Kullanılmış Muller Mitteltal 3-Assige Dieplader Met Oprijrampen Machine / He... satın al (42.134)

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Closed individual plastic mudguards at the front * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear) * Chassis made of high-strength fine-grained steel * Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm hardwood * Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough * 11 pairs folding extensions for 3 m overall width (not on rear slope) * Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle Csdjxmpykopfx Aldsgt * Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp displacement * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: Cedpfxsxptn Do Aldsgt * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side Cgsdpfx Aljl Tihujdst * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Cedpfx Asxw T Uaoldegt

Koşul: ikinci el, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 8.650 mm, yükleme alanı genişliği: 2.480 mm, ? Mekanik rampalar ? Yükleme yüksekliği: yaklaşık 910 mm ? Stepne tutucu ? 40 mm çekme halkası ? Dönerek yanıp sönen uyarı lambası Codjyw Egwopfx Aldsgt ? Kampana frenler ? Yaprak yaylar ? 1 x saklama kutusu ? Çift lastik ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Cedpext Sl Nofx Aldjgt Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2004, Üretim yılı: 2004, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Csdpoxyx Haofx Aldogt

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, Üretim yılı: 2005, Donanım: ABS, - EBS Cgodpfx Aoxt Tf Roldet Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/1996, Üretim yılı: 1996, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Cgjdpsxt Sd Esfx Aldst

Koşul: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * BRAND NEW VEHICLE, no first registration Cjdpsyxbdbjfx Aldegt * Available mid/end of May '26 in RAL 7016 Anthracite Inquiry no.: 30504 * Gross weight: 11.9 t, Payload: 8.77 t * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * 6.27m x 2.47m x 0.4m laser-welded steel drop sides, foldable with 2 spring balancers * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) placed in front of the ramps with a storage bracket behind the front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000daN recessed in the perforated pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating, anti-slip design * Preparation in front of the front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing spotlights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing through our partners, with or without down payment or balloon payment, various terms available. Request an offer! ---- * Example hire purchase with our partner FM LeasingPartner: €475/month net for 60 months, no down payment, zero balloon. Other terms with/without down payment or final payment available. Request an offer! We are an official MüllerMitteltal dealer! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of office hours available by appointment * We speak German, English, Russian, Polish, and French.

Koşul: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene) - Toplam ağırlık: 18.000kg / 20.000kg Cgsdpfeyw Ep Ssx Aldjt - Boş ağırlık: 4.360kg - Taşıma kapasitesi: 13.640kg / 15.640kg Diğer bilgiler - Çift lastikli 235/75R17,5 - Gigant akslar - 4 çift yük sabitleme halkası - PNömatik kilitleme sistemi - Alçaltılabilir döner şasi - Yaklaşık 2.300mm'lik rampa, saklama bölmesinde - Arka destek ayağı - Ekipman dolabı - Alt koruma

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WMM000000L0066323, boş ağırlık: 2.980 kg, azami yük ağırlığı: 7.020 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, yükleme alanı uzunluğu: 5.350 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 800 mm, toplam uzunluk: 7.498 mm, toplam genişlik: 2.550 mm, lastik durumu: 95 yüzde, renk: beyaz, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, Yeni durumunda römork Garanti ve sorumluluk olmaksızın satış Hatalar ve ara satış hakkı saklıdır! Cgodsyt Igkjpfx Aldet Bu ilandaki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler olarak kabul edilmez. Satıcı, yazım hataları ve veri aktarımındaki eksikliklerden sorumluluk kabul etmez. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!

Koşul: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 30505 ---- Cgjdpfxjyvxg Io Aldet * Remote diagnostics with display option in truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofit of additional side panels * Lockable compartment under the tipping platform for loading ramps * Incl. 1 pair aluminum loading ramps 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN flush mounted and foldable in tipper floor (centered) * Hardwood excavator bucket rest * 2-step access in front of the front wall (hot-dip galvanized) * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stanchions screwed on, hot-dip galvanized * Extension cables for the rear drop side * Plastic toolbox on right side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at rear of trailer ---- * Hire purchase price: * e.g. €549 for 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request our offer! * We are Müller-Mitteltal dealers * Free delivery possible for timely orders! ----Our business hours: Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, appointments can be arranged. We speak German, English, Polish, and French. WhatsApp

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform Cgsdpfxel Tik Ne Aldot * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard on-board system for load weight determination * Warning panel packages at front & rear * Reflective contour marking tape on sides and rear * Removable rear rotating beacon * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side * Front: closed single fender in plastic * Rear: straight steel mudguards with spray suppression (spray mist reduction) * Side underrun protection * Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable * Chassis made of high-strength fine-grained steel * Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (no stakes present), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform * At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings at the excavator arm rest * 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope) * Widening planks for the left side stored in a compartment * Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm * Mechanical rear supports * Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm Cgodel Tphropfx Aldot * Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, includes manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, A7

Koşul: ikinci el, azami yük ağırlığı: 30.700 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2002, Donanım: ABS, * MüllerMitteltal alçak şasi 4 dingilli T40 * 2X yönlendirilebilir döner tabla aksı * Alman römorku * Direk * Hidrolik olarak yana kaydırılabilen rampalar (sol-sağ) * Katlanabilir, bölünmüş rampalar * Genişletilebilir * ABS * BPW akslar * 40 ton * Boş ağırlık: 9.300 kg * Dingil başına yük kapasitesi: 10 ton * Tam çalışır durumda Cgedpfsyuri Eex Aldot * Lastikler iyi durumda

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer Ref. for inquiries: 27963, available end of March 2026 NEW VEHICLE including COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports * Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm * Platform height approx. 910 mm loaded / approx. 940 mm unloaded * Load area: 7,000 mm with 400 mm high front wall * Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating, * Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation * Load securing package (La-Si-Paket): * 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members * 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame * 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN * Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Softwood (spruce/fir) floor, 50 mm thick * Gigant axles with air suspension including EBS 2S/2M * Lifting and lowering function * 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors * 1 plastic toolbox positioned in driving direction right, in front of the front wall * LED lighting system * 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground * 2 LED reversing lights at the rear Cgodpfx Asyuq R Usldet * Flashing side marker lights * Oversize load warning sign * 1 removable all-round LED beacon including holder and installation * Rear folding supports, front support foot with gear winch ---- Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value Other terms with/without down payment or residual value are possible! We are an authorized MüllerMitteltal dealer ---- * Our opening hours: * Mon-Thu: 08:00-17:00 * Fri: 08:00-15:00 * Outside these hours, we are available by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Koşul: ikinci el, boş ağırlık: 3.280 kg, azami yük ağırlığı: 14.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2013, süspansiyon: hava, lastik boyutu: 265/70 R19,5, dingil mesafesi: 5.030 mm, Donanım: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | BPW disc brakes | TÜV valid until | Subject to errors, input mistakes, and prior sale. Csdpfx Aewd Sdceldsgt

Koşul: ikinci el, azami yük ağırlığı: 10.960 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.500 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - Çelik - Sıcak daldırma galvanizli - Alüminyum yükleme rampaları - Rampa saklama bölmesi - 500 mm katlanabilir yan korkuluklar - Yan korkuluk yayları Cedpfx Asytma Aeldsgt - Gigant akslar - Lastik ebadı 285/70R19,5 - Yüksekliği ayarlanabilir çeki kolu - Ön ve arka destek ayağı - Plastik alet kutusu - Ön tırmanma basamağı

Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS * 5 odacıklı arka stop lambaları * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası Cgjdpfeyncyhox Aldjt ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders Cgedpfox Ipapex Aldst * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: Cedex Ipbaepfx Aldegt * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Koşul: ikinci el, azami yük ağırlığı: 32.120 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2009, Üretim yılı: 2009, Donanım: ABS, Schwarzmüller platform Lastikler yaklaşık %70 Cgjdpfx Aew N Uwusldst

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: Csdpjq Dyvyefx Aldegt * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and use as low loader ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-type cylinders * Drum brakes ----Axles: Cgedol Tld Iopfx Aldet * 2 × 10.5 t axles ----Suspension: * Air suspension with manual lowering at rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), indication in the truck via EBS signal (without truck-side installation) * LED tail lights 12/24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier in basket design on the right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact buffers * Folding A-plate at rear ----Loading area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * Transport of roll-off containers with container length from 5,500 mm to 7,000 mm possible * Pneumatic 4-way clamp locking and mechanical plug-in stop angles at the front of the guide rails * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 relocatable skip stops for lateral centring, front 4 skip stops are plugged in with tiltable stops * Weld bead as anti-slip coating in the drive-on ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips; 4 cloverleaf-style lashing cleats on each side * 1 pair of 13.4 t UVV lashing rings at the front * Each side fitted with 4 × 8 t lashing loops recessed in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair), 2,800 × 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Notes: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Perm. total weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer’s warranty * Errors and intermediate sale excepted ----Delivery time: * Immediately available from Egstorf