Kullanılmış Faymonville Spn-3A 45T - 20.6M! (13M60 + 7M) Telemax / Tele... satın al (7.261)

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2010, yükleme alanı uzunluğu: 136.600 mm, yükleme alanı genişliği: 2.500 mm, toplam uzunluk: 206.600 mm, toplam genişlik: 2.500 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, lastik durumu: 40 yüzde, renk: diğer, Üretim yılı: 2010, Donanım: ABS, = Ek Özellikler ve Aksesuarlar = - 3 aks - Kaldırılabilir aks - Hava süspansiyonu - Disk frenler - Yönlendirilebilir aks = Ek Bilgiler = Aks konfigürasyonu Dcedpfx Aozrzl Njfmsk Lastik ölçüsü: 385/65 R22.5 Lastik diş derinliği: %40 Arka aks 1: Yönlendirilebilir Ağırlıklar Boş ağırlık: 10.000 kg Yük kapasitesi: 35.000 kg Toplam ağırlık: 45.000 kg Bakım, geçmiş ve durum APK (Teknik periyodik muayene): 09.2026'ya kadar geçerli Teknik durum: çok iyi Görsel durum: çok iyi Finansal bilgiler Fiyat: Talep üzerine Tanımlama Plaka: QKW546

Durum: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Length: 1325 cm Net weight: 12,178 kg Gross vehicle weight: 59,000 kg 12-ton axles Steerable on all axles Ready for delivery Description: Dsdpozqlx Rofx Afmsck 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Durum: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection Dsdpfjyvnd Nox Afmsck * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a...

Durum: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved. Dodpfx Aswm I Ipjfmjck

Durum: ikinci el, ilk tescil: 04/2009, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2009, Ek bilgiler: Marka: FAYMONVILLE Model: Telemax Yapı: alçak platformlu (uzatılabilir platform L=13330-17530 mm / Y=1400 mm) Yıl: 01.2008 Süspansiyon: hava süspansiyonu Frenler: tambur Ölçüler: U/G: 13800 mm / 2550 mm Ağırlıklar: dolu/boş: 59000 kg / 11310 kg TÜM AKSLAR DÖNEBİLİR Model yılı: 2007 Süspansiyon tipi: hava Frenler: Tambur Süspansiyon tipi: hava Frenler: Tambur Dedpfxezhvqlo Afmeck Direksiyon: Direksiyon Süspansiyon tipi: hava Frenler: Tambur Direksiyon: Direksiyon = Daha fazla bilgi = Boş ağırlık: 11.310 kg Taşıma kapasitesi: 47.690 kg Azami yüklü ağırlık: 59.000 kg

