Alçak şasi dorse

MÜLLER-MITTELTAL TS 3 RM 30,0

Durumu: yeni, makine/araç numarası: 1, boş ağırlık: 10.200 kg, azami yük ağırlığı: 28.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 850 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: koyu kırmızı, Üretim yılı: 2021, Donanım: ABS, Brand new CEYLAN low-loader SEMI-TRAILER, 3 axles with 1st axle liftable and 3rd axle steered, ABS, lower deck measuring 10m in length x 85cm deck height from the ground, total length 13.70m, side stanchions, lateral extensions, 10-ton RUD lashing rings each, full-width double electro-hydraulic ramps, prearrangement for electric winch, WARRANTY - IMMEDIATE AVAILABILITY SUBJECT TO PRIOR SALE, INTERDRIVE SRL - PARMA Cgedpfsilglnex Ah Den

Durumu: yeni, güç: 184 kW (250,17 bg), yakıt türü: dizel, toplam ağırlık: 11.990 kg, renk: gri, vites türü: otomatik, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.550 mm, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, park ısıtıcısı, SHORT-TERM AVAILABILITY CERTIFIED ACCORDING TO VDI 2700, 8:1, 8:2* Photos do not show the original vehicle. The original trailer is equipped with a tandem axle. Updated photos will follow. Vehicle Transporter MAN TGL 12.250 4x2 BL: * Rear axle air suspension * PTO (Power Take-Off) * Cab with 2 individual seats * Sleeping compartment * Auxiliary heater * Radio * Digital tachograph 4.1 * GSR 2 equipment Car Transport Body DS12 [MODULO]: Csdpfx Ahjfq Ncke Degn * Double-deck body for transporting 2 cars or 1 van/motorhome * Lower deck loading area approx. 600 x 255 cm * Lifting platform approx. 400 x 240 cm * Winch with remote and wired control * Galvanized body Trailer: * Air-braked BLYSS trailer for 3 cars * Tandem axle with twin tyres, gross vehicle weight 18,000 kg * Payload approx. 13,500 kg * Loading area approx. 900 x 255 cm * Rear extension approx. 150 cm * Lifting platform approx. 450 x 240 cm * BPW axle * ABS * Trailer with perforated drive-on plates * Vehicles securable in any position as per DIN * Galvanized trailer Optional: * Tandem axle with twin tyres, gross vehicle weight up to 18,000 kg * Payload up to approx. 13,500 kg Load securing equipment also available from us: * Lashing and tension straps * Cargo bars * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Errors and prior sale excepted. No liability for printing or input errors.

Durumu: yeni, makine/araç numarası: 1, boş ağırlık: 11.000 kg, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 870 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: koyu kırmızı, Üretim yılı: 2020, Donanım: ABS, New Ceylan low-loader trailer, ready for registration, 3 axles with 1st axle liftable and 3rd axle steering, EBS, full-width double electro-hydraulic ramps, wideners, winch prearrangement, low deck height 87 cm, bed length 9.95 m, total length 13.65 m, RUD lashing rings, immediate delivery subject to prior sale - warranty - OFFICIAL DEALER INTERDRIVE SRL - PARMA. Cgjdsh S Aw Rjpfx Ah Don

Durumu: kullanılmış, kilometre: 830.000 km, güç: 353 kW (479,95 bg), ilk tescil: 01/2007, yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, bir sonraki muayene (TÜV): 12/2025, frenler: retarder, renk: kırmızı, vites türü: mekanik, emisyon sınıfı: Euro 4, Donanım: ABS, elektronik denge programı (ESP), klima, kompresör, navigasyon sistemi, park ısıtıcısı, vinç, Volvo FM 480 8x2 Flatbed Truck with Crane FASSI F800XP First Registration: 01.2007 Mileage: approx. 830,000 km Engine: 353 kW / Displacement 12,780 cc / EURO 4 (D13A480 EC06) Transmission: ZF manual Suspension: Leaf/Air with lift and steering axle Wheelbase: 5,100 mm Length: 9,530 mm / Width: 2,550 mm Payload: 10,150 kg Gross vehicle weight: 32,000 kg Technically permissible: 44,000 kg Axle loads: 8,000 kg + 8,000 kg + 11,500 kg + 7,500 kg Tow hitch Bed dimensions: 5,350 mm length / 600 mm sidewalls, 1,200 mm loading height / driving height Other features: Air conditioning, auxiliary heater, retarder, cab: sleeper cab with high roof, bed and refrigerator, electric windows & mirrors, and more. Loading crane: Fassi F800 BXP.26 6x hydraulic extensions + 1x manual extension 4-point stabilizers + Radio remote control 1st extension: 6.00 m = 10,940 kg 2nd extension: 7.75 m = 8,255 kg 3rd extension: 9.65 m = 6,470 kg 4th extension: 11.75 m = 5,220 kg 5th extension: 13.90 m = 4,350 kg 6th extension: 16.15 m = 3,655 kg 7th extension: 18.60 m = 3,000 kg (manual) Additional equipment lists, data or photos available on request! All information subject to change/errors excepted! Information in online listings is non-binding and does not constitute guaranteed characteristics. The seller is not liable for mistakes, typing errors and data transmission errors. Subject to prior sale and changes. We are continuously buying and selling, offering trade-ins and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles. Codpfx Ahsxb H Sao Djgn

Durumu: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Accessories included: - Detachable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon Cgjdpfxjk Aht Uj Ah Den

Durumu: yeni, azami yük ağırlığı: 65.400 kg, toplam ağırlık: 93.400 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Pos. 1 Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data are only valid when using a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights (at 80 km/h) Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Cjdpfswg N N Isx Ah Degn Gross vehicle weight: 94,000 kg Unladen weight: approx. 29,600 kg Payload: approx. 64,400 kg (*depending on load chart / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Total train length: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Steering radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: opposite-steering Flatbed (external frame) single extending with separation point Length x width: 7,000 mm x 2,750 mm Extensible by / up to max.: 3,400 mm / 10,400 mm Bed height: 300 mm Loading height (loaded): approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Durumu: kullanılmış, kilometre: 505.641 km, güç: 368 kW (500,34 bg), ilk tescil: 12/2017, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 03/2026, frenler: retarder, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2017, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, MAN TGX 18.500 4x2LLS-U VIN: M775429 Chassis / Attachments: * Full air suspension * Wheelbase: 3,600 mm * Tyres: Front: 355/50 R 22.5 / Rear: 295/60 R 22.5 * Condition: Front approx. 70%, Rear approx. 60% * 2 x 480 L aluminium diesel tanks * 1 x AdBlue tank Engine / Transmission: * 368 kW / 500 hp / 12,419 cm³ / Euro 6c * ZF intarder * ZF automatic transmission * Differential lock Cab Equipment: * XXL cab * 2 beds * Auxiliary heater * Automatic climate control * Stationary air conditioning * Refrigerator * Hands-free system * Radio * AUX, Bluetooth, USB * Navigation * Lane guard system (LGS) * Adaptive cruise control (ACC) * Emergency braking assistant Weights: * Gross vehicle weight: 18,000 kg * Payload: 9,861 kg * Unladen weight: 8,139 kg Other: * 1 previous owner * German registration * Main inspection (HU) valid until 03/2026 New main inspections, safety tests, or weight downgrades/upgrades can be arranged upon request. We are also happy to assist you in obtaining export/transfer license plates, and we can arrange delivery of your purchased vehicles within Germany. Contact us! We speak German, English, and Russian! No liability for printing or typographical errors, changes, prior sale, and mistakes excepted! Your RL-Leible Team --- Who are we? Leible Commercial Vehicles is a family-owned company based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles specialises in the sales of new and used commercial vehicles. Our 11,000 m² site offers a large selection of vehicles. Our business philosophy is characterised by fairness and integrity. Customer satisfaction is very important to us, which is why we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them throughout the purchase or sale of vehicles. See for yourself! Our service for you: Cjdpsxpayajfx Ah Degn Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to help you organise special transports. Temporary/export license plates We are happy to assist in obtaining export or short-term license plates. Customs formalities We are happy to assist you with customs procedures.

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Cedpfxsw Etd Tj Ah Dogn Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durumu: kullanılmış, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. Cedpfx Ahjwta Ale Dsgn WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durumu: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side Cgodpfx Ahoup U Hzs Dsn - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram