Kullanılmış Müller-Mitteltal T 3 Profi 30,0, Hydr. Rampen satın al (63.172)

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) Guodetplv Tspfx Akueb * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) Guodpfxspk D Iij Akujb * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18 ----Braking System: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Towing Eye: * Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Support winch at front * Foldable galvanized steel underrun protection for paver feeding * Closed single plastic mudguards * Front wall platform made of grating with access step at drawbar and handrails on the front wall ----Chassis: * Chassis made of high-tensile fine-grain steel ----Tipping Body: * 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist * Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking * 5 mm steel floor made of HBW 450 steel ----Load Securing: Gedpfxox Ipbye Akueub * 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor ----Tarpaulin: * Rolling tarpaulin - agate grey similar to RAL 7038 - * Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear ----Painting: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tanks, support winch, and flange-type towing eye painted in a black tone * Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t * New vehicle without initial registration including manufacturer's warranty * Subject to errors and prior sale * Sample images (photos may differ due to optional equipment) ----Delivery time: * Vehicle available from week 42/2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Eye: Gsdpfx Aksq Euageusub * Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ Tire Pressure Monitoring System * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Manual landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox, right-hand side * Two-step entry at the front left (in direction of travel) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead * Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking) * 4 mm steel bed * Rear ramp mounting rail ----Load Securing: * One lashing point (5 t) in each corner * Four lashing rings (3 t each) recessed on each side into the outer frame ----Ramps: * One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized * Axles, springs, air tank, flange eye and landing gear painted in black * Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. calendar week 28 / 2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalisation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector Gedpfxol Thw Io Akujub * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox on the right side * Two-step entry step at the front left (in driving direction) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall * Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading platform, recessed into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Koşul: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * RDÜ tire pressure monitoring system * EBS brake system, drum brakes, BPW axles, parabolic springs * Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights * Tow bar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully covered steel mudguards * Swiveling cable drum superstructure * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepped polyamide centering cones * Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms) * With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. Guedpfxoy Rb Tye Akueb * Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake. * Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated into the side guard, exterior polyester-coated in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote! * We are an official Müller Mitteltal dealer! * Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value). * Request your quotation now! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, appointments can be arranged as needed * We speak German, English, Russian, Polish and French ----

Koşul: ikinci el, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2012, bir sonraki muayene (TÜV): 05/2028, Üretim yılı: 2012, Dahili araç numarası: G300402 Alman aracı Hemen teslim, Kaufungen - Kassel, Almanya’daki tesisimizde Daha fazla bilgi: Luis Lucena Üretim yılı: 2012 Treyler boş ağırlığı: 6.530 kg Beton mikseri treyleri LIEBHERR 10 m³ Hatalar olabilir Kullanılmış aracınızı memnuniyetle takas olarak alırız. Finansman direkt olarak firmamızda mümkündür. Gsdpexy Ul Sefx Akusub GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning's Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlar konusunda uzmanınız. Hemen teslim! Teslimat mümkündür. Fiyat talep üzerine! Finansman ve kiralama seçenekleri talep üzerine mümkündür. Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg Muayene: Mart 2026 dinamik muayene: Eylül 2026 Genişlik: 2,47 m Uzunluk: 6,20 m Yükseklik: 90 cm Daha fazla fotoğraf veya video için lütfen talepte bulunun. Guodpfxeycpd Ae Akujb Johanning's Nutzfahrzeuge – seçkin ve genç ikinci el araçlar için ortağınız. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) - Aracınızın durumu ne olursa olsun takas imkanı - Aracınızın ücretsiz anında kayıttan düşülmesi - 150 €'ya tescil hizmeti (ücretler ve plakalar dahil) - Kısa süreli tescil - Her zaman telefonla randevu alarak inceleme ve test sürüşü mümkün - Anlaşmaya göre kapıya teslimat mümkündür. Yanlışlık ve ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 13.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2008, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 850 mm, yükleme alanı hacmi: 10 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.580 mm, Üretim yılı: 2008, Donanım: ABS, Müller-Mitteltal Three-way Tipper 2-Axle Tandem Trailer VIN: 051973 Chassis / Attachments: * Air suspension * 2 x BPW Eco Plus axles with drum brakes * Tires: 385/65 R 22.5 * Remaining tire tread: Front approx. 20/80%, Rear approx. 30/80% * Fixed underrun protection * Drawbar with 50 mm eye * 1 x Jost support leg on the drawbar Body: * Müller-Mitteltal three-way tipper * Aluminum side boards, 850 mm * Bulkhead and tailgate 960 mm * Approx. 10 m³ * Pallet-wide Gjdpfey H Tryex Akuoub Weights: * Gross weight 18,000 kg * Payload 13,900 kg * Unladen weight 4,100 kg Other: * German registration * * Safety inspection 03/2027 * 1 previous owner New main inspections / safety checks or reductions/increases of weights are possible upon request. We are happy to assist you in obtaining export/transfer license plates and can also arrange for the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in reconditioning and trading commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is extremely important to us, which is why we offer our customers an excellent all-round service package and provide a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organizing special transport We are happy to help you organize special transports. Temporary/export license plates We will gladly assist you in procuring export/temporary license plates. Handling customs formalities We will gladly assist you with customs matters.

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin Gedpfx Ajwyhzpekueub * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pin for variable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable by mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection Gujdeu I Iqxspfx Akusb * Closed lateral underrun protection, usable as advertising surface * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum support structure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the support arm ends, as well as central claw-locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP engine with gear pump (150 bar) * Surface: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plate and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height adjustable in mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel fenders with splash protection * Enclosed side underrun protection, also suitable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum assembly, interior width between drum arms 1,700 mm – with tension lock for drum securing at the ends of the support arms and central claw lock for securing the cable drum assembly to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter with centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset Guodpfxsu I Iqlo Akujb * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front Gusdpfxou I Iqre Akueb * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsionally stiff square tubing and cross-members * Enclosed steel mudguards with splash protection * Enclosed side underride guard, can be used as an advertising space * Plastic toolbox with floor liner (laying installation) approx. 500 x 350 x 400 mm * Swiveling cable drum construction, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrying arm ends as well as a central claw lock for connecting the cable drum frame to the chassis * Motor hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power unit with Loncin petrol engine, includes manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes Guodpou I Iq Eefx Akuob * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends * 1 Pair of Stepped Polyamide Centering Cones * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes Gusdpfeu I Iqfox Akueb * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights Guodpfxoxyniwo Akuob * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2020, bir sonraki muayene (TÜV): 11/2026, Donanım: ABS, Alman aracı, ilk elden kazasız Yan paneller alüminyumdan SAF akslar Kampanalı fren bakımlı durumda kiralama, satın alma, kiralı satın alma Full servis ile kiralama aylık net 590 Euro'dan itibaren mümkündür (kira fiyatları sözleşme süresine bağlı olarak farklılık göstermektedir) tüm bilgiler aşağıda Kiralı Satın Alma Örneği: 36 ay vadede aylık net 479 Euro, 5.000 Euro net peşin ödeme ve 2.000 Euro net son ödeme. Gusdpfx Aey Haz Ujkueb Tüm fiyatlar net olup KDV hariçtir ve olumlu kredi değerlendirmesine tabidir.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: VAVJS1339PH522406, boş ağırlık: 8.520 kg, azami yük ağırlığı: 30.480 kg, toplam ağırlık: 39.000 kg, ilk tescil: 01/2024, yükleme alanı uzunluğu: 13.500 mm, süspansiyon: hava, lastik boyutu: 385/55 R22.5, renk: sarı, Üretim yılı: 2024, Donanım: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forcibly steered Vehicle identification no.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Fifth wheel height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for load capacity 20 t at center of gravity over 4 m loading length - Frame height at front approx. 230 mm - 2'' replaceable kingpin - Frame designed for unladen fifth wheel height approx. 1,120 mm - 1,200 mm for air-suspended tractor - Exterior frame with 4 mm perforated rail, hole spacing approx. 100 mm, oblong hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, countersunk, foldable, also outward foldable - 8 pairs of insert tubes with plug-in socket for stanchions 80x80 mm, both sides on the outer frame - 6 insert tubes with plug-in socket for stanchions 80x80 mm, transversely over full width, max. traction force 2,000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle fixed - 2nd and 3rd axles with turntable mount for forced steering STEERING - "Tridec TR" forced steering for two turntable-steered axles, heavy-duty design - Self-acting forced steering, front saddle turntable with steering wedge - Actuated via two steering rods, rear axle on bogie mount Godpfxexq S H Is Akuoub - Central lubrication points for steering at front saddle turntable and rear bogie - Axle lift on first axle, raises and lowers automatically depending on weight, start-off assist with speed limit BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle with sensor - RSS/RSP - stability control program - Spring-actuated parking brake on 2 axles - Aluminium air tanks - Brake/air connections with Quattromatic quick couplings - EBS/ABS socket at the front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for data reading via display (mileage, axle group load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood flooring with steel hat-profile rails above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted both sides to outer frame - Rear crosswise aluminum forklift protection strip - Enclosed SPECIAL steel toolbox, make Schoch, black-coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox/ lid painted in solid color - 8 removable hardwood cross-beams approx. 100/100 mm, steel-edged, fixable in plug-in sockets on outer frame Very good condition, German registration certificates, immediately available.

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader? Drive-Over Flatbed Trailer Enquiry Reference: 11630. Vehicle available immediately from Alsdorf stock ?BRAND NEW VEHICLE incl. COC * Gross weight: 21 t, payload: 16.50 t, galvanized chassis * Flatbed design with 400 mm high front wall, ramp locking via ramp support bars and diagonal bracing * 21 t gross weight version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unladen * 7 m loading platform with 400 mm high front wall * Extended ramps: 3 m single-piece, hot-dip galvanized steel ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop-forged lashing shackles (LC 8,000 daN) fitted to the existing hole pattern in the 45° outer frame; positioned approx. 1 m from front/rear cross member * 10 UVV lashing shackles LC 3,000 daN, retractable into the existing hole matrix in the outer frame * 2 UVV lashing rings each at front + rear, recessed in the cross member, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear end cross members * Device for retrofitting container locks (container locks available and possible at extra cost) * 50 mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * Plastic toolbox in front of the bulkhead on the right, in the direction of travel * LED lighting system * 7-pin socket at rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Side marker lights with flashing function * Warning panel for oversize loads * 1 removable round LED beacon incl. bracket and installation * Rear folding supports, front support leg with geared crank * ---- Lease-purchase example from our partner MMV Leasing: ¤ 665/month net, 60 months term, no down payment and "0" Euro final value Other terms with/without down payment/residual value possible! We are an official MüllerMitteltal dealer Godpfx Akoyvxg Ueujub ----* Opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * WhatsApp

Koşul: ikinci el, boş ağırlık: 3.110 kg, azami yük ağırlığı: 9.490 kg, toplam ağırlık: 12.600 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2016, bir sonraki muayene (TÜV): 02/2025, yükleme alanı uzunluğu: 4.550 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 600 mm, süspansiyon: çelik, lastik boyutu: 285/70R19.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), lashing eyes, tool box, swing tailgates Guedswth Iispfx Akusb Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Loading height approx. 1290 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift Gsdpfsykxflex Akujub * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle no. for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock Braking System (ABS) No liability for printing or typing errors Sale exclusively to business customers Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We can provide a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners * 30-day export license plates available    All export documents possible, but must be requested separately individually * TOLL booking for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Ek bilgiler 400 mm aşağıya katlanabilir yan paneller - Yan panel yaylı kaldırıcı - Sökülüp takılabilir arka panel - Büyük bağlama paketi - Yükleme alanı delikli ray - Ön yükseklik ayarlı destek ayağı - Arka katlanabilir destek ayakları - Plastik alet kutusu - BPW dingiller - Yaylı ızgara rampalar Godpfx Akoy Hn D Rjusub

Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system with RTR function * 1st axle liftable * Last axle as self-steering trailing axle with electro-pneumatic steering lock via PIN reverse gear (lock of trailing axle from the tractor for maneuvering purposes – without any truck-side installation – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display via EBS signal, without need for truck-side installation * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical landing leg at the front, mechanical swing-down support legs at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center posts) up to the drive-on slope * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin power connector * LED rear lights * LED revolving beacon (removable), including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber flooring * 400 mm steel front wall, plug-in * Perforated outer frame, approx. 45 degrees bent, with fixture for fitting 3 t lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * In front and end crossmembers, various holes for 1.2 t lashing options * Hydraulic, one-piece ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible later retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, rear mechanical supports, and ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf Guedor Dpzxopfx Akujb

Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways Godsr Dpz Aspfx Akusub * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Gusdpfx Akoxt Rw Reuob