassis: * Steel welded construction made from welded longitudinal beams and inserted Z-crossmembers, closely spaced crossmembers for high floor load capacity * Ramp storage: Two insertion pockets for each one loading ramp located between the longitudinal beams behind the axle assembly below the loading floor, with cover plate in the rear end frame Underrun protection: * According to EU regulations Landing legs: * Front: Landing legs operable from one side * Rear support: Two adjustable drop-down legs Axles: * 2 x 10 t air suspension axle assembly, SAF brand, drum brakes approx. 300 x 200 mm, center-location for twin tyres, ABS, total air suspension travel approx. 200 mm (comprising approx. 140 mm lift and 60 mm lowering), control via lever with detent function Tyres: * 8-fold, 235/75 R17.5 – make at our discretion, mounted on 6.75x17.5 rims with offset Mudguards: * PVC, fitted in front of and behind the axles according to EU specifications Load securing: * Perimeter frame with tie-down points approx. every 150 mm for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t each * Stake pockets for removable stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Braking system: * Pneumatic braking system in accordance with EU requirements with EBS * Two spirals for connection to the tractor unit, with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting: * Lighting system according to EU standard, 24 Volt, multi-chamber tail lights, license plate lights, side marker lights and lane marker lights at the rear, connector plate on the left at the towing bar, incl. connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with brackets * Detachable rotating beacon at the rear * 40 mm towing device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. every 200 mm * Mechanically adjustable fixed drawbar, 6 x approx. 100 mm increments, with bolted 50 mm towing eye according to DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Extendable container locks for 1 x 20', extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest industry standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL 9011 graphite black * Outer frame: Hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black Iodey Auf Topfx Ab Tjtg

Koşul: ikinci el, boş ağırlık: 5.870 kg, azami yük ağırlığı: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, süspansiyon: hidrolik, lastik durumu: 70 yüzde, yük kapasitesi: 36.130 kg, • 1. dingil kaldırılabilir • Omega çelik zemin • Yük sabitleme halkaları Itodpfoy Abrmsx Ab Tjg • Yedek tekerlek taşıyıcısı • Depolama kutuları

Koşul: yeni gibi (sergi parçası), makine/araç numarası: AHW MT3080, toplam ağırlık: 3.000 kg, yükleme alanı uzunluğu: 3.080 mm, yükleme alanı genişliği: 1.520 mm, ANHÄNGERWIRTZ – the online pick-up market for your new trailer offers top brand trailers ready for immediate collection! - Over 850 new trailers in stock - Over 100 used trailers constantly available - Over 150 vehicle transporters in popular versions with extensive accessories in stock Non-binding example: Display trailer ready for collection Brenderup Machine Transporter MT 3080 GD 308x152cm 3000kg, low-loader tandem axle with V-drawbar, tailgate ramp with support leg 13-pin plastic connector, 14-inch tires Jockey wheel, 6 internal lashing eyes / 400 daN Itsdpfeyrbnfox Ab Tjg Excavator bucket holder Non-slip fender covering and step plate Hot-dip galvanized, high-quality, robust phenolic plywood floor Heavy-duty metal wheel chocks, position lighting Recessed lights Spare wheel including holder under bucket tray The largest selection of immediately available transporters Sales & telephone ordering during business hours or 24/7 via our trailer shop Images and description of this advertisement are protected by copyright – Logos are protected by trademark law 03/26 39033

Koşul: ikinci el, azami yük ağırlığı: 17.520 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 9.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.720 mm, Donanım: ABS, 3-Axle Zikun ZK-AD3-PRXX Flatbed Container Trailer VIN: Z04127 Chassis / Attachments: * Air suspension with lifting and lowering function * Lift axle * 3 x SAF axles with disc brakes * Tires: 265/70 R19.5 * Tread depth remaining: Front ~60%, Center ~80%, Rear ~80% * Twin tires * 2 x PVC storage boxes * Storage basket on the left * Ride height approx. 1.10 m Superstructure: * Zikun flatbed * Side walls 600 mm high * Kinnegripp folding stanchions * Steel floor with checker plate * 5 x container locks per side * 8 x pockets for container locks per side * 14 x heavy-duty lashing rings per side * 6 x heavy-duty lashing rings recessed into the floor per side * Edscha sliding roof * Lashing points * Dimensions: 9,100 mm x 2,480 mm x 600 mm * 22 pallet spaces Weights: * Gross weight: 24,000 kg * Unladen weight: 6,480 kg * Payload: 17,520 kg Other: * 1 previous owner * New general inspection possible * Very good condition New vehicle inspections / safety checks or weight reductions/increases available upon request. We are happy to assist you in obtaining export/transit license plates. The transport of purchased vehicles within Germany is also possible. Contact us! Ijdpeyadu Refx Ab Tjtg ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or printing errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and pre-owned commercial vehicles. On 11,000 m², you will find a wide selection of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Short-term/export license plates We are happy to help you obtain export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronisches Bremssystem) * Notlöseeinrichtung für Federspeicherzylinder * Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich * Trommelbremsen * 4 x 11 t Gigant-Achsen * Luftfederung mit manueller Absenkung hinten * Warnzeichenpaket vorne & hinten * SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert * Reflektierendes Konturband seitlich und hinten * Abnehmbare LED-Rundumleuchte hinten * 15-poliger Stromstecker * LED-Schlussleuchten * Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung * Geschlossene Kunststoff-Einzelkotflügel vorne Itodpfx Abexmpyds Teg * Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung) * Seitlicher Unterfahrschutz * Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln * Fahrgestell aus hochfestem Feinkornstahl * Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz * Auffahrrampen: äußere Bohlen aus 50 mm Hartholz * Ladungssicherungspaket (Lasi-Paket): - 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform - Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen - Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen - An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück - Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t) * 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge) * Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert * Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm) * Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand * Mechanische Fallstützen hinten * Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm) * Hydraulischer Rampenverschub seitlich * Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm * Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge) * Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt * Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert * Bereifung: 235/75R17.5 * Fahrzeug ist feuerverzinkt * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Sofort verfügbar ab Egestorf

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners Iodpfsxptn Dox Ab Tjtg * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, toplam ağırlık: 2.100 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2021, toplam genişlik: 2.150 mm, toplam yükseklik: 2.330 mm, Donanım: vinç, Very well-maintained trailer-mounted work platform with a working height of 16 m, 200 kg basket load capacity, and a lateral outreach of 9.45 m, as well as a power supply to the basket including generator. The safety inspection (UVV) was carried out by Paus in March 2026. GT 16 AG Work Platform Working height: 16 m Telescopic design Lateral outreach: 9.45 m Basket load capacity: 200 kg Power supply: 220 V to the basket Includes generator Fully hydraulic outriggers Support width: 4.08 m Support length: 4.29 m Continuous rotation Overall length: 6.31 m Transport width: 2.15 m Transport height: 2.33 m Weight: 2,100 kg Financing available through our partner banks—we are happy to assist you. Please note that interim sale is expressly reserved, as this item is also advertised on other platforms. Accessory details are provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and offer an on-site inspection and testing to ensure that the buyer has an accurate understanding of the condition and suitability of the equipment. Inspections and testing are possible at any time by appointment and are expressly encouraged. Itsdpfxeyw Ergs Ab Teg

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector Ijdpfex Ipa Nox Ab Tetg * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: ikinci el, boş ağırlık: 10.680 kg, azami yük ağırlığı: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2020, toplam uzunluk: 20.500 mm, toplam yükseklik: 1.400 mm, süspansiyon: hava, yük kapasitesi: 42.320 kg, • 1. dingil kaldırılabilir • 3. dingil kendinden yönlendirmeli • Tabla genişliği 2,40 m • Platform yüksekliği 1,40 m • Platform uzunluğu 13,30 m • Uzatılabilir: 20,50 m’ye kadar • Saklama kutusu Isdpsx Hky Usfx Ab Tjtg • Uzun telli raf • Su deposu • Konvoy seti • 10 bağlama halkası • WABCO SmartBoard • Talep üzerine 20 adet alüminyum direk

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear Iedpfxol Th I Aj Ab Totg * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed Itodpfjl Tik Nex Ab Teg * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: ikinci el, azami yük ağırlığı: 21.320 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı yüksekliği: 800 mm, Üretim yılı: 2022,

Koşul: yeni, azami yük ağırlığı: 12.451 kg, toplam ağırlık: 16.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, Donanım: ABS, * Çekilebilir yükleme alanı * Knorr havalı fren sistemi Itsdpfx Aoyvnwisb Teg * 3 dingil davlumbazlı frenlerle * Ön ve arka kafes ----* Lastik ebatı: * Teknik toplam ağırlık: 16.000 kg * Boş ağırlık: 3.540 kg * Toplam uzunluk: ----Araç numarası: 11937----Hatalar ve ara satışlar saklıdır----Reklam ve çeşitli yazılar dijital olarak kaldırılmıştır. -----Bir araç satın alırken ortaya çıkan tüm işlemler için size memnuniyetle yardımcı oluruz – lütfen istek ve önerilerinizi bizimle paylaşın, sizin için ilgileniyoruz. Diğer hizmetlerimiz ise ek ücret karşılığında şunlardır:----Eski aracınızın takası, TÜV/SP muayenesi, komple ihracat işlemleri, finansman aracılığı, ihracat plakası başvurusu, araç transferi ve tescili, kurtarma ve araç taşımacılığı.----SİZİN VTS EKİBİNİZ

