Kullanılmış Müller-Mitteltal T3 Kompakt - Dreiachs-Überfahr-Tieflade-Anhänger - Luft - Auffahrrampe satın al (8.273)

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Towing Bar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll-off containers * Steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 stops plug-in with articulated buffer ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for securing skips with tensioning elements (positive and frictional locking) * 4 cloverleaf lashing rails on the sides and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded bead anti-slip surface in the inclined ramp area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: Bsdjtplv Topfx Ah Sjwl * Contour tape side and rear, reflective * Axles, turntable, drawbar, and air tanks painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible gross weight: 27,000 kg * New vehicle, unregistered, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Koşul: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 30505 ---- * Remote diagnostics with display option in truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofit of additional side panels * Lockable compartment under the tipping platform for loading ramps * Incl. 1 pair aluminum loading ramps 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN flush mounted and foldable in tipper floor (centered) * Hardwood excavator bucket rest * 2-step access in front of the front wall (hot-dip galvanized) * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stanchions screwed on, hot-dip galvanized * Extension cables for the rear drop side * Plastic toolbox on right side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at rear of trailer Bwedpeyvxg Iefx Ah Sel ---- * Hire purchase price: * e.g. €549 for 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request our offer! * We are Müller-Mitteltal dealers * Free delivery possible for timely orders! ----Our business hours: Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, appointments can be arranged. We speak German, English, Polish, and French. WhatsApp

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakılmış tandem platform dorse ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Bedpjymuz Uofx Ah Sswl Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakımlı tandem platform römork ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap zemin * Ağır yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Bsdpfx Asymuz Ish Sjwl Takas mümkündür %3,99’dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Tüm Almanya’ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton Boş ağırlık: 6.530 kg Yük kapasitesi: 25.470 kg Azami toplam ağırlık (zGG): 32.000 kg Bedex Utq Sopfx Ah Sewl

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps * Reinforced body with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 Bodpfx Ahsx Hm Rio Sewl * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front Bjdpfx Ahjx Hm Rcs Sswl * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Koşul: ikinci el, azami yük ağırlığı: 10.960 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.500 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - Çelik - Sıcak daldırma galvanizli Bwsdpfxsytma As Ah Sjl - Alüminyum yükleme rampaları - Rampa saklama bölmesi - 500 mm katlanabilir yan korkuluklar - Yan korkuluk yayları - Gigant akslar - Lastik ebadı 285/70R19,5 - Yüksekliği ayarlanabilir çeki kolu - Ön ve arka destek ayağı - Plastik alet kutusu - Ön tırmanma basamağı

Koşul: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck’s dashboard via EBS signal – without truck-side installation – * 2 x 9 t Gigant axles * Air suspension with ride-height control during tipping operations * Drawbar with 50 mm flanged towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gear at the front * Folding galvanized steel underrun guard for paver feeding Bedpjxl Nkgefx Ah Sowl * Closed single plastic fenders * Standing platform at the front wall * Manual roll tarp * 15-pin electrical connector * LED tail lights with galvanized protective cover * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile – continuous, without central stanchion – pendulum-mounted with manual central locking and left side fold-down wall with board wall spring assist) * Roll tarp in RAL 7038 agate grey (approximate), tensioned lengthwise with ratchet tensioners at the sides and stretch cords at front and rear * Front wall platform made of grating with access step on drawbar and grab handle on the front wall * Tailgate – made of HBW 400 steel – pendulum-mounted with automatic two-claw lock * 5 mm steel floor plate made of HBW 450 steel * Four recessed and foldable lashing rings per side (3 t each), integrated into the steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Tipper bridge and side walls in RAL 9010 pure white * Painting of board walls in RAL 9010 pure white * Painting of side walls in any RAL color shade upon extra charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Bwsdox Ipapjpfx Ah Sol * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: Bedpsx Ipbajfx Ah Sowl * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) Bsdsq Euakepfx Ah Sjwl * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: Bodpfx Ahjtpta Ds Sswl * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low-loader | Flatbed | Trailer Available immediately | Request number: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer Technical Specifications: * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to front wall * Platform height unladen 930 mm / laden 870 mm * Single-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured with holding rods and diagonal supports * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * 4 drop-forged lashing eyes (UVV, LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm). Installation of drop-forged lashing eyes LC 3000 daN at approx. 600 mm spacing possible. Closely spaced transverse profiling, high-profiled front and rear closure, rear access ramp, hot-dip galvanized. * 10 recessed UVV lashing eyes LC 3000 daN in pre-existing hole pattern in outer frame, additional options * Further lashing options via holes (Ø 50 mm, LC 1200 daN) in front and rear beam * Toolbox positioned in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 recessed container locks in front cross member * Height-adjustable support jack at the front, foldable supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable; 50 mm towing eye available on request * 1 removable LED marker light at rear ---- Leasing, hire purchase, financing, and trade-in available E.g. 515 euros for 60 months term without down payment or final residual value ---- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, we are available by appointment Bjdpsyadz Rofx Ah Sswl We speak German, English, Polish, and French Leasing, financing, and trade-in possible

Koşul: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring brake cylinders Bwsdpfx Ahov Nulze Sjl * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when disconnecting the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side * Side-mounted storage box 1,000 x 500 x 500 mm * Enclosed plastic fenders front & rear axle * Closed side underrun protection, usable as advertising panel * Rear underrun guard * Plastic bumper buffers at the rear * Hazardous goods sign at the rear * 15-pin electrical connector * LED tail lights * Conveyor (roller) track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Mechanically adjustable stop brackets (2 positions) front left and right on the running tracks * 265/70 R 19.5 twin tires * Curb weight 3,220 kg * --Technical gross vehicle weight rating of 20,000 kg possible-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, kingpin plate and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference Number: 11612 * NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white * Door-to-door delivery available for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping platform for loading ramp * Includes loading ramps 3.31m, 8t per pair * 4 UVV lashing rings LC 5000 daN at front and rear Bodeyl Ebpjpfx Ah Sowl * 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered) * Net hooks * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm * Galvanized chassis * Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on the front wall --- Please request an individual quote from us! Additional equipment options available. Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner" --- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged. WhatsApp Leasing, financing, and trade-ins possible---

Koşul: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles! Bwjdpfx Ahsi Rk Axe Sjl Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1997, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, lashing eyes, mechanical ramps, rear support, lateral aluminium underrun protection, twin tires. Body: 2-axle low-bed trailer with mechanical drive-on ramps, 2x SAF axles, drum brakes! Loading height approx. 900 mm! Bwsdpfx Aov R Hmash Sjl Ramp length approx. 2650 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 2.910 kg, azami yük ağırlığı: 7.590 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2009, bir sonraki muayene (TÜV): 04/2025, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, side underrun protection, front support, rear support, swinging tailgates Bwjdpfx Ajv S H Sfsh Sol Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost of €900.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Koşul: ikinci el, boş ağırlık: 2.230 kg, azami yük ağırlığı: 3.770 kg, toplam ağırlık: 6.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1984, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 10.5-20, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, front support, rear support, swing doors, height-adjustable drawbar. Bwodpfx Aeuxd Rpjh Sol Body: 3-way tipper trailer with towing eye and brake connections (red, yellow). ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 3.650 kg, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2011, bir sonraki muayene (TÜV): 08/2024, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 285/70R19.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing rings, underrun protection, front support, rear support, swing tailgates, height-adjustable drawbar. Body: Tandem 3-way tipper trailer with aluminum drop sides, 2x Gigant axles, drum brakes! Bwjdpfxjth Uavs Ah Sol Loading ramps available at an extra charge of €990.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: ikinci el, boş ağırlık: 2.700 kg, azami yük ağırlığı: 7.300 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2007, yükleme alanı uzunluğu: 5.020 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 400 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, mechanical ramps, front support legs, storage box, height-adjustable drawbar. Body: Tandem low-bed trailer with mechanical drive-on ramps, 2 BPW axles, drum brakes! Loading height approx. 930 mm! Bjdpfxowvikqe Ah Sowl Ramp length approx. 2,600 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm Bwodopk D Awjpfx Ah Sjl ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 Bwodpepk D Iiefx Ah Sol ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brakes) * Tire pressure monitoring with in-cab display via EBS signal – no vehicle-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right-hand side * Storage box for container net, made of galvanized perforated sheet, 1,000 x 500 x 500 mm, mounted on the side * Enclosed plastic mudguards, front and rear axles * Closed side underrun protection (RAL 9010 pure white) suitable as advertising surface * Rear underrun protection * Rear plastic impact protection buffers * Foldable A-board * Hazardous goods sign with document pouch and reflective rear parking warning panel * 15-pin electrical connector * LED lighting system with protective cover * 2 LED reversing lights (operated via reverse gear) * Additional front loading with lowered rear track and removable stop * Roller recesses at the turntable area with mechanically adjustable angle stops (2 positions), front left and right on the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp locking system * For the transport of external roll containers according to DIN 30722 Part 1 – Dekra cargo securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking components hot-dip galvanized Bwodpfxjl Tn U Ro Ah Sjl * Air tanks, axles, turntable, and drawbar painted in black finish * --Permissible gross weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images