Tank

Fruehauf Bitumen tank inox 31 m3 / 1 comp + mixer & engine

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2026, toplam genişlik: 2.550 mm, toplam yükseklik: 1.350 mm, Üretim yılı: 2025, Donanım: ABS, Container Chassis 20FT: Fifth wheel height: 1180 mm (unladen, air-suspended tractor unit) Suitable for the transport of containers: - 1 x 20FT ISO - 1 x 20FT (7150) Swap body - 1 x 20FT (7450) Swap body - 1 x 20FT (7820) Swap body Three-axle unit SAF INTRA DISC PLUS SBS2220, with disc brakes (large discs 430 mm). INTRA air suspension with steel suspension brackets. The axles are air-suspended, with axle 1 as a lift axle, controlled automatically via EBS. 6 aluminium rims, size 22.5 x 11.75, brand TIA, polished finish, ET 120 mm. WABCO EBS-E braking system, type 2S/2M (ABS on 1 axle), with RSS system (roll stability) and pneumatic hand parking brake on 2 axles, compliant with regulations. Tyre pressure monitoring system WABCO OptiTire (TPMS). Landing gears JOST MODUL B, version with plates and compensating feet (S), load capacity 2x12,000 kg, mechanically operated. 1 PVC toolbox (1,040x490x480 mm), mounted on the right. Stainless steel drip tray with removable aluminium cover plate. On both sides of the drip tray, left and right, a working platform covered with aluminium safety grating. Left and right, behind the 20FT connection above the third axle, an aluminium walkway. Between the longitudinal beams: 2 PE hose pipes, @ 160 mm, length 6,200 mm, with PE end caps at the front. At the rear, the hose pipes are equipped with separate, lockable stainless steel caps (dia. 160 mm). Rear: 1 foldable ADR sign. Vehicle specification according to ADR: EX/II + EX/III + FL + AT Container: Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 liters Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: –40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Ends: 1.4402 (316L), 4.2 mm, hot rolled, polished Baffle plates: 4× vertical, CVC-shaped, corrugated, welded to 70% Internal finish: degreased, pickled, passivated, neutralized Ladder: stainless steel, rear right, anti-theft Walkway: aluminium, non-slip, 475 mm, with cross steps Handrail: foldable, telescopic, anti-theft Stacking: up to triple stack Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE Dedjyqiy Tspfx Aldjcg Inspection openings: 3× Ø300 mm, 316 stainless steel, 4-bolt Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & gauge Air line: 1.5", with ball, safety & non-return valves, gauge operable from below Vacuum valve: 2" BSP, –0.21 bar Bottom valve: 3", with cable remote closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: analogue, –40°C to +160°C Insulation: - 50 mm mineral wool (tank & ends) - PU foam under stainless steel straps Cladding: - Shell: 4× 1.8 mm GRP panels Marking: 3× holders for Edgar Weber flip boards, 1× Kemmler holder Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important note – Important information: Despite thorough verification of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the platform providers. Therefore, we point out that all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information to initiate a contract. The information provided here is supplied without guarantee and does not represent warranted characteristics