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: Iedpfx Absv D Tbkj Totg * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2018, yükleme alanı uzunluğu: 6.060 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 300 mm, Errors and prior sale excepted! Internal number: 1448. FEATURES * Platform trailer * 3 axles * Support wheel Itodpfxevwh U Sj Ab Tog * AL-KO coupling * Side planks all around ... and much more. ----The vehicle is in unrestored condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing is also possible without a down payment! Do you have any questions? We are happy to advise you!

Koşul: ikinci el, azami yük ağırlığı: 4.930 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 1.990 mm, toplam genişlik: 2.545 mm, toplam yükseklik: 2.850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 ----For equipment and condition, please refer to the photos. Itsdowtvvnspfx Ab Tjg ----The vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing possible even without a down payment! Do you have any questions? We are happy to advise you!

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/1998, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 850 mm, 2 Dingilli BlomenRöhr Platform Römork SDAH 8,5T İlk tescil: 06.1998 Üretici: BlomenRöhr Yaprak yay süspansiyon Lastik: 215/75 R17 Uzunluk: 6240 mm / Yükseklik: 2360 mm Muayenesiz (TÜV yok) Iedjv Ridhjpfx Ab Tstg Ekstra donanım, teknik veriler veya görseller talep üzerine sağlanabilir! Bilgiler taahhütsüzdür/hatalara açıktır! İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler teşkil etmez. Satıcı, hata, giriş ya da veri iletim hatalarından sorumlu değildir. Değişiklik hakkı saklıdır. Sürekli alım-satım ile takas ve kiralama yapılır Belediye teknolojisi ile kanal temizliği için atık yönetimi ve temizlik araçları, sıvı ve tehlikeli madde taşımacılığı

Koşul: ikinci el, toplam ağırlık: 2.000 kg, ilk tescil: 08/1995, Reklam brandaları için çerçeveli veya eşya taşımak için uygun römork Konum: Im Erlenkamp 15 Iodpoynvdmofx Ab Tjtg

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: Itodpfx Aoq Dyvyjb Tog * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) Itedpfxeq Dyv Io Ab Tsg * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection Itjdpfstplwiox Ab Tsg * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: ikinci el, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 09/1996, Üretim yılı: 1996, Donanım: vinç, * Teknik Bilgiler. * Adı: DENKA LIFT MK 25 *Clemens AB 25 metre Çalışma yüksekliği: 25,00 m / 200 kg Sepet taşıma kapasitesi: 200 kg / 2 kişi Dönüş açısı: 360° sonsuz Erişim mesafesi: 11,40 m / 80 kg Erişim mesafesi: 9,00 m / 200 kg Ağırlık: 2.450 kg Çalışma platformu: 0,70 x 1,40 m Geçiş genişliği: 1,69 m Geçiş yüksekliği: 2,11 m Toplam uzunluk: 9,07 m Minimum toplam uzunluk: 8,30 m * Destek ayak kare alanı: 3,90 x 3,90 m * Donanım - Dahili otomatik şarj cihazlı 24 V akü tahriki - Hidrolik hızlı denge ayakları - Alt şasede ikinci kontrol paneli - Sepette 230 V priz ve alet rafı - Döner sepete sahip mafsallı kol - Manuel acil durum çalışması Itedpfsxzw Hzox Ab Tsg - Destek ayakları ve aşırı yük için güvenlik izleme - Kademesiz oransal kumanda * Çalışma saatleri: Pazartesi–Cuma 07:30–12:00, 13:00–18:00, Cumartesi 07:30–17:00. * E-posta: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber İngilizce: Mladen Ilic

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: Itedpfxopk D Dqj Ab Teg * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: ikinci el, azami yük ağırlığı: 15.150 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1994, ? Balast ağırlıkları için platform ? 50 mm çeki halkası ? 4 x sabitleme halkası Itsdow Sqilepfx Ab Teg ? Kampanalı fren ? Yaprak yay süspansiyonu ? Destek ayakları ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 7.200 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/2008, ? Platform for ballast weights ? 40 mm towing eye ? 9 lashing eyes ? Drum brake ? Leaf spring suspension ? Support legs ? BPW axles Isdowfku Aopfx Ab Tetg All information is provided without guarantee / Subject to prior sale.