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container Dcedpfx Afewvzg Rjmok - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Accessories included: - Detachable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin Dodpfx Aek Aht Ujfmeck - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart Dodshlz S Nopfx Afmeck • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° Djdpfx Afsup U Hzomjck - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 Dcjdjya E A Nepfx Afmok - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform: • Loading platform in extendable design with pneumatically operated locking mechanism • Loading platform with approx. 30 mm thick wooden floor • 7 pairs of outward-folding lashing rings (LC 5,000 daN) • 3 pairs of outward-folding lashing rings (LC 10,000 daN) • Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydro-mechanically forced steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with raise/lower valve • Axle tools • Tyres: 385/65 R 22.5 • TPMS (Tyre Pressure Monitoring System) according to ECE R 141 Dodpfsiu Etrsx Afmock Brake System: • WABCO brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin • Connections according to ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Accessories Included: • Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles • 4 wheel chocks with holders mounted on the front wall • 2" kingpin • One galvanized steel front wall approx. 1,600 mm high • Yellow-red air couplings mounted on the galvanized front connection bar • White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red • European reflective plates (red-yellow) on the rear of the trailer • One mudflap at the rear of the trailer • Manual and description • Mounting bracket for a beacon at the rear of the trailer • Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles • 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform • 1 spare wheel holder under the right side of the loading platform in the direction of travel • Electro-hydraulic unit • On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket • Painted sand layer for anti-slip protection on the main beam • 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container • 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm • Access ladder mounted on the right in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel • BEKAMAX central lubrication system (Pico) with removable pump guard • Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition • Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring • Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light • Bracket for beacon on the warning plates • 80 km/h speed stickers on the rear and both sides • Load pressure gauge to determine axle loads, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side Dedpsuqlmnofx Afmsck - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 35.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Loading platform: - Loading platform with extendable design - Loading platform with hardwood planks, approx. 500 mm x 8° rear chamfer - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension straps Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat, single-color in Novagrau (Nova grey) - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not available Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 1x 15-pin Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), with lift/lower function - Hydro-mechanically forced steering - Axle tool kit - Twin tires 235/75 R 17.5 Included accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holders - 2" king pin - Galvanized steel front wall approx. 1600 mm high - White reflective tape as per EU regulations on sides, extension, and rear in red - Loading platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote control via push buttons with single-track axle monitoring - Radio remote control for auxiliary steering - 9 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform Dedpfol Ux Rwsx Afmeck - Galvanized folding supports under the loading platform chamfer - Sliding hook-in rail for ALU ramps at the rear of the vehicle - European reflective signs (red-yellow) at the rear of the trailer - One mudflap at the rear of the trailer - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and on the left/right rear panel each: one holder for warning signs including socket - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (direction of travel) - BEKAMAX (Pico) central lubrication system with standard grease NLHI-2 and removable guard for the pump - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft container, or 1x 40ft container, with additional locking point in the extension for a 45ft container - 4 pairs of cross-mounted stake pocket rails in the loading platform, for plug-in stanchions 100 x 50 mm - Lift axle at the front axle with TEBS-controlled adjustment, depending on current axle load and loading status - Speed stickers 80 km/h at rear and both sides - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Holder for rotating beacon on warning signs - Load pressure gauge for axle load determination, including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then defined visible areas hot-finished metallized with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design: Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of folding external lashing rings (LC 5,000 daN) 2 pairs of folding external lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN) Braking system: Dcodpfx Afjk Eammemsk Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality single-color 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic effect paint possible Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tires: BPW axles, air suspension, disc brakes (377 mm), with lift/lower function The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually Axle tools Tires 435/50 R 19.5 Accessories included: At the front galvanized connection rail, yellow-red air couplings 4 wheel chocks with holders 2" king pin Galvanized steel front wall, approx. 1600 mm high, EN12642-XL White reflective tape to EU standards on the sides, on the extension, and red at the rear Loading area with heavy-duty hardwood flooring 9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right side of direction of travel Galvanized drop-down supports under the loading platform chamfer Sliding hook-in strips for ALU loading ramps at the rear of the vehicle European reflective signs (red-yellow) at the rear of the trailer A mudflap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket 1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel 4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes Lift axle on the front axle with control via TEBS E depending on current axle load and load status Speed stickers 80 km/h at the rear and on both sides Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon Load gauge for determining axle loads including load chart HRM metallization (High Resistance Metallisation) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallised

Durum: yeni, boş ağırlık: 8.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.080 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, renk: gri, Donanım: ABS, hidrolik arka platform, Loading Area: Loading area, extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the loading area for securing straps to be hooked in Dodpfx Aeikyh Hefmock Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and Tyres: BPW axles, air-suspended, with disc brakes (430 mm), equipped with raise/lower function Trailing steering axle with electro-magnetic reversing lock, activated via reverse gear or manually Axle tool kit Tyres: 385/65 R 22.5 Brake System: WABCO brake system compliant with EU regulations, with EBS-E Paintwork: Superior and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc-rich primer High-quality two-component top coat, single-tone in MB 7350 Novagrau tail section metallized and painted in RAL 9010 Metallic paint not possible Steel Construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical System: Electrical system according to EU regulations 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections according to ISO Accessories Included: Front galvanized connection strip with yellow-red air couplings Galvanized steel front bulkhead approx. 1,600 mm high, EN12642-XL 4 wheel chocks with brackets White reflective tape on the sides, on the extension, and rear red tape according to EU regulations European reflector plates at the rear of the trailer Approx. 30 mm thick hardwood floor, enclosed in omega profiles 10 pairs of stake pockets for 100 x 50 mm insert stakes in the outer frame 1 spare wheel carrier beneath the loading area, right side (in driving direction) Manual and operating instructions Bracket for rotating beacon at the rear of the trailer On the gooseneck and rear plate, left and right: bracket for warning signs including socket outlets Central chassis with painted sand coating as anti-slip protection 6 pairs of WADER container pockets in the loading area: for 1x 20ft container, 2x 20ft containers, or for 1x 40ft container in the extension, an additional locking point is provided for a 45ft container 4 pairs of crosswise stake pocket strips mounted in the loading area, for insert stakes 100 x 50 mm One galvanized crosswise bracket underneath the loading area, 2,390 x 720 x 400 mm Access ladder mounted on the right (in driving direction) Lifting axle on the front axle with TEBS E control, depending on the current axle load and current loading status Load gauge for determining axle loads, including load chart HRM metallization of the outer frame: Complete steel construction blasted, then defined visible areas metallized with ZINACOR 850 hot finish

Durum: yeni, boş ağırlık: 10.000 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 51.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Cargo area: - Gooseneck, length approx. 4,100 mm with central beam - Cargo area in extendable design, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps - Pneumatic locking with conical locking pins and reinforced locking positions - Supply lines are protected within the extendable beams and automatically adapt to the respective cargo area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forcibly steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tires: 235/75 R17.5 twin tires Paintwork: - 6-coat final treatment - Entire steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paint with two coats of 2-component acrylic paint, single color in MB 7350 Novagrau, then hollow sections sealed with special wax Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - MAG welding process according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket on the front connection bar - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 cross stake pocket bar mounted in the gooseneck cargo floor for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2" kingpin - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Approx. 32 mm wooden floor encased in aluminum omega profiles on the gooseneck and cargo area - One locking position per extension, approx. every 500 mm - 10 pairs of recessed horizontal lashing rings in the outer frame of the cargo area, foldable outward - 6 pairs of stake pockets recessed in the outer frame of the cargo area for stakes approx. 100x50 mm - 2 cross stake pocket bars installed in the cargo floor of the cargo area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Rear cross member with a bevel approx. 350 mm at 10° - Integrated mounting rail for loose aluminum loading ramps at the rear cross member - 1 pair of drop-leg supports at the rear cross member - Fenders on all axles - Central lubrication system with 1 pump - Remote axle steering operated from front and rear via cable remote control with pushbuttons and single-track monitoring of the axles - Under the gooseneck and on the left and right at the rear cross member, one 7-pin socket each for warning boards - One 7-pin socket at the rear cross member - Container locks "TWIST-LOCKS" in the cargo area for transporting 2x 20ft and 1x 40ft containers - Radio remote control for axle steering in addition to cable remote control, with 2 indicator lights at the receiver for single-track monitoring - 2 axle load gauges + axle load chart - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminum 15%) by hot finis Dcedpfx Afoiuy Nlemok

Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area: - Extendable cargo area design with pneumatically actuated locking - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the external frame of the cargo area for securing belts Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower) - Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually - Axle tools included - Tyres: 435/50 R 19.5 Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Paintwork: - First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K) - High-quality single-tone two-component topcoat (2K) in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Dedpfxji Dwlws Afmeck Electrical System: - Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings on the galvanized front connection panel - 2 wheel chocks with brackets - 2" king pin - Galvanized steel front wall approx. 1,600 mm high - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Cargo floor made of approx. 38 mm thick hardwood - 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area - 1 spare wheel holder under the cargo area on the right in driving direction - Manual and documentation on USB stick - 1 mud flap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket - 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm) - 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container - 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes - 60 km/h speed sticker at the rear - 2 reversing lights mounted on the rear panel - Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light - Mounting bracket for beacon on the warning signs - HRM metalization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Dcodpfxeiu Er Ao Afmjk Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: yeni, boş ağırlık: 11.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.250 mm, süspansiyon: hava, lastik boyutu: 385/65 r 22,5, renk: gri-siyah, Donanım: ABS, Loading Area: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of folding lashing rings (LC 5,000 daN) 3 pairs of folding lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading area for hooking in tension straps (LC 2,000 daN) Axles and Tyres: BPW axles and suspension, all axles hydromechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tool kit 6 tyres 385/65 R 22.5 Brake System: Brake system according to EU regulations with EBS-E (2S2M) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel Construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: Top-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer High-quality 2-component (2K) top coat in single-colour Nova Grey Rear end metallised and painted in RAL 9010 (pure white) Metallic paint not available Included Accessories: One bracket for warning signs, each at the gooseneck and the rear end plate, left and right, including socket Remote steering operated from front and rear using cable remote control with push-buttons, with single-track alignment of the axles Electro-hydraulic power pack 4 wheel chocks with holder on the front bulkhead 2" kingpin One galvanised steel headboard approx. 2,200 mm high Yellow-red pneumatic couplings on the galvanised connection rail at the front White reflective tape per EU regulations on the sides, on the extension, and red at the rear European reflective warning plates (red-yellow) at the rear of the trailer One mud flap at the rear of the trailer Manual and documentation Bracket for revolving beacon at the rear of the trailer Loading surface with approx. 30 mm thick wooden floor embedded in Omega profiles 10 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area 1 spare wheel holder under the loading platform on the right in the direction of travel 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point in the extension is provided for a 45ft container 5 pairs of cross-mounted stanchion pocket rails in the loading area for plug-in stanchions 100 x 50 mm One galvanised bracket crosswise under the loading platform (2,390 x 720 x 400 mm) Entry ladder mounted on the right side in the direction of travel HDPE toolbox 1,200 x 500 x 480 mounted at the front under the loading surface on the left in the direction of travel Lifting axle on front axle, control by TEBS E depending on current axle load and load status Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 general-purpose grease and removable guarding around the pump Red/white reflective tape in the loading platform extension A sand layer painted on the central beam as anti-slip protection Dedpfjhlz Shex Afmock Radio remote control for rear steering in addition to cable remote, with in

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.500 kg, izin verilen dingil yükü (dingil 2): 12.500 kg, izin verilen aks yükü (aks 3): 12.500 kg, ilk tescil: 11/2002, yükleme alanı uzunluğu: 18.600 mm, yükleme alanı genişliği: 2.530 mm, yükleme alanı yüksekliği: 870 mm, toplam uzunluk: 126.000 mm, toplam genişlik: 2.530 mm, toplam yükseklik: 870 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 65 yüzde, renk: diğer, Üretim yılı: 2002, Donanım: ABS, = Diğer seçenekler ve donanımlar = Dcedpfezqmbysx Afmok - 3 aks - Hidrolik - Havalı süspansiyon - Yönlendirilebilir aks - Kampanalı frenler - Merkezi yağlama = Diğer bilgiler = Aks konfigürasyonu Lastik ölçüsü: 235/70 R17.5 Aks markası: BPW Frenler: Kampanalı frenler Arka aks 1: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik dişi: %65 Arka aks 2: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir Arka aks 3: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik dişi: %65 Ağırlıklar Boş ağırlık: 10.920 kg Yük kapasitesi: 49.080 kg Azami toplam ağırlık: 60.000 kg Fonksiyonel Yükleme platformu yüksekliği: 87 cm Durum Teknik durumu: iyi Görsel durumu: iyi Kimlik Plaka: QAMD512

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville SPZ-3A. Yıl: 2012. 9 tonluk SAF akslar. Ağırlık: 9260 kg. Yük kapasitesi: 35.740 kg. Maksimum ağırlık: 45.000 kg. Çekme çubuğu yükü: 18.000 kg. Hidrolik sistem, kamyondan NATO standardına göre çalışır. Çinko kaplama. 8 metre uzatılabilir. Güçlendirilmiş direksiyon, 3 direksiyonlu aks. Hava süspansiyonu. Aradaki mesafe: 125 mm. Platform boyutları: Uzunluk: 13.720 mm. Dcodpszpvf Esfx Afmjk Genişlik: 2540 mm. Yükseklik: 1500 mm. Çekme çubuğu yüksekliği: 1250 mm. Lastikler: 385/65R22,5, %80 durumda. Alman üretimidir! ID No: 568. Heinhuis'in Genel Hüküm ve Koşulları, Heinhuis tarafından yapılan tüm reklamlar, teklifler ve fiyat teklifleri, Heinhuis tarafından yapılan tüm anlaşmalar ve bunlara öncülük eden görüşmeler için geçerlidir. Herhangi bir şekilde verilen yanıtla, Heinhuis'in Genel Hüküm ve Koşullarının geçerliliğini kabul etmiş olursunuz ve bu Genel Hüküm ve Koşulları okuduğunuzu beyan edersiniz. Fiyatlarımız, ihracat için geçerli net fiyatlardır. = Daha Fazla Bilgi = Üretim Yılı: 2012 Boş ağırlık: 9.260 kg Yükleme kapasitesi: 35.740 kg Toplam ağırlık: 45.000 kg Uzatılabilir platform: Evet = Şirket Bilgileri = Daha fazla bilgi için:

Durum: ikinci el, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.600 kg, Donanım: ABS, Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısımda düz tasarımlı kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) Çekilebilir tasarımlı yükleme alanı: -Çekilebilir tasarımlı yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının dış çerçevesindeki, germe bantlarının takılması için oyuklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Dingil destekleri: -24 ton kaldırma kapasitesi (50 ton test yükü) için 2 vitesli şanzımana sahip JOST dingil destekleri (mekanik) Dingiller ve lastikler: -BPW dingiller, iki dingil sabit, iki dingil takip direksiyonlu -Hava süspansiyonlu, tambur frenli, kaldırma/indirme fonksiyonlu -Takip direksiyonlu dingiller, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Lastikler 205/65 R17.5 Fren sistemi: -AB yönetmeliklerine uygun, EBS-E (4S3M) özellikli fren sistemi Çelik konstrüksiyon: -Yüksek mukavemetli, ince taneli çeliklerden yapılmış çelik konstrüksiyon -Çelik kaliteleri: -S355J2+N/S355MC (Akma dayanımı 355 MPa) -S690QL/S700MC (Akma dayanımı 690 MPa) Elektrik sistemi: -AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 volt, ASPÖCK-NORDIK (ASS3) -Ön bağlantı çubuğundaki ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler Boya: -Standart olarak bilye ile püskürtülmüş kaynaklı şasiye uygulanan, iki bileşenli (2K) çinko tozlu astar ile garanti edilen, birinci sınıf ve dayanıklı korozyon koruması Dedpfxew Adkxo Afmjck -Yüksek kaliteli, tek renkli (Novagrau) iki bileşenli (2K) üst kat boya Pakete dahil aksesuarlar: -Ön duvarın önünde bulunan, bir adet yedek lastik ve taşıyıcı -2" Kral pimi -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar -Ön galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvarda bulunan, 4 adet tekerlek takozu ve taşıyıcı -Yükleme alanının eğiminin altında bulunan, galvanizli katlanır destekler -Römorkun arka kısmında, döner lamba için bir tutucu -Galvanizli, her iki tarafta yaklaşık 230 mm kadar uzatılabilen genişleticiler -AB yönetmeliklerine uygun, beyaz reflektör şeridi yanlarda, çekilebilir kısımda ve arkada kırmızı -Kuğu boynunda ve arka sacında, sol ve sağ tarafta, priz dahil olmak üzere uyarı levhaları için birer tutucu -Römorkun arkasında bir çamurluk -Römorkun arkasında, Avrupa reflektör levhaları (Kırmızı-Sarı) -USB bellekte kullanım kılavuzu ve açıklamalar -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında, takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çerçeveler çıkarılabilir, gövdenin uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi -Yükleme alanında 1 adet 20 ft konteyner; yükleme alanında 1 adet 40 ft konteyner; kuğu boynunun üzerinde 1 adet 40 ft konteyner; 2 adet 20 ft konteyner -Yükleme alanının dış çerçevesinde, 100 x 50 mm boyutlarında, takılabilir çerçeveler için 7 çift çerçeve cebi -Ön dingilde, mevcut dingil yüküne ve mevcut yük durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen, kaldırma aksı -Aracın arka kısmında, ALU dayama rampaları için kaydırılabilir bir takma çubuğu -Kuğu boynundaki ve yükleme alanındaki tırtıklı sacların üzerinde, kaymayı önleyici bir güvenlik önlemi olarak, boyanmış bir kum tabakası -Yaklaşık 400 mm kadar uzatılab

