Kullanılmış Fliegl Hangler Holzrungen Auflieger Exte Rungen satın al (2.206)

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm incl. rear incline Further information plus preliminary freight / provision ex warehouse 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame with slight slope, new design with 'Load-Lock profile' for lashing strap attachment Pair of lashing eyes outside in the floor, each rated at 5t 1x at the front corners, 1x before and 1x in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5t Support jack at the front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear splash guards (not in combination with forklift holder) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Central axle trailer drawbar system Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA or BPW axles as per manufacturer’s selection, with tapered roller bearings and S-cam brake 'Axles/chassis laser-measured': reduces tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber mounting and mechanical axle load equalisation (rocker compensation) Brake system 2-line compressed air braking system Coloured line routing for easy service Hand spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, 24 volt ABS and ALB, ABS plug at front, with connecting cable, Note: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Wheels and Tyres 235/75 R17.5, brand as per manufacturer’s selection Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front in LED 2 white/red lane marker lights at rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable Floor Steel/chequer plate floor for high point loading capacity Note: slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front wall / front corner posts 25 mm aluminium hollow section, 400 mm high Dodpfx Afjyl E Dqovouu Side walls 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts Without centre posts Rear wall / rear corner posts 1 pair of steel posts fixed to the frame with bracket for securing loading ramps, entry width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (tip area with steel/chequer plate) with gas strut for single-person operation Operating notes The stated gross weight is technically feasible; depending on the load, the gross weight may not be achievable within the permitted axle, support, and kingpin loads. (Poor driving and tracking behaviour due to incorrect load distribution possible.) Country of Registration / Plates Germany with Dekra inspection and certificate (per §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape to ECE R 048, side white and rear red Painting Frame DB 7350 Novagrau Front wall aluminium Side wall aluminium anodized Loading ramps hot-dip galvanised

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Total weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: approx. 10,410mm total, gooseneck approx. 2,490mm, loading platform including rear incline approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information Plus pre-shipping / handling from stock location 26639 Wiesmoor: €1,280.00 net Hire purchase offer: Term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 759.00 Chassis, Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Dusdpfx Aevv D Ixsfveu Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for axles 1 and 2 with anti-splash mudflaps behind each axle, Anti-splash mudflaps before and after axles 3 and 4 Excavator arm recess over rear axles extending to rear, approx. 1,800mm long, approx. 650mm wide and approx. 150mm deep 2 pairs of lashing holes rated to 5t each, in the excavator arm recess on the side of the longitudinal frame approx. 300mm from the front and approx. 200mm before rear incline 1 lockable plastic toolbox, w=600 / h=425 / d=460mm Recessed storage box in the gooseneck with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not in the rear incline) (Note: track width of machines or vehicles to be transported must not exceed external frame width of 2,550mm) Storage compartment for timber planks under the low-bed area 70mm timber planks for widening to 3,000mm Low loader lashing points 1 pair of lashing recesses in the front longitudinal member within the gooseneck, each rated to 10t 4 pairs of lashing holes on the outer frame, rated to 5t each (for securing straps) 9 pairs of recessed lashing mushrooms (above and side of outer frame), each rated to 10t 2 x at the front on the gooseneck 7 x on the low-bed deck First lashing point 250mm from the front and last max. 250mm from the rear, distance between lashing points max. 1,100mm 3 additional pairs of folding lashing points, each rated to 10t 1 x on the gooseneck (protruding) 1 x at the start of the low-bed deck, recessed inside the longitudinal beams 1 x recessed in the floor behind the last axle Drawbar assembly, turntable trailer Drawbar with certified 50mm towing eye Drawbar height adjustment via spring Axles and Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels & tyres 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be appropriately pre-equipped, not installed in this trailer; not a calibrated scale) Vehicle stability control system 2 fail-safe coupling heads at the front, with connecting lines to tractor unit, 12-24 Volt EBS, electronic braking system with EBS plug at the front, including connection cable Knorr make Note: This trailer may only be towed by vehicles that guarantee effective ABS operation! Electrical system 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED number plate lighting, (Note: Certain tractor units may show fault codes even though functionality is correct) 2 white front position lights, LED 2 red/white lane marker ligh

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Dsdpfx Aowlmr Dsfveuu Chassis: low-bed trailer Steel welded construction Turntable with robust ball bearing race Foldable rear supports Wheel chocks with holder Full-width rear mudflaps 1 plastic toolbox Prepared for extensions to 3,000mm (holes in outer frame with covers, not in the rear taper) Tie-down eyes for low-bed 1 pair of lashing slots embedded in the front longitudinal member with cranking, each 10t 7 pairs of lashing pins, recessed in the top and sides of the outer frame, each 10t 1x at the front in the cranked area 5x in the low-bed 1x in the rear taper 12 pairs of lashing holes in the outer frame, each 5t (for tie-down straps) 5x cranked area, 6x low-bed, 1x rear taper Drawbar configuration – turntable trailer Drawbar with tested 40mm towing eye Drawbar height adjustable via spring Axles & suspension Drum brake axles (manufacturer’s choice) "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and tires 235/75 R 17.5" Manufacturer’s choice Steel rims, twin configuration, factory silver Braking system 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Connection lines extended by approx. 60cm Without ABS, but with mechanical load-sensing valve; maximum approval for 60km/h Electrics 12 Volt, multi-chamber taillights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red lane marker lights at rear 1x 7-pin 12V plug at front, with connection cable extended by approx. 60cm 1 LED beacon with holder, switched via parking lights (removable lamp) 2 pairs of warning boards, double, LED illuminated and extendable to 3,000mm Floor Cranked front area with steel/tread plate covering Storage box recessed in the drive-over slope towards the cranked section Then 70mm softwood floor, with steel/tread plate covering in wheel arch areas Rear taper with 70mm softwood floor Low-bed loading area incl. rear taper: 5,900mm Ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Wood-covered (tip area with steel/tread plate) Hydraulically operated, via tractor auxiliary drive with restrictor, controlled from left front side Hydraulic connection with SVK coupling NW 10/3, incl. connecting hose Operating instructions For axle loads of 10,000kg, a special permit is required; only indivisible loads permitted! The specified total weight is technically possible, but depending on the cargo, the admissible total weight may not be achieved while observing permissible axle, support, and saddle loads (poor driving or tracking may result from incorrect load distribution). Country of registration / registration plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle LoF (With Swiss registration, max. 40 km/h approval possible) Prepared for two-line license plate holder No contour marking / reflective strips according to ECE R 048 Paintwork Frame: RAL 7021 black grey "10-year anti-corrosion warranty" Drawbar: galvanized Ramps: hot-dip galvanize

Koşul: yeni, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 910 mm, toplam genişlik: 2.550 mm, NEW VEHICLE Fliegl Tandem Timber Transport Trailer with Stanchions, Type TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional Information + Pre-transport / provision from logistics location 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly angled with 'Load-Lock Profile' for securing lashing straps Gear support foot at the front Foldable rear support 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open compartment for stanchions under the loading area 4 pairs of stanchion pockets recessed in the external frame, 83 x 83 mm internal dimensions Dedpjw N U I Hsfx Afvjuu 4 stanchion pockets centrally recessed in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of removable stanchions W=80 / D=80 / L=2,000 mm, hot-dip galvanized Note: Stanchion sockets/inset stanchions are not designed for the sole load securing of long materials, pipes, etc., without lashing Aluminum side underrun protection Tandem trailer tow bar assembly Drawbar with certified 40 mm towing eye Drawbar length mechanically adjustable by 4 x 500 mm increments from 1,800 - 3,800 mm, set at 1,800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/Running gear laser-measured" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake Integrated air tank 2 fool-proof coupling heads at the front, with connecting hoses to the truck, ABS and ALB, ABS socket at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles guaranteeing full ABS functionality! Electrics 24 Volt, multi-chamber LED rear lights, yellow LED side marker lights, LED number plate lighting (Note: depending on towing vehicle, possible diagnostic errors may occur despite full functionality) 2 white position lights at the front (LED) 2 white/red lane lights at the rear (LED) 2 x 7-pin fool-proof plugs at the front with connecting cables Floor Phenolic plywood approx. 30 mm thick for high point-load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on cargo, the total weight might not be achievable within permissible axle, support, and fifth-wheel loads. Special permit required if the overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. Registration / Plates Registration country: Germany With Dekra inspection and certificate 24/7-Service hotline Prepared for single-line number plate holder Contour markings with reflective strips per ECE R 048, white on sides, red at rear Paintwork Chassis hot-dip galvanized incl. passivation "15-year warranty against rust-through" Note: Floor warping due to galvanizing possible! Vehicle is from ongoing production – delivery time approx. 2–3 weeks.

Koşul: ikinci el, azami yük ağırlığı: 8.470 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2018, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.800 kg Boş ağırlık: 3.330 kg Yük kapasitesi: 8.470 kg Toplam uzunluk: 6.950 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.420 mm Dedpfx Aoy Arkajfvjuu Yükleme yüksekliği: yaklaşık 950 mm Diğer bilgiler - Ön destek ayağı - Katlanabilir arka destek - 450 mm yan paneller - Büyük yük sabitleme paketi - Şase sıcak daldırma galvanizli ve pasifleştirilmiş - Opsiyonel yükleme rampaları: 1.280,00 €

Koşul: yeni, azami yük ağırlığı: 10.600 kg, toplam ağırlık: 14.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm including rear bevel Width: 2,550 mm Loading height: 900 mm Further information plus freight / provision from stock 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consisting of: Central axle trailer chassis Fine-grain steel welded construction Outer frame slightly sloped, new version with "Load-Lock profile" for lashing strap attachment 6 pairs of lashing rings outside in floor/outer frame, each 5t 3 pairs of lashing rings outside in floor, each 5t 1 x front in the corners, 1 x before and 1 x in the rear bevel at the back Gear support leg at front Foldable rear supports Wheel chocks with holder Steel underrun protection Full-width rear mudflap (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing device for central axle trailer Drawbar with certified 40 mm eye Height adjustable drawbar via spindle, max adjustment range 250 mm Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" to reduce tyre wear and fuel consumption Air suspension with raise & lower valve Wheels & Tyres 235 / 75 R 17.5" manufacturer’s choice Steel twin rims, factory silver Brake system 2-line compressed air brake system Spring loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle, 24 Volt EBS, electronic braking system with EBS socket at front and connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Djdpfsy Dzk Sox Afvouu Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable, Floor Steel/ribbed plate floor for high point load resistance Note: slight floor unevenness possible due to welding distortion! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / corner stanchions at front 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to frame with bracket for securing ramps, entry width approx. 2,430 mm Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (front section with steel/ribbed plate) with gas strut for one-person operation Operating notes The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permitted axle, nose, and fifth wheel loads. (Poor driving and trailing behavior due to incorrect load distribution possible) Special permit required for trailer train length exceeding 18,750 mm. Observe country-specific registration regulations. Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line number plate holder Contour marking with reflective strips acc. ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Novagrau "10-year anti-perforation warranty" Front wall aluminium Side wall anodized aluminium Ramps hot-dip galvanized

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at rear with 80 mm spherical bearing gear support leg at front foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Sideboard contacts the toolbox when folded down. Lockable storage space for loading ramps underneath the loading area WITHOUT ramps towing equipment for central axle trailer drawbar with certified 40 mm towing eye drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5" manufacturer’s choice steel rims, factory silver Brake System 2-line air brake system colour-coded line routing for easy servicing manual spindle parking brake integral air reservoir ABS and ALB, with ABS connector at the front, with connection cable. Attention: The trailer may only be towed by vehicles which guarantee effective operation of the ABS! 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Hydraulics three-way tipping system, hydraulic multi-piston ram with stroke limiter and safety cable low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted on the lorry. hydraulic connection with SVK plug NW 10/3, incl. connecting hose hydraulic operation via truck PTO Dedpfoy Dzlcox Afvjuu Tipping Platform Robust tipping platform with 4 mm steel floor, steel sideboard structure, continuous sidewalls, foldable not pendulum-mounted, without central locking below. Removable corner stanchions at the rear. Rear wall foldable and pendulum-mounted, central locking below. Loading platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retraction springs (not possible with split sidewalls) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each 5 tonnes Operating Instructions The stated gross weight is technically possible; depending on the load carried, the total weight may not be achievable in compliance with the permitted axle, support and kingpin loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline prepared for one-line number plate holder Contour markings with reflective strips according to ECE R 048, sides white and rear red Paint Finish Frame hot-dip galvanised including passivation "15 years warranty against rust-through" sideboard/platform RAL 5002 ultramarine blue Note! Platform internally only primed if painted platform version ordered! Optional: Pair of ramps €1,280.00 / net

Koşul: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: Duodpjtrizkofx Afvsu 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Koşul: yeni, azami yük ağırlığı: 23.890 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Vehicle from ongoing production NEW VEHICLE Fliegl 3-axle low loader, Type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Loading length: 8,680 mm Load bed: 6,500 mm including 900 mm approach ramp Loading height: 860 mm Dedpek N Adkofx Afvjuu Air suspension with lift/lower valve Long ramps 2,800 mm, hydraulically operated Width extensions to 3,000 mm with warning panels and rotating beacon Large lashing package with 5.0 t and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye: 40 mm Plus pre-delivery / provision ex-stock Wiesmoor €1,280 net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT Monthly rate: EUR 609.00

Koşul: yeni, azami yük ağırlığı: 15.080 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 1 dingil, NEW VEHICLE Fliegl 1-Axle Special Low Loader Gross Weight: 21,000 kg Payload: 15,080 kg Unladen Weight: 5,920 kg Overall Length: 13,630 mm Load Length: 9,940 mm Low bed inclines from wheel area, tapering down to a loading height of 210 mm Hook-in rail for aluminium ramps across the entire width of the rear Tow eye at the rear Electric winch with a pulling force of 8,165 kg, radio remote control, cable length 35 metres 1 pair of wheel recesses approx. 700 mm behind gooseneck 2 pairs of plug-in wheel chocks, 4 possible mounting positions Dedpfollwitox Afveuu Comprehensive lashing package BPW axle with drum brake Air suspension with lift and lower valve Full LED lighting 1 pair of aluminium loading ramps, load capacity 12,000 kg, central storage compartment on the loading area Frame hot-dip galvanized, outer frame painted red Plus delivery / provision ex stock Wiesmoor €1,280 / net New vehicle without initial registration with full manufacturer's warranty Vehicle is immediately available Leasing offer: term 48 months, residual value 40%, down payment only VAT. Monthly instalment: EUR 899.00 (other terms available)

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Dsdpfx Ajv D T R Eofvsuu Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,

Koşul: yeni, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem Low-bed Trailer First Registration: New vehicle Gross Weight: 10,500 kg Unladen Weight: 2,500 kg Payload: 8,000 kg Overall Length: 7,280 mm Loading Length: Platform length approx. 5,500 mm Width: Platform width 2,050 mm / 2,550 mm Loading Height: Platform height 630 mm Additional Information: plus advance freight / provision ex stock 26639 Wiesmoor €1,280.00 net - Overall height approx.: 2,900 mm - Side wall height approx.: 400 mm - Frame RAL 5001 Green-blue Chassis: Central axle trailer, low bed Fine-grained steel welded structure Telescopic support leg at front Rear supports telescopic Wheel chocks with holder Steel mudguards over both wheels Drawbar equipment: central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Axles & Suspension: Euro axles at our discretion, with tapered roller bearings and S-cam brakes "Axles/chassis laser aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushing and mechanical axle load equalization (rocker balancing) Dedpswwab Aefx Afveuu Wheels and Tires: 235 / 75 R 17.5" as per manufacturer’s choice Steel rims, factory silver Brake System: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connector hoses to tractor unit ABS and ALB, with ABS plug at front, including connection cable Please note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrical System: 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Platform TTS: Deep steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to floor Brake System: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connector hoses to tractor unit 24 Volt ABS and ALB, with ABS plug at front, including connection cable Please note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrical System: 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED (Note! With certain towing vehicles, diagnostic errors may occur even though the function is ensured.) 2 white position lights at front in LED 2 white/red lane marker lights at rear in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable Electrical / ABS / air connection sockets on the drawbar Platform TTS: Deep steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to floor Platform length 5,500 mm Trough front and side with “Load-Lock profile” for securing lashing straps (front 8 pcs., each side 16 pcs.) Note: Slight floor rippling possible due to welding distortion! 2 pairs of lashing eyes, 1x at the front corners of the steel trough and 1x at the rear in the floor, each rated 5 t 3 additional pairs of lashing eyes in the floor, each rated 5 t 4 pairs of lashing eyes bolted to the side walls Loading Ramps: Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on the ramps Ramp surface with "Mega Grip" from serrated grating (tipping area with steel/chequer plate) with gas pressure springs for single-person operation

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended Duedoynvrwepfx Afveu without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Koşul: yeni, azami yük ağırlığı: 8.580 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus freight/handling from warehouse location 26639 Wiesmoor €1,280.00 net Chassis central axle tipping trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing Duodpfx Aey Dzliefvju Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the full width (not available in conjunction with forklift holder) Quarter-shell mudguards 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The drop side touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the platform Central axle trailer coupling Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, maximum adjustment range 300 mm Axles + Suspension GFA or BPW axles at the manufacturer's discretion, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Color-coded line installation for easy servicing. Manual spindle-type parking brake 24V ABS and ALB, with ABS plug at the front, complete with connection cable, Attention: The trailer may only be towed by vehicles capable of supporting the ABS functionality! 2 foolproof coupling heads at the front, with connection lines to the towing vehicle Electrics 12 to 24 volt, multi-chamber LED lights, side yellow LED marker, LED license plate lighting (Note! With some towing vehicles, diagnostic errors may occur, even if function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable 1 additional LED work light at the rear, switched via reverse light Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, no flow restrictor. If required, this must be retrofitted to the truck. (Truck must have a maximum hydraulic flow rate of 55 l/min) Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic operation via truck PTO Tipping platform Robust tipping bed with 4 mm steel plate floor, steel side panel assembly, continuous side panels, foldable and swinging, with central locking at the bottom. Rear stanchions plug-in. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 5,000 mm, side panels with 6 hinges at the bottom. Side wall retraction springs (not available with fold-down front wall) Platform width 2,420 mm 3 pairs of lashing rings in the floor, each rated for 5 t Operating notes The indicated total permissible weight is technically feasible; depending on the load, the total permissible weight within the allowable axle/support/kingpin loads may not be achieved. (Poor driving or tracking behavior can result from incorrect load distribution) Country of registration/Number plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at rear Paint Frame hot-dip galvanized including pa

Koşul: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Dusdpfjnzlg Dox Afvju Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.

Koşul: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Dedpfx Asrducpsfveuu Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Koşul: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Dujdpfxout Idnj Afvsu Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl Tandem Low Loader with Ramps, Type TPS 118 Chassis fully hot-dip galvanized – side walls aluminum Vehicle in ongoing production – delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm including rear slope Width: 2,550 mm Loading height: 900 mm Further Information plus pre-transport / provisioning ex stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer High-tensile steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for attaching lashing straps 3 pairs of lashing rings (external, in floor), each 5 t 1 in front corners, 1 at and 1 within the rear slope Pair of lashing rings (external in the floor/outer frame), each 5 t Support leg at the front Dodpfxev E Dqle Afvsuu Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminum Rear underrun protection, galvanized steel Full-width rear mudflap (not in combination with forklift holder) Partial round fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing equipment: central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalization) Brake system Two-line compressed air braking system Color-coded piping for easier servicing Manual spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front and connection cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, lateral yellow LED lighting 2 white front position lights in LED 2 white/red marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Floor Steel/chequer plate flooring for high point load tolerance Note: Slight floor undulation due to welding distortion possible! Platform length approx. 6,200 mm Rear inclination approx. 900 mm Front wall/corner stanchions 25 mm aluminum box section, 400 mm high Side walls 25 mm aluminum box section, 400 mm high, foldable and removable Middle stanchions 1 pair folding stanchions, sidewall height, foldable and removable Rear wall/rear corner stanchions 1 pair steel stanchions attached to frame, with holders for securing the ramps Entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with grab handle on ramps wooden covering (tip area with steel/chequer plate) gas spring assisted for single-person operation Paintwork Chassis hot-dip galvanized including passivation “15 years warranty against rust-through” Front wall painted RAL 9006 White Aluminum Drop sides painted RAL 9006 White Aluminum Loading ramps hot-dip galvanized Finance lease offer: 48 months term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Dujdpjxrx Nlofx Afveu Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Koşul: yeni, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, frame and chassis hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Djdpfjllwhnex Afvjuu Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach ramp Loading height: 900 mm Comprehensive lashing package Drawbar 40 mm Tyres 235 / 75 R 17.5" dual wheels Without ABS, approval max. 60 km/h Electrical system 12 Volt, LED beacon Ramps with spring assist, ramp length 2,800 mm Vehicle from current production – lead time approx. 14 days. Plus freight/preparation from Wiesmoor depot €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Hire purchase offer: 48-month term, residual value 40%, down payment only VAT. Monthly rate: €599.00

Koşul: yeni, azami yük ağırlığı: 34.310 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Vehicle / Body: Trailer Container Chassis Semi-Trailer Unladen weight: 3,690 kg Total length: 13,500 mm Width: 2,520 mm Fifth wheel height approx.: 1,120 mm Further information: - 3-axle - Frame hot-dip galvanized incl. passivation - 1 x 45-foot container with extended gooseneck tunnel and slanted front corners Dodpsk N Acusfx Afvsuu - 24 t, 2-speed landing gear, single-sided operation - Side underrun protection in aluminum, underrun protection in galvanized steel, extendable underrun protection for 45-foot containers - Plastic toolbox - Air suspension - 1st axle with automatic lift axle - Tyres 385/55 R22.5 - 2x 7-pin and 1x 15-pin sockets in front From current production

Koşul: yeni, azami yük ağırlığı: 13.200 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.550 mm, Gross weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Loading length: 7,500mm incl. rear bevel Width: 2,520mm Dedper Da Uvsfx Afvsuu Loading height: 860mm Additional information: - Frame painted in stock colour Nova grey - 70 mm wooden floor - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring assist - Folding rear support - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of flush-mounted ring lashing eyes in the outer frame (can be converted to stake pockets), each rated to 5t, 7 pairs of lashing mushrooms flush-mounted at the top and side of the outer frame, each rated to 10t - 50mm towing eye - Air suspension - Lift & lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at the front - LED beacon - 2 pairs of warning boards, double LED illuminated, extendable to 3m Plus delivery/hand-over ex stock location 26639 Wiesmoor €1,280.00 net

Koşul: yeni, azami yük ağırlığı: 32.100 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-axle low bed semi-trailer with ramps, model SDS 470 T Gross weight: 41,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall length: 13,300 mm Loading bed: 9,200 mm Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Large lashing package 70 mm wooden floor SAF axles, 3rd axle is a self-steering trailing axle plus pre-carriage / handling ex yard Wiesmoor €1,280.00 / net Vehicle is available immediately from stock. Dodpek N Aflsfx Afvsuu Hire purchase offer: 48 months term, 40% residual value, down payment only the VAT. Monthly installment EUR 999.00 (payable net only)

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provisioning from warehouse location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Front gearbox support leg Foldable rear support Dedpfx Afoy Dzk Eoveuu 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter-shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Note! When folded down, the drop side contacts the toolbox. Lockable storage space for loading ramps below the loading platform Central axle trailer towing system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + suspension GFA drum brake axles "Axle/chassis laser aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker equalization) Wheels and tyres 235 / 75 R 17.5" as per manufacturer’s choice Factory silver steel rims Brake system 2-line compressed air brake system Color-coded line routing for easy service. Manual spindle parking brake ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure effective ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without restrictor. If needed, must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic operation via truck PTO Tipper bodies Robust tipping body with 4 mm steel sheet floor, steel side walls, sides continuous, foldable and pendulum-mounted with central locking at the bottom. Rear corner stanchions insertable. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Drop side return springs (not available with split sides) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated to 5 t Operating notes The stated gross weight is technically possible; depending on the load, the total weight may not be achievable within the permitted axle/support/king pin loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration / signs Country of registration: Germany With Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against perforation corrosion" Side walls / body RAL 9005 deep black Optional loading ramps €1,280.00 net

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Djdpfx Aewlmr Rjfveuu Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...