Kullanılmış Müller-Mitteltal Müller-Mitteltal Etue-Ta-Er 18 Tandem Römork Yükleme Rampalı satın al (48.165)

Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes Bodpfxetplwis Ah Esli ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) Bodpel Th I Asfx Ah Ejli ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 14.050 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2011, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.500 mm, Üretim yılı: 2011, Donanım: ABS, * HUGENTOBLER UL-18 * Aktarma sistemi * Brandalı kasa Bedpfjyhtniox Ah Esli * Alüminyum taban * Yük alanı uzunluğu: 7000 mm * Yük alanı yüksekliği: 2500 mm * Alüminyum jantlar * Lastikler 385/55R22.5 * Taşıma kapasitesi: 14.050 kg * Boş ağırlık: 3.950 kg * Üretim yılı: 2011 * Durum: Çok iyi * Çalışma saatleri: Pazartesi-Cuma 07:30-12:00, 13:00-18:00, Cumartesi 07:30-17:00. * E-posta: * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber İngilizce: Mladen Ilic

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne Bledpexw T Uaofx Ah Eei - Çift tekerlek dingili

Durum: ikinci el, makine/araç numarası: 39500, boş ağırlık: 8.250 kg, azami yük ağırlığı: 31.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/1995, lastik boyutu: 235/75 r17,5 zwilling, renk: turuncu, Further information Main and outer frame constructed from high-strength double-T profiles, grade ST 52.3, profiled longitudinally in four sections, with high-webbed front and rear end plates as well as crossmembers; frame features a flat-contoured offset drop and rear loading ramp slope (0.8 m in length) behind the bogie passage; lowest possible floor height achieved by recessed wheel wells above the rear wheels; bogie platform's front corners are chamfered at 45 degrees. Two recessed UVV lashing rings each located on the bogie platform and on the loading ramp slope for attaching tensioning devices. Rear end equipped with wide bearings for a sixfold-supported ramp shaft. Side safety guard with protective bar compliant with EC regulations, wheel chocks with clamp safety feature. Low-maintenance inclined roller bearing axles with automatic brake adjusters, dual-line compressed air brake system in accordance with EC standards, and parking brake. Bogie and towing drawbar: Manufactured from double-T profiles in a welded construction with a slewing ring connection, standard drawbar length 1500 mm, fitted with 8 drawbar eyes (50 mm diameter), support leg with threaded spindle height adjustment; vehicle does not have axle load compensation! 24 Volt electrical system, two interchangeable 7-pin connection cables, large rectangular four-chamber taillights including rear fog light and reversing spotlight, front distribution box, rear outline marker lights, side marker reflectors, as well as bracket for single-line license plate. Blodpfx Asi Rixgeh Eoi Undercarriage made of 40 mm thick pressure-impregnated pine wood. Low-bed platform and ramp slope feature crossed upper decking, 30 mm thick, laid lengthwise; total floor thickness is 70 mm. Bogie platform features a longitudinal simple floor with a recessed, open tool box, dimensions L 700 x W 800 x D 180 mm. Ramps: Welded construction with tray sheet, cross beams, longitudinally-laid wooden decking (50 mm thick), ramp ends reinforced, ramp holding rods with turnbuckle and lock, ramps can be shifted 470 mm to each side, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with external and internal springs for easy single-person operation, with automatic ground supports. Steel shot blasted, zinc phosphate primed, single-colour acrylic finish in RAL colours, wheels painted silver, available in standard, light, and metallic colours as well as two-tone paint finishes; wood surfaces stained.

Durum: ikinci el, boş ağırlık: 9.300 kg, azami yük ağırlığı: 14.700 kg, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 10/2024, toplam genişlik: 25.500 mm, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17.5 / 10mm, ön lastik ölçüsü: 235 / 75 R 17.5 / 10mm, işletme ağırlığı: 24.000 kg,

Durum: ikinci el, boş ağırlık: 3.750 kg, azami yük ağırlığı: 14.250 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1993, toplam uzunluk: 2.450 mm, toplam genişlik: 1.500 mm, süspansiyon: çelik, lastik boyutu: 385 / 65 R 22,5, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, leaf suspension, ABS (anti-lock braking system), side aluminium underrun protection. Body: container 6.0 to 7.0 m, mechanical locking mechanism. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted. Bljdpfxei Rmkte Ah Eei

Durum: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (anti blokaj sistemi), bağlama halkaları, iki parçalı çıkış rampaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlekler, alet kutusu. Blodsy R Ekiopfx Ah Esi Üst yapı: Hidrolik iki parçalı çıkış rampalı (hidrolik olarak katlanabilir ve yana kaydırılabilir) 3 akslı alçak şasi dorse, galvanizli rampalar, 3x 10 tonluk SAF akslar, kampanalı frenler, ekskavatör kolu için oyuk, 50 mm çekme gözü! Üst platform yaklaşık 1500 mm, alt platform yaklaşık 6300 mm! Rampa uzunluğu yaklaşık 4200 mm! Ek ücret karşılığında uygun 40 mm çekme barı da temin edilebilir! AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve hatalar saklıdır!

Durum: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires. Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted! Bljdswypl Nepfx Ah Eoi

Durum: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires. Bodexgilmopfx Ah Eoli Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Durum: ikinci el, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Üst platform uzunluğu yaklaşık 2900 mm! Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır! Bedpsywvhrjfx Ah Esli

Durum: ikinci el, boş ağırlık: 3.110 kg, azami yük ağırlığı: 9.490 kg, toplam ağırlık: 12.600 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2016, bir sonraki muayene (TÜV): 02/2025, yükleme alanı uzunluğu: 4.550 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 600 mm, süspansiyon: çelik, lastik boyutu: 285/70R19.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), lashing eyes, tool box, swing tailgates Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Loading height approx. 1290 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Bodpfx Aowth Iioh Ejli

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Bledpfx Ajqpgtmsh Esi Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.880 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 980 mm, Üretim yılı: 2026, SAF akslar, kampanalı frenler İç uzunluk yaklaşık 4.880 mm İç genişlik yaklaşık 2.420 mm Toplam genişlik maks. 2.550 mm Yüksüz yükleme yüksekliği yaklaşık 1.510 mm Sürgülü brandalı tavan Platform Bljdpfx Ajylf Rqsh Eji Kasa tabanında sabitleme halkaları Ara satış ve yazım hatası hakkı saklıdır! Araç kiralık veya kiralama yoluyla satın alınabilir!

Durum: ikinci el, azami yük ağırlığı: 16.950 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2006, bir sonraki muayene (TÜV): 04/2026, Üretim yılı: 2006, * Müller Mitteltal T3 NG * Transportador de plataforma baja * Rampas * Neumáticos dobles * Peso total permitido: 24.000 kg * Peso en vacío: 7.050 kg * Carga útil: 16.950 kg * Neumáticos: ver fotos * Ejes BPW * Disponibilidad inmediata ¿Tiene preguntas? Contáctenos para asesoría rápida, también directamente por WhatsApp: Bjdpfx Aheyv Ug Dj Eeli Ofrecemos: Compras netas para empresas de la UE con número de IVA válido y para clientes extracomunitarios. Opciones de leasing y financiación. Gestión de todos los trámites aduaneros. Emisión de matrículas temporales y de exportación. Transporte al puerto. Todos los precios en los portales de anuncios incluyen el IVA legal del 19%.

Durum: ikinci el, azami yük ağırlığı: 39.500 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 9.345 mm, Üretim yılı: 2010, * Müller Mitteltal T50 Compact * Low-bed trailer * Ramps * Tires: see images * 5 axles * Gigant axles * Permissible gross weight: 50,000 kg * Unladen weight: 10,500 kg * Payload: 39,500 kg * Air suspension * Immediately available * Subject to prior sale and errors. Do you have any questions? Contact us for quick assistance, you are also welcome to reach out directly via WhatsApp: Our services include: Bjdpfx Ahoyzlyxe Eoli Net purchase for companies within the EU with a valid VAT ID number, and for customers from non-EU countries. Leasing and financing options. Handling all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed in classified ads are gross prices and already include the statutory VAT of 19%.

Durum: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-odalı arka farlar * Turuncu döner uyarı lambası * Duomatik hava bağlantısı * BPW-ECO akslar ----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız). Blsdpjyulu Uefx Ah Eei

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: Bljdpfxel Tlhrj Ah Eoi * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function via RtR valve * Smart-Board for infotool * Side underrun protection * Swing-out support legs at the rear chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight galvanized steel splash guards, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox located on turntable platform * LED tail lights Bjdel Tpwyspfx Ah Eoli * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * 4 stake pockets on each side, each with 2 t lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant swivel and lowerable lashing rings, loadable in all directions and recessed in the outer frame (corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at rear slope) * Widening planks stored in the center of the loading area * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tank etc. painted in black tone * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVWR * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available approx. week 32 / 2026 * Sample photos

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved Bjdpfx Ahsl Thxdo Esli * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed Bodpfsl Tik Nsx Ah Esli * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Durum: yeni, azami yük ağırlığı: 23.210 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS fren sistemi * Yaylı fren silindiri için acil boşaltma tertibatı * Kampana frenler * 3 x 11 ton BPW Eco dingil * Parabolik yaylar * Arkada mekanik aks dengesi * Yan çarpma koruması * Şasi çerçevesinin arkasında döner destek ayakları * Ön ve arkada mekanik olarak ayarlanabilir uyarı levha setleri * Ön aks kapalı plastik çamurluklar, arka aks düz galvanizli çelik sac etekler, her biri çamur korumalı * Yanlarda ve arkada reflektör şerit * Dönel platformda alet kutusu için (galvanizli) açılır kapak * Yaklaşık 650 x 300 x 600 mm ölçülerinde, yanları şasi altında bulunan siyah toz boyalı galvanizli çelik sac alet kutusu * 15 pinli elektrik fişi * LED aydınlatma 12 / 24 V * Arkada (çıkartılabilir) LED tepe lambası * 40 mm çeki halkalı çekme makası ve yükseklik ayarı çekme yayı ve gerdirme mili ile * Yanlarda dörder adet kütük yuvası (kütükler mevcut değil) ve aynı zamanda bağlama halkası * La-Si paketi: Dönel platform ana şasinin önünde, sağda ve solda iki adet 6,4 tonluk bağlama halkası * 5 çift UVV döner ve alçaltılabilir bağlama halkası * Tüm yönlerde yüklenebilir ve köşelerde dış çerçevede 13,4 ton, diğer yerlerde 10 ton * 3 m toplam genişlik için 6 çift katlanabilir mekanik açılır uzantı (arka eğimde değil) * Yük alanının altında saklanan genişletme tahtaları * Arka aks üzerinde yaklaşık 2.100 mm uzunluğunda, iki çift 6,4 tonluk yan bağlama halkasına sahip ekskavatör kolu destek alanı * Hidrolik katlanır rampalar (yaklaşık 4.650 x 720 mm), hidrolik olarak ayarlanabilir uç parça, yük tutma valfleri, hidrolik yan rampalar kaydırma * Römorkta hidrolik akış bölücü (kamyonda 40 l/dk’dan 140 l/dk’ya kadar pompa gücü için), çift hatlı hidrolik sistem * Döner tabla üzeri yük alanı: yaklaşık 1.960 x 2.520 mm * Arka yük alanı: yaklaşık 6.500 x 2.520 mm (860 mm tırmanma eğimi dahil) * Yüklü iken yükseklik: yaklaşık 860 mm +/- 30 mm denge ünitesi * Şasi, döner tabla, katlanır uzantılar, arka düşme destekleri ve rampa tamamen galvanizli * Dingiller, yaylar, çekme makası, hava tankları vb. siyah renkte boyalı Bsdpsq Dyv Iofx Ah Esli * Üretici garantili yeni araç * Hatalar ve ön satış hakkı saklıdır * Egestorf’tan hemen teslim

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights Bsdpfx Ahjpk D Aws Eoli * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: Bodpfx Ahjpk D Dqo Eoli * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) Bsdpfx Ahoylfvmo Eoli ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026