Durum: ikinci el, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Her kullanılmış her römork için güncel ve eksiksiz bir inceleme ve fonksiyon raporu sağlanır. Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısmı düz tasarımlı kuğu boynu -3 çift bağlama halkası (LC 5.000 daN) Çekilebilir tasarımlı yük platformu: -Çekilebilir tasarımlı yük platformu -Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) -Yük platformunun ön tarafında yatay konumlandırılmış 1 çift bağlama halkası (LC 10.000 daN) -Gergi bantlarının asılması için yük platformunun dış çerçevesindeki kesikler (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı metal levha kaplama Akslar ve lastikler: -BPW akslar, iki sabit aks, iki yönlendirilebilir aks -Hava süspansiyonlu, tamburlu frenli, kaldırma/alçaltma fonksiyonlu -Yönlendirilebilir akslar, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Aks anahtarı -Lastik ölçüsü 205/65 R17.5 -TPMS lastik basıncı izleme sistemi, ECE R 141'e uygun Ekipman (dahil): -Ön duvarın önünde bir adet yedek lastik ve tutucu -2" Kral pim -Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar -Ön taraftaki galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvara monte edilmiş 4 adet takoz -Yük platformunun eğimli kısmının altında galvanizli katlanabilir destek ayakları -Römorkun arka tarafında çok yönlü bir uyarı lambası için bir tutucu -Her iki tarafta yaklaşık 230 mm uzatılabilir galvanizli genişletmeler -AB yönetmeliklerine uygun, yanlarda beyaz reflektör şeridi, çekilebilir kısımda ve arkada kırmızı Dedoxwnfmepfx Afmjck -Kuğu boynunda ve arka sacda, her iki tarafta da uyarı levhaları için tutucu ve priz dahil -Römorkun arka tarafında bir çamurluk -Römorkun arka tarafında Avrupa reflektör levhaları (kırmızı-sarı) -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çıtalar çıkarılabilir. Yapının uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi: -Yük platformunda 1 adet 20 ft'lik konteyner -Yük platformunda 1 adet 40 ft'lik konteyner -Kuğu boynunun üzerinde 1 adet 40 ft'lik konteyner -2 adet 20 ft'lik konteyner -1 çift WADER konteyner cebi ile destek ayağı (maksimum yük kapasitesi yaklaşık 20.000 kg) -Yük platformunun dış çerçevesinde 100 x 50 mm boyutlarında 7 çift çıta cebi -Ön aks üzerinde, mevcut aks yüküne ve yükleme durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen hareketli aks -Aracın arka tarafında ALU rampa için hareketli bir montaj çubuğu -Kuğu boynunda ve yük platformundaki tırtıklı metal levhalar üzerinde, kaymayı önlemek için entegre edilmiş bir kum tabakası -Yaklaşık 423 x 423 mm boyutlarında, konumsal bir lamba ile donatılmış, yaklaşık 400 mm kadar uzatılabilen dört adet uyarı levhası -Uyarı levhalarında çok yönlü uyarı lambası için bir tutucu -Arka tarafta ve her iki tarafta 80 km/h hız etiketi -Aks yüklerini belirlemek için yük manometresi ve yük şeması dahil

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Dcedpszahp Sefx Afmjk Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Dcodpfeg Sk Tvox Afmjk Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh