Yarı römork

FLIEGL Hangler SDS-H 480 Mega-Z Teleskop RH110 Plateau

Gross weight: 35,000 kg / 48,000 kg
Unladen weight: 9,950 kg
Payload: 25,050 kg / 38,050 kg
Overall length: 21,000 mm
Loading length: loading platform approx. 13,500 mm / max. loading length 21,000 mm
Width: 2,550 mm
Loading height: 950 mm

Additional information:
plus pre-carriage / staging ex stock location 26639 Wiesmoor: €1,280.00

Rear support telescopic
4 wheel chocks with holder
4 pairs of recessed container locks in the floor for 1x 40 ft. container or 2x 20 ft. containers
1 spare wheel carrier for 1 spare wheel, with wheel fastening kit, basket design
11 pairs of stake pockets recessed in the outer frame, suitable for plug-in stakes 80x50 mm, flush mounted in the outer frame, each with opening for lashing straps or chain hooks
20 plug-in stakes, B=80/ D=50/ L=1500 mm
1 plastic toolbox
3 pairs of lashing eyes, each rated at 3.5 t, fitted in the side frame – in the neck area
Rcsdpfx Agoumha Nsyeh
13 pairs of folding lashing rings, each rated at 10,000 daN, swivelling freely in the side frame profile (also suitable for oversize securing)
1 pair of folding lashing rings, each rated at 10,000 daN, mounted laterally in the intermediate support
Air suspension with raise and lower function
1st axle automatic lift axle, additionally with forced lowering including starting aid, operated by control button at the trailer, not operable from driver’s cab
with lift & lower valve + auto-reset function

Wheels and tyres:
235 / 75 R 17.5"
Steel twin wheels, factory silver
24 Volt multi-chamber lights, yellow LED side lighting
2 white front marker lights in LED
2 rear white/red position marker lights in LED
2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable
2 additional LED work lights at rear, switched by reverse gear
1 removable rotating beacon on underrun protection
1 x 7-pin socket at rear
6 side sockets, 2x bulkhead, 2x support legs, 2x rear frame (left & right) 7-pin
2 work lights, recessed at top in front wall incl. switch
2 pairs of oversize marker boards, each with 2 LED marker lights per board, extendable sideways up to 3,500 mm; boards can also be plug-mounted on loading area (width adjustable in steps)
Fixed steel front wall, 1,200 mm high, with reinforced steel corner posts, straight side entry, no chamfered corners
2 lashing holes inside and outside at the front wall top corners
Front frame hot-dip galvanized + outer frame (exposed area) finished in RAL 3002 Carmine red
Rear frame hot-dip galvanized + outer frame (exposed area) finished in RAL 3002 Carmine red
Front wall RAL 3002 Carmine red

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.