Kullanılmış Müller-Mitteltal Kwh 9,9 Kabeltransport-Anhänger Mit Benzinmotor satın al (12.393)

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles Redpfx Astplv Tshhew * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step access on the left side as climbing aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electric power connector * LED taillights ----Tipper body: * Steel pallet-type 3-way tipping body * Continuous top side walls with internal tube reinforcement – foldable, without centre stanchions, with drop-side torsion spring assist * Fold-down tailgate with manual central locking, can also be operated in swing mode * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grained steel floor plate * Lashing hooks, mounting rail at the rear for loading ramps * Prepared for retrofitting extension side panels ----Chassis: Redpjl Th A Esfx Ahhjw * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, plus 4 x 3 t lashing rings recessed into the external frame on each side ----Aluminium loading ramps: * 1 pair of aluminium ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment underneath the loading surface, recessed into the chassis at the rear ----Tyres: * Tyre size 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted in a black shade * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sideboards painted in RAL 9010 Pure White * Side wall paintwork in a RAL colour available at extra cost ----General Information: * Reinforced superstructure with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: Rodpfel Tihuox Ahhsw * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: Rjdpfxsl Tnvgj Ahhow * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest Rsdpfjxptn Dox Ahhjw ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking Rjdpfx Ahjxf Skpehew * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Rodpfxsndpn Se Ahhew * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) Redpfx Ahjl Th Adehow * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg Rjdpfxopk D Iio Ahhsw ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders Rsdpfxorwc R As Ahhew * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting Redpfxel Thymo Ahhow * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing aggregate ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights 12/24 V * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required) Redpfx Ahjx Hm Rcehjw ----General Attachments: * Jost mechanical landing gear front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks at the central locking positions as well as 2 on the front wall * Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter) * Rear stanchions bolted * Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * Each corner with 1 x 5 t lashing point * 4 x 3 t recessed lashing rings per side on the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear mounting rail for access ramps * 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear ----Tires: * Tire size: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to prior sale and errors * Sample images ----Delivery Time: * Available immediately from calendar week 29/2026

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange-type Drawbar Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye Rodpfox Hm Riox Ahhew ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks installed at the central locking bearings and 2 units on the bulkhead * Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter) * Rear stanchions bolted * Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point at each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Chassis: * Chassis constructed of fine-grain steel ----Ramps: * Rear fitting track for loading ramps * 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis ----Tyres: * Tyres: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir and landing leg painted in a black tone * Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion ----Information: * Reinforced superstructure with load securing certificate * Subject to errors and prior sale * Sample images ----Delivery Time: * Ready for immediate delivery ex works from week 29/2026

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Rjdpexf Skvsfx Ahhjw * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) Rjdpfxex Ipa Ne Ahhew * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * 15-pin electrical connector * LED lighting * Front landing gear * Rear folding support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolted bulkhead made of smooth sheet metal * Foldable side walls made of trapezoidal profile steel sheet, split once in the middle * Steel rear wall, can be inserted between the ramp holders; when not in use, stored inside at the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing eyes every 600 mm – four lateral lashing rings installed on each side * One 6.3 t lashing ring each at the front and rear corners * Profifix lashing rail along the longitudinal axis centerline for lashing up to LC 3000 daN * Various holes in the front and rear cross member for 1.2 t lashing options Rodpfx Ahjl Th Dfohew * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in black tone * Side wall paintwork in a RAL color of your choice (no special or metallic finishes), changeable up to approx. 6 weeks prior to completion * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 31 / 2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: Rsdspk D I Aspfx Ahhow * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t axles * Air suspension with raise/lower function and RtR valve * Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height * Smart-Board information tool mounted on trailer with pressure sensors for total axle load display * Last axle configured as self-steering axle with electro-pneumatic steering lock * Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop legs and rear swinging supports on chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights Rjdpfx Ahjwh Hdxjhow * 2 LED work lights on trailer sides (no truck-side installation) * 7-pin socket at rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation) * Mechanically adjustable warning sign holder packages front and rear * Straight steel fenders * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners * On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable * Rear drop-in wall, 150 mm high * Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps * Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks * Tread plate above axles * Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps * Swivel arm as a carrier for connecting lines from the truck to the trailer * Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear) * Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest * 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers * 2nd sliding cover...

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white Rodpfx Aex Ipapehhew ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards Redpfsx Ipbgox Ahhsw * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights Rjdpfx Aox Ipb Hohhjw * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu Rjdpowyhzpjfx Ahhow * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering system * Height-adjustable drawbar, approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Fixtures in front of the bulkhead and rear for retrofitting 20" container locks * Bolted smooth sheet metal front wall * Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x * Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use * Bolted rear stakes * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side * 1 x 6.3 t lashing ring fitted in each front and rear corner * Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN * Various holes in front and end cross members for 1.2 t lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear ascent slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, drawbar eye, and support winch painted black * Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion * --Reinforced and certified body as per EN 12642 XL including load securing certificate-- * New vehicle with manufacturer warranty * Subject to prior sale and errors * Available from approx. week 31 / 2026 Redpfjl Thvxex Ahhjw

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation Rodpsr Dpz Aofx Ahhow * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle Rjdpsx Ipavofx Ahhew * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf