Konteyner taşımacılığı

Van Hool 20FT, 66° Tipping-chassis, ADR (EX/II, EX/III, ...

Durumu: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, 7.82 BDF Krone smooth wall swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s color (standard RAL shade). The subframe and parts of the support legs are not painted; once set down, these areas are not visible from the ground. Set-down height: 1120 mm The swap body is watertight and the roller door operates smoothly. External dimensions (approx. in mm): Length: 7820, Width: 2550, Height: 2925 Internal dimensions (approx. in mm): Length: 7700, Width: 2480, Height: 2700 Door openings (in mm): Width: 2370, Height: 2600 Itodpfxevv R Ifj Acyjd Lashing: keyhole slots Maximum gross weight for registration/operation: 16,000 kg Rail-transport suitable, including railway certification according to DIN EN 13044 Rail approval Code XL (approved for rail transport at over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal members with crossmembers and outer frame welded construction, with lower guide tunnel 4 container corner castings on 20’ base, symmetrical overhangs 4 grab pocket rails 7 pairs of lashing rings on the side in rubbing rail Floor Type: BO WST 27 mm thick, waterproof bonded phenolic plywood floor, strength according to DIN EN 283; suitable for maximum floor loads up to 5,460 kg forklift axle load 2 front ventilation openings in the floor (according to GGVS) Box body Structure type: AB WST Internal height: 2700 mm Portal opening height (clear): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed construction Smooth side walls made of galvanized steel cassette panels Roof made of trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilation vents per side wall Rubbing rail and side wall with cutouts; internal 3-sided forklift collision protection, approx. 300 mm high Front wall smooth, made of galvanized steel cassette panels Front wall inside: 21 mm phenolic plywood panel, 750 mm high, above this a continuous 12 mm phenolic plywood panel Front wall outside: top with setback (optimized for cornering) Rear wall with roller door (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel collision protection for roller guide rail Side walls completely lined inside with keyhole steel sheets 13 recessed steel rails left and right, for double-deck load beams 13 LM load beams for double-deck loading Steel horizontal collision protection at rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to continuous product improvements