Kullanılmış Es-Ge 2-Achs-Tiefbett (Tridec Lenkung) satın al (52.649)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 29.000 kg, toplam ağırlık: 38.000 kg, ilk tescil: 08/2020, renk: kırmızı, Üretim yılı: 2020, ES-GE 2-Axle Lowbed, non-extendable, Tridec Steering Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth-wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing radius (tractor unit): approx. 2,100 mm Coupling height: approx. 1,150 mm B-dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Raised bed loading height: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle assembly: approx. 3,000 mm Tractor unit details A-dimension: approx. 4,500 mm Coupling height: approx. 1,150 mm Swing radius: approx. 2,100 mm Chassis: - Chassis manufactured from high-quality fine-grain steels - Lowbed in rigid construction - Axle assembly not detachable - Without excavator trough Kingpin - 2" kingpin Landing legs - Without front landing gear Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each – brand: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, centralizing device - Axle spacing approx. 1,360 mm Suspension - Air suspension with lift and lower system - Second ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle steering - All axles steered, make "Tridec" Tyres - 9 tyres 245/70 R 17.5, load index 146/146 F – tyre brand: Continental - Steel rims Brakes - Dual-line air brake system according to EC directive, make "Knorr" - Automatic load-dependent brake force regulator - Operated via standard air couplings, red/yellow, acc. ISO 1726 - Electronic brake system (EBS), 7-pin socket acc. to ISO 7638, mounted at the front, acc. to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake with spring-loaded cylinder - 4 wheel chocks with holders - Without connecting hoses (Wendeflex) to tractor - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load readout Rear underrun protection - Integrated into the rear end plate Side frame - Side frames made of UNP steel, approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity in the rear area of the gooseneck, approx. 400 mm above the ground - 1 pair of lashing rings with approx. 13,400 kg tensile force at the rear of the lowbed at the vertical neck - 7 stake pockets per side on the inside of the outer frame for bolsters approx. 80x50x4 mm, evenly distributed along the loading platform - 6 stake pockets per side welded externally onto the longitudinal beam Iedpfx Abou U Np To Tjat Floor - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Chequer plate (approx. 8/10 mm) above axle assembly Bulkhead - Designed as a toolbox with lid, approx. D 400 x H 450 mm, spanning the full width of the loading platform, corners chamfered Side panels - 3 removable, anodised side panels on the gooseneck, approx. 2,440 x 400 mm - Removable stanchions at rear, galvanized Finishing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and single-color coating in RAL 3002 flame red - Axles and landing gear KTL-c

Koşul: ikinci el, azami yük ağırlığı: 21.130 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 2.540 mm, toplam yükseklik: 1.980 mm, Donanım: ABS, Kässbohrer SLL 2-axle low bed trailer with hydraulic steering Highlight: Optionally available for rent as a complete combination together with the truck shown. Manufacturer: Kässbohrer Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Low-bed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ----Chassis & Axles • 2 axles • 2 hydraulically steered axles • Axles: BPW • Suspension: Air suspension • Suspension travel: 260 mm (190 mm / -70 mm) • Additional lifting of driving level by 40 mm available • Load gauge for axle load display • Semi-automatic centering of steered axles with warning light sensor ----Braking System • WABCO EBS 2S/2M • ABS (Anti-lock Braking System) • RSS (Roll Stability Support) • Brake system in compliance with UN ECE R13 ----Electrical & Lighting • 24V LED lighting system • 2 × 7-pin + 1 × 15-pin socket • LED brake lights • LED rear and fog lights • Electrical system according to UN ECE R48 & ADR • LED work lights at the rear (2 pcs, reverse-dependent) • LED beacon (1 pc) ----Tires & Rims • Tire size: 245/70 R17.5 • Tires: M+S • 3PMSF (suitable for winter) • Tire pressure monitoring system as per R141 • Number of wheels: 9 complete wheels • Rims: Steel rims (Kässbohrer selection) • Spare wheel holder: 1 pc on gooseneck ----Steering & Operation • Hydraulic steering for both axles • Control panel inside vehicle • Wireless remote control for external steering operation • Multifunctional WABCO Smartboard • Axle load indicator • Suspension control • Tire and brake wear monitoring • Breakdown & system monitoring ----Chassis & Frame • High-tensile steel S700 MC (ISO 1726) • Welded bogie-bed connection • Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck • Adjustable and detachable gooseneck • 1 × 2 hydraulic cylinders, 220 bar operating pressure • Kingpin: 2 inch, bolted • Kingpin position: single position ----Platform & Body • 3 removable platforms with hardwood flooring • Dimensions per platform: 100 × 1,300 × 2,115 mm • Weight per platform: 225 kg • 2 lashing rings per platform with 8,000 kg tensile strength each • Platform widening: 225 mm, galvanized • Extension brackets: 12 × 2 pieces, galvanized ----Load securing Lashing rings: • 1 × 2 pcs, 13.4 t on gooseneck • 7 × 2 pcs, 13.4 t • 4 × 2 pcs, 8 t in the low bed • 2 × 2 pcs, 13.4 t • 3 × 2 pcs, 8 t on rear platform Stake pockets: • 6 × 2 pcs in pool (50 × 100 mm) • 3 × 2 pcs at rear (50 × 100 mm) ----Attachments & Accessories • Aluminum front panel gooseneck: 360 × 1,550 mm • Aluminum side walls: 360 × 1,900 mm • Aluminum rear wall: 360 × 2,480 mm • Toolboxes right & left (500 × 350 × 400 mm) Iedpfsycnbaex Ab Tsat • Central lubrication system • Side underrun protection according to ECE R73 • Warn... [Text truncated, please provide the remaining text for completion if needed.]

Koşul: ikinci el, azami yük ağırlığı: 21.130 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 2.540 mm, toplam yükseklik: 1.980 mm, Donanım: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Ijdpfxeynprwo Ab Tjat Type / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Lowbed Semi-Trailer Country of Registration: Germany Brand: Kässbohrer Chassis Colour: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swinging door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Total weight (40/60/80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40/60/80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional lifting of ride height by 40 mm possible * Load gauge to display axle load * Semi-automatic tracking of steered axles with warning light sensor Braking System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Braking system compliant with UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin sockets * LED brake lights * LED rear and fog tail lights * Electrical system according to UN ECE R48 & ADR * Rear LED work lights (2 pieces, reverse dependent) * LED beacon (1 piece) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (suitable for winter) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 piece on gooseneck Steering & Control * Hydraulic steering for both axles * Control panel in vehicle * Radio remote control for external steering operation * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallization (85% zinc / 15% aluminium) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Size per platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * 2 lashing rings per platform, each with 8,000 kg lashing capacity * Platform widening: 225 mm, galvanized * Extension brackets: 12 × 2 pieces, galvanized Load Securing Lashing rings: * 1 × 2 pieces 13.4 t on gooseneck * 7 × 2 pieces 13.4 t * 4 × 2 pieces 8 t in lowbed * 2 × 2 pieces 13.4 t * 3 × 2 pieces 8 t on rear platform Stake pockets: * 6 × 2 pieces in pool (50 × 100 mm) * 3 × 2 pieces at the rear (50 × 100 mm) Attachments & Accessories * Aluminium gooseneck front panel: 360 × 1,550 mm * Aluminium side panels: 360 × 1,900 mm * Aluminium tail panel: 360 × 2,480 mm * Toolboxes on right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning boards (423 × 423 mm, up to 1,000 mm) * Yellow reflective side tape * Red reflective rear tape For further information, we are at your disposal.

Koşul: ikinci el, azami yük ağırlığı: 69.060 kg, toplam ağırlık: 84.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2013, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.540 mm, Donanım: ABS, Acil ve kısa vadede erişilebilir araçlarımızın tamamını internet sitemizde bulabilirsiniz. Iaedpfxsy Ikbho Ab Tst Donanımdan bir alıntı. Tam donanım talep üzerine sunulur. - Yüksek kaliteli QSTE ince taneli çelikten şasi, merkez kirişli, teleskopik değil - Halka başına yaklaşık 100 kN yük mukavemetli, katlanabilir sabitleme halkaları - Yük sehpası bölgesinde 4 çift payanda cebi, yaklaşık 80 x 80 mm - Hidrolik destek ayakları (elektro-hidrolik) - 6 x 11.000 kg (teknik), SAF akslar - Havalı süspansiyon - 1. aks yönlendirmeli, 2. aks sabit - 3. - 6. akslar zorunlu yönlendirmeli - Tridec direksiyon - Ek yönlendirme - NATO soketi - 1. aks kaldırılabilir - Lastikler 265/70R19.5 - 3,5 inç değiştirilebilir king pin - Wabco ABS/EBS fren sistemi - Yaklaşık 400 mm yüksekliğinde çelik ön duvar - Kuğu boynunda 2 yan kapak - RAL 3000 kırmızı, tek renk boya

Koşul: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice Iaedpfxey Auhze Ab Tjt * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv

Koşul: ikinci el, Üretim yılı: 2000, ES-GE 4.vod-25-40.4-h13. Baujahr: 2000. 10-Tonnen-SAF-Achsen. Eigengewicht: 16.840 kg. Nutzlast: 45.660 kg. Gesamtgewicht: 62.500 kg. Sattellast: 22.500 kg. 2-fach ausziehbar: 10,4 Meter + 9,3 Meter = Gesamt 19,7 Meter ausziehbar. Hydraulikversorgung über NATO-Kupplung vom Zugfahrzeug. Servolenkung mit 4 gelenkten Achsen. Luftfederung. Werkzeugkästen. Abmessungen Ladefläche: Länge: 16.000 mm. Breite: 2.550 mm. Iodpfoy Ay Efsx Ab Tjat Höhe: 1.500 mm. Sattelhöhe: 1.250 mm. Bereifung: 275/70R22,5, Profil 80%. Deutscher Auflieger! ID-Nr.: 487. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten sowie für sämtliche Verträge und den ihnen vorausgehenden Verhandlungen. Mit einer Kontaktaufnahme erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen an und bestätigen deren Kenntnisnahme. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2000 Leergewicht: 16.840 kg Zuladung: 45.660 kg zGG: 62.500 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: yeni, azami yük ağırlığı: 39.070 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded structure made of high-quality steel profiles with through cross-members. Designed for high point loads * Outer frame as UNP profile * Wear plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also suitable for 3.5-inch mounting) Underrun protection: * According to EU regulations, bolted version Side impact protection: * According to EU regulations Landing gear: * 24 t landing legs with single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheel bolts with ET 120, total air suspension lift approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary slide valve with stop function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on the lift/lowering unit bracket * Smartboard/TIM/Infocenter, without TPMS display Isdpfx Aeyz E T Sob Tsat Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start assist via push button in driver's cab (15-pin socket PIN12). The cab push button is not included in delivery Brake system: * Two-line compressed air brake system according to EU standard with EBS and RSS, automatic load-dependent adjustment, spring-loaded cylinders as parking brake, anti-swap coupling heads firmly mounted on front cross-member, no connecting line to the tractor unit, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), ET 120 * Basic tyre pressure monitoring system, connected to the EBS CAN-bus system * Tyre pressure display in the driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EU regulations, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray design Load securing: * 8 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) * 6 pairs of lashing rings in the outer frame, evenly distributed (pulling force approx. 10 t) Stanchion pockets / stanchions: * 5 pairs of stanchion pockets recessed into the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed into the floor, approx. 90 x 90 x 4 mm * 10 removable stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Front wall bolted, approx. 1,200 mm high, sheet metal clad Stanchion magazine: * Magazine for removable stanchions inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized Omega steel profiles Lighting system: * According to EU regulations, 24 Volt with multi-chamber lights, LED side marker lights, white LED position lights front, LED outline marker lights rear, license plate lights * 1 x 15-pin and 2 x 7-pin socket at the front cross-member Equipment: * Warning plate according to ECE 70 * 2 x LED work lights at the lamp carrier (activated by reverse gear) * Bracket for rotating beacon at the rear (including rotating beacon) * 1 folding and extendable rear access ladder (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via switch on the c

Koşul: yeni, azami yük ağırlığı: 63.960 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available upon request. Chassis: * Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch king pin Underride protection: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing gear: * Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centered 10-hole wheel mounting, offset 0 * Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function Steering: * 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system * Centralized external grease points Axle lift: * First and second axles automatically liftable, with additional cutoff on the chassis Brake system: * Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M * Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck * Aluminum air reservoir Tyres: * 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice TPMS: * Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit Mudguards: * According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t) * 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t) * 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t) Stake pockets: * 10 pairs of stake pockets inset in the outer frame * 6 pairs of stake pockets inset in the floor (on outer longitudinal beam) Removable stakes: * 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: * On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm Front wall: * Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate Floor: * Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush Iodjwx Dcaepfx Ab Tsat Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lamps * Front white LED position lamps * Rear LED outline marker lamps * License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member Equipment: * Two wheel chocks with holders * Warning panel according to ECE 70 * Work light on lamp carrier (activated by reverse gear) * Bracket for rotating beacon at rear (including beacon) * 1 fixed access ladder on each side, including plug-in step assistance * Smart Board * Vehicle swing-out warning sticker & load center of gravity label Paintwork: * Chassis and front wall sandblasted and finished with high-quality coating * Chassis: hot-dip galvanized + RAL color of your choice * Front wall: RAL color of your choice * Front wall corner posts: ho

Koşul: yeni, azami yük ağırlığı: 56.570 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle stock with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Chassis frame construction made of welded longitudinal beams and inserted cross members * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the main beams * Maximum cross member spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing legs: Iodewx Dctepfx Ab Tsat * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brake * 22.5 single tires * Axle spacings approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity, lifting and lowering device with 1 rotary valve Knorr/Wabco * Mounting bracket for lifting and lowering device, bolted version Brakes: * Smartboard/TIM/Infocenter on the holder for lifting and lowering, in addition to the lifting and lowering valve, without battery (can only be operated with the towing vehicle) * Holder for lights and brakes at the front of the underrun nose, total height approx. 700 mm * Tire pressure monitoring basic version, connected to the EBS CAN bus system * With dual release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device installed at the rear left in driving direction * EBS brake system by Wabco, EBS diagnostics via CAN bus (EBS connector), no external diagnostic cable provided!! Tyres: * 8 x 445/65 R 22.5 – branded manufacturer of our choice * Hub centering Lubrication: * Grease nipple strips on the bogies and at the front on the steering. No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lamps on top of the front wall (rear-facing), switch on lifting/lowering control bracket * Robust front wall for platform body * Contour markings side yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lamps, installed in the lamp plate, switched via reverse gear * 2x LED work lamps, switched via reverse gear, 1x per side near landing gear * 2x LED reversing lights per side, 1 mounted before the 1st axle * Lighting/wiring system by manufacturer of our choice * Number plate lighting * The towing vehicle must provide adequate power for the chosen lighting (esp. reversing lights) * Position lights front, bottom, white, 1 each right and left (LED) * 24 volt lighting system with large multifunction lamp * Side marker lights (LED) flashing * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair of lane departure warning lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL color of choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD SLP lashing points per side w

Koşul: yeni, azami yük ağırlığı: 39.850 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment specification. Full specification available on request. Chassis: * Welded construction made from high-grade steel profiles with punched profile cross members * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting bracket at front for customer-side installation of a support device, approx. 90 x 90 x 4 mm Coupling gear: * 2-inch kingpin (also suitable for 3.5) Underride guard: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing legs: * 24 t landing legs, single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle assemblies, brand of our choice, disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel connection, 10 holes with ET 120 * Total air suspension lift approx. 200 mm, comprising lift approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent function, with RTR function * Switch for second driving height (+ approx. 50 mm) on the lift/lower device bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via push button in the cab (15-pin socket PIN12). Push button in the cab not included in scope of delivery Brake system: Brand of our choice * Dual-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads fixed to the front cross member, without connecting line to the truck Tyres: * 6x, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), ET 120 * Basic version of tyre pressure monitoring, connected to EBS CAN bus system * Tyre pressure display in cab (pre-installation by truck manufacturer) Mudguards: * According to EC standards, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray Load securing: * 8 pairs of hook plates welded into outer frame (lashing capacity approx. 3 t) * 6 pairs of lashing rings on the side in the outer frame, evenly distributed (lashing capacity approx. 10 t) * 13 pairs of lashing eyes (U-rings) in the outer frame (tested lashing capacity approx. 2.5 t per lashing point) Stanchion pockets/stanchions: * 5 pairs of stanchion pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: * Bolted front wall, approx. 1,200 mm high, clad with approx. 5.5 m sheet metal Stanchion magazine: * Inside at the front wall, magazine for plug-in stanchions Floor: Iaedpfxewx Dbpj Ab Tot * Approx. 28 mm hardwood floor recessed in outer frame, with galvanized omega-steel profiles Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate illumination * 1x 15-pin and 2x 7-pin connectors on front cross member Equipment: * Wheel chock with double holders * Warning sign according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for rotating beacon at rear (incl. rotating

Koşul: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, featuring vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through-type cross-members, designed for high point load * Underride nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Fifth wheel height at front approx. 130 mm Towing Equipment * 2" kingpin Underrun Protection * Bolted version, compliant with EC standards Side Protection * EC compliant, made of anodized aluminum profiles Landing Legs * 2 x 12 t landing legs with compensation foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle units, disc brakes 22.5" * Total lift approx. 180 mm * Lifting and lowering system via rotary slide valve Brake System * Dual-line compressed air brake system according to EC, with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversal-proof coupling heads permanently mounted on front beam, without connecting line to tractor unit Tyres * 6-off, 385/55 R22.5 160J on 11.75x22.5 ET 120 steel rims, manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Iasdpfx Abew U H Sbs Tst Fenders * EC compliant Spare Wheel Carrier Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.0 t * Outer frame with boreholes approx. every 400–600 mm for inserting tension belts Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed in outer frame with galvanized omega steel profiles Lighting System * EC compliant, 24 V, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline lights, rear * License plate lights * Lane marker LED lights * 1x15- and 2x7-pin socket connectors on front beam Equipment * 2 wheel chocks with holder * ECE 70 warning panels * Bracket for rotating beacon, incl. beacon * 2 rubber dock buffers at the rear * Rear right foldable and extendable access ladder (no platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind axles Paintwork * Front wall: RAL single colour of choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL single colour of choice * Central stanchions: RAL single colour of choice * Side guard system: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Add-on parts: galvanized/KTL black * Rims: silver Conspicuity Marking * Fully yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 insertable stanchions on inside of front wall * 5 x 25 side panels and rear panel made of anodized aluminum hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side panel and stanchion magazine: under-chassis left and right i

Koşul: yeni, azami yük ağırlığı: 34.350 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification on request. Chassis: * Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame * Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm * Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports * Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control * Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor) Kingpin: * 2-inch kingpin, replaceable from below Underrun Protection: * According to EU standards, fixed mounted Landing Legs: * 2 x 12 t landing gears with 2-speed gearbox Iasdpfjwt Iylex Ab Tot Axles: * 3 x 9 t air suspension axle units * Make: SAF with disc brakes approx. 370 x 45 mm * ABS * 10-hole wheel connection, centered, ET120 * Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm) * Air suspension control via hand lever with stop function Lift Axle: * 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket Tyres: * 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted Mudguards: * According to EU standards, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Make: Wabco * Dual-line brake system according to EU standards, with EBS and automatic load sensing * Spring actuators serving as parking brakes on 2 axles * Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor Lighting System: * According to EU standards, 24 Volt, * Multi-chamber rear lights * License plate lights * LED side marker lamps * LED position lamp (white) front and LED lane marker lights on the rear * 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor Load Securing: * 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t * 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t * Drilled holes in outer frame every approx. 500 mm for tie-down straps Stake Pockets: * 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Recesses: * Each side recessed with 8 stake pockets in the outer frame * 4 rows of stake pockets transverse to the loading platform Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame Front Wall: * Enclosed front wall * Storage depot for 16 detachable stakes approx. 100/40 mm * Front wall bolted to head frame Equipment: * 2 wheel chocks with brackets * 2x PVC toolboxes, approx. 600/400/500 mm * Bracket for revolving beacon at rear incl. lamp * 2 LED reversing lights (at rear) * 2 aluminium loading ramps, approx. 1,550 x

Koşul: ikinci el, azami yük ağırlığı: 32.610 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, bir sonraki muayene (TÜV): 11/2025, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete specifications available upon request. Chassis: * Welded construction made of high-quality steel profiles with through-profile crossmembers, designed for high point loads Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, compliant with EU regulations Side underrun protection: * Compliant with EU regulations Landing gear: * 2 x 12 t landing legs with compensating foot and single-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake system: Iajdpfx Aewyhy Esb Tot * Dual-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring-type cylinders as parking brake * Mistake-proof coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle * Brand: Wabco Tyres: * 6 units, 385/55 R22.5 160J on 11.75 x 22.5 steel rims, offset 120 Mudguards: * Compliant with EU regulations, PVC mudguards before and after the axle assemblies Spare wheel carrier: * 1 double basket with mounting material for one spare wheel with offset 120 Load securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.5 t * Holes for tension belts in the outer frame, approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin socket connections on front crossmember Paintwork: * Chassis and front wall cleaned by sandblasting, primed and painted in single color * Chassis: RAL 3002 Carmine red * SSV: Aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/black KTL * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locking for 1 x 20' container in the center * Work lamp on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Koşul: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with punched-through cross members, designed for high point loads * Underride protection nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at front approx. 130 mm Coupling Device: * 2" kingpin Rear Underride Guard: * Bolted version, compliant with EU regulations Side Underrun Protection: * EU-compliant, made of anodised aluminium profiles Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation, positioned front right Axles: * 3 x 9 t air suspension axle assemblies * 22.5" disc brakes * Total lift approx. 180 mm * Lifting and lowering device via rotary slide valve Braking System: * Dual-circuit compressed air braking system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Reversal-proof coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards: * EU-compliant Spare Wheel Holder: * Not included Load Securing: * 9 pairs of folding lashing rings, evenly spaced, traction approx. 5.0 t * 9 pairs of folding lashing rings, evenly spaced, traction approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching tie-down straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles Lighting System: * EU-compliant, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights front white * LED outline marker lights rear * Number plate lights * Lane assist LED lights Iasdpfougqvfex Ab Tjt * 1x 15-pin and 2x 7-pin connectors on front crossmember Equipment: * 2 chocks with holders * ECE 70 warning plates * Holder for rotating beacon incl. rotating beacon * 2 rubber bump stops at rear * Rear right access ladder, foldable and extendable (without platform) * 1 open box made of perforated sheet metal, lateral to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, positioned behind the axles Paintwork: * Front wall: single colour RAL as desired * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single colour RAL as desired * SSV: Aluminium anodised * Underride protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver * Contour marking: complete yellow Including Special Equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion sockets in the outer frame, evenly distributed * 4 rows of stanchion sockets across the load area * 20 pieces of stanchions made from galvanised tube 80/50, total length approx. 1,200 mm * Magazine inside front wall for 20 plug-in stanchions * Container locks for 1 x 40' as well as 2 x 20' containers, flush at rear * Container lock for 1 x 20' container central position * Work spotlight on lamp bracket (activated by reverse gear) * 2 stainless steel toolboxes, approx. 600x500x50

Koşul: ikinci el, azami yük ağırlığı: 13.380 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2014, bir sonraki muayene (TÜV): 12/2025, yükleme alanı uzunluğu: 7.350 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.290 mm, yükleme alanı hacmi: 41 m³, Donanım: ABS, * 9160 - Telefon sorguları için araç kimlik numarası * ABS, EBS, BPW-Eco-Plus dingiller, disk frenler, havalı süspansiyon kaldırma ve indirme * Böse içecek kasası / döner duvar kutusu, çatı altında döner duvar, portal kapılar, sağda palet durdurucu çıta, bağlama halkaları * Taşıma forklift bağlantısı * 1. dingil lastikleri: 385/65R22,5 (8 / 8 mm) Iaodpfx Ajxuy Tweb Tst * 2. dingil lastikleri: 385/65R22,5 (14 / 13 mm) ----e-posta adresimiz: sizin için hizmetlerimiz: - Kısa süreli veya gümrük plakası temini - AB genelinde transfer / teslimat - Araçların üçüncü ülkelere gümrük işlemleri Rusça sorularınız varsa aşağıdaki numarayı arayabilirsiniz * Sadece Rusça konuşanlar için WhatsApp: * İngilizce, Almanca ve diğer diller için WhatsApp:

Koşul: ikinci el, azami yük ağırlığı: 20.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2006, yükleme alanı uzunluğu: 13.400 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.400 mm, yükleme alanı hacmi: 80 m³, toplam genişlik: 2.600 mm, toplam yükseklik: 3.800 mm, Donanım: ABS, Soğutuculu kasa üstyapı, CARRIER soğutucu ünitesi Tipi: MAXIMA 1300, dizel - elektrikli, plastik taban, PALFINGER hidrolik arka kapak Tipi: MBB C 2000 L, çelik levha ve uyarı flaşörü, 2240 mm, maks. taşıma kapasitesi 2000 kg, geri görüş kamerası, ABS, EBS, BPW dingil(ler), TRIDEC mekanik direksiyon sistemi, disk fren sistemi, kaldırma-alçaltma özellikli havalı süspansiyon, destek ayakları, her iki yanda yük sabitleme rayı. SI84232 Iaedpsqc Rqkefx Ab Tot Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden teklif sunabiliriz! Araç reklam kaplamalı veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu ürüne özel finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: yeni, Üretim yılı: 2026, Equipment: BDF ZAA 2-Axle Swap Body Chassis 1120-1320 * Distance between twist-locks (width): 2259 mm * Distance between twist-locks (length): 5853 mm * Wheelbase: 1420 mm * Support height: 1120-1320 mm * Special lift: 450 mm * Ride height: approx. 1110 mm * Tyres: 385/55R22.5, new * Coupling eye height: 400 mm * Gross weight: 18,000 kg * Manufactured according to EN 284 for C745/C782, new * Tare weight: 3270 kg * Rubber-steel rear impact bumper * Guide rollers – 2 pairs * Bolted towing bar, non-adjustable in length * Side underrun protection made of steel, Wielton design * Support height: 1120 - 1320 mm * Frame made of high-strength S700 steel, hot-dip galvanized. Container carrier with individual locking devices (twist locks) for securing swap bodies. * Wheelbase: 1420 mm * Coupling eye Ø50 mm, height adjustable * Rear underrun protection made of steel, galvanized * Adjustable front bumper, suitable for C745 / C782 bodies * Steel lamp bracket * Axles and suspension * Number of axles: 2 * BPW axles 2x 9000 kg 22.5 with disc brakes. * Large air suspension stroke (450 mm). * Landing legs * 2 SAF steel crank-type landing legs at the front * 2 SAF steel crank-type landing legs at the rear * Mudguards * Single wheel mudguards, plastic * Rims * 4x steel rim 22.5-11.75 ET-120 * Tyres * Hankook tyres 385-55-22.5 * Other chassis equipment * Marker plates as per ECE * Wheel chocks with handles, installed * Two toolboxes (145 l Aberg), fitted on both sides in front of the axles * Brake System/Pneumatics * Wabco braking system with basic modulator with RSS/RSP * Steel air tank * Duomatic connection * HS valve, fitted in front of the axles on the left side (driver’s side) * Chassis paintwork * Frame hot-dip galvanized * Electrical system * Partial-LED lighting by Aspöck – EUROPOINT III * Hybrid lamp version (LED + bulbs). * Position lights in LED technology. * Other functions with bulbs. * Connection lines swivel arm right side (passenger side) * Electrical connectors: 15-pin and EBS. System meets ADR requirements * LED work lights controlled via a switch on the HS console: 5 LED lights at the rear (2 on each side, behind axles), LED lights at the front (2 on each side, in front of axles), centrally mounted LED light (1 unit, in front of the rear container carrier) * The system is developed for semi-trailers and trailers, and is used for monitoring the tyre pressure and temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (for tyre pressure and temperature) fitted to the rims and a device connected to the EBS. * Suspension lift relief system (Bounce Control) * Marking * Partial contour marking with Wielton logo * Partial contour marking, sides in white * Partial contour marking, rear in red * Warranty period for ON-ROAD / OFF-ROAD products * 24 months for the complete product from date of first registration * 36 months on the vehicle frame from date of first registration (excluding surface rust) * 10 years warranty against chassis perforation corrosion (understood as rust forming from inside to outside) * Guarantee: 24 months from registration, excluding wear parts, subject to a technical inspection after 12 months. The respective axle assemblies are warranted according to the axle manufacturers’ terms. Isdpfx Absyv Ttis Tsat * Delivery ex EBB, Heilbronn All information subject to change without notice. Errors and prior sale excepted.

Koşul: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) Isdpfx Aeyxc Eyeb Tjat - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Koşul: mükemmel (kullanılmış), ilk tescil: 10/2023, dingil mesafesi: 7.630 mm, renk: gümüş, Üretim yılı: 2023, Boş ağırlık: 7.490 kg Yük kapasitesi: 22.510 kg Azami toplam ağırlık (zGG): 30.000 kg Yükleme platformu yüksekliği: 110 cm APK (teknik ana muayene): 11/2026'ya kadar geçerli Iedpfxjylk H Ro Ab Teat Teknik durumu: çok iyi Görsel durumu: çok iyi A&D 2 Dingilli Vinç Kamyonuna Özel Semi Treyler 2 dingilli, havalı süspansiyonlu Arka aks TRIDEC yönlendirmeli SAF aks Şasi tamamen sıcak daldırma galvanizli Alüminyum yan kapaklar Alçak şasi yüksekliği: 110 cm Boyun uzunluğu: 403,5 cm Yükleme platformu uzunluğu: 636,5 cm 28 mm sert ağaç zemin Lastikler: 265/55 R 19,5 Stokta 2 adet aynı, sıfır semi treylerimiz mevcuttur.

Koşul: ikinci el, azami yük ağırlığı: 7.450 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 09/2012, toplam genişlik: 2.550 mm, toplam yükseklik: 3.800 mm, Donanım: ABS, Wiese 2 Dingilli Tenteli Römork * Gigant akslar, havalı süspansiyon ve kampanalı frenler * Lastik ebadı: 245/70R19.5 * Ön ve arka destek ayakları * Depolama kutusu * Yedek lastik tutucu * Havalı körükler yeni Ijdpfjyb U H Tjx Ab Teat Daha fazla bilgi için memnuniyetle hizmetinizdeyiz.

Koşul: ikinci el, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 12.340 mm, yükleme alanı genişliği: 2.620 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 1.450 mm, Düşük yatak: Toplam uzunluk - 8.530 mm, 1. aksa kadar uzunluk - 4.360 mm, yükleme yüksekliği - 690 mm, iki aks üzerinde uzunluk - 1.800 mm, yükleme yüksekliği: 900 mm, akslar arkasındaki uzunluk - 2.130 mm, rampa yüksekliği - 830 mm, ön eğim 240 mm, genişlik: 2.620 mm, kuğu boynu: 3.900 mm, treyler bağlantı yüksekliği 1.180 mm, ön king pin konumu: 1.150 mm, Alüminyum rampalar (UxG) 2.880x500 mm, yan başına 4 adet ağır yük sabitleme halkası, JOST destek ayakları, SAF aks(lar), kampanalı fren sistemi, yaprak süspansiyon, araç reklam ile kaplanmış ve/veya yazılı olabilir. SI85673 Iodsyqdguspfx Ab Tsat Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden memnuniyetle teklif sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu ürün için size finansman veya leasing teklifi sunmaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2022, Üretim yılı: 2022, Faymonville 2-axle low bed trailer MEGAMAX 2x12 t PA 2 steered axles Single telescopic, 2 x 12 t pendle axles Ijdpfey Hxd Ijx Ab Tjat Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technical extension (telescopic): approx. 4,700 mm Fifth wheel height (laden): approx. 1,205 mm Loading height (max. laden): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm Fifth wheel offset: approx. 1,200 mm Swing clearance radius tractor unit (rear): approx. 2,300 mm Swing clearance radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - SNT-designed gooseneck for optimized loading area length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 25,000 kg Bridge: - Extra-low 'SUPER LOW' design as an extendable vessel bridge - Length approx. 6,850 mm, with mechanical locking Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at rear - PENDLE-AXLE, all axles hydro-mechanically forced steered - Hose rupture valve on axle compensation cylinder with automated RESET function - Hydraulic cylinder with shut-off cocks and safety plugs for securing in raised position - Technical axle load: 12,000 kg each - Hydraulic axle compensation Brake system: - WABCO braking system, EBS-E in accordance with regulations Chassis tyres: - 245/70 R 17.5 3PMS Metallisation: - Complete HRM metallisation (High Resistance Metallisation) - Complete steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Coating: - 6-coat finish - Complete steel construction shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final painting with 2 layers of 2-pack paint (acrylic), single colour, then cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver grey - Drop side colour: Natural aluminium Steel construction: - Steel construction made from high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690Q/S700MC (yield strength 690 MPa) - MAG welding process according to EN ISO 4063

Koşul: yeni, boş ağırlık: 13.850 kg, azami yük ağırlığı: 31.150 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, yükleme alanı uzunluğu: 6.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 245/70 R 17,5, renk: siyah, Donanım: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame, integrated steering disengagement, and individually operable push-off cylinders - Integrated hydraulic cylinders and support arms for picking up and setting down the lowbed - Line connections to the lowbed mounted inside the main frame in the offset section - Mounting bracket for locking pins Lowbed, extendable: - Frame pre-tensioned to match max. payload, reduced payload in telescopic extensions - Prepared for the installation of load area widening devices - Telescopic stages approx. every 500 mm + container positions - 7 pairs of swiveling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screw-in lashing shackles - 1 pair of M36 threaded bushings inside the telescopic frame for screw-in lashing shackles - Prepared for mounting container locks - Adapter without bolt-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outside of the adapter; 1 pair on the inside - 45 mm spruce timber floor between the flatbed frames Running gear, drive-over design: - Steel welded construction in short build design with open excavator trough at the rear - Offset to the lowbed 90° with 2 pairs of holes at the front and rear of the running gear platform for attaching access ramps using securing pins - Different track widths achievable via 2 different sets of holes - Steel smooth plate with anti-slip finish welded over the axles, max. 5,000 kg axle load - End beam with cut-outs for lighting, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution installed protected in the intermediate floor Axles, suspension and tires: - Doll tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles 12 t, with ABS, AGS (automatic slack adjuster) - All axles hydraulically forced-steered, max. 60° steering angle on the last axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, all axles supplied with a locking pin enabling the axle to be lifted - DOLL tera pendle axle with hydraulic suspension and damping elements - Lift and lowering system with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering - Steering control mounted on a turntable at the fifth wheel Iaedpfxoy Dqkhj Ab Tst - Transfer of steering angles via a push-pull rod to the front sender cylinders - The rear receiver cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves centrally mounted on a control block - Axle load display via side-mounted manometer - Steering pressure monitoring display - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: - Front wall made of steel with spare wheel holder, bolted, height 520 mm, hot-dip galvanized - Side walls incl. rear wall, removable, approx. 400 mm high, anodized - Two BEKAMAX central lubrication units - DOLL Tronic CAN-Bus system - Support arms for picking up and setting down the lowbed - Fifth wheel plate with integrated steering disengagement, steering wedge, and 2'' kingpin for semi-trailer coupling - Gooseneck cylinders for picking up and setting down the lowbed - 6-way hydraulic coupling with relief valve for easy disconnection of hydraulic lines - Duomatic air

Koşul: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings Iodpewcmhajfx Ab Tjat - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks Iodpjhlz R Sefx Ab Tsat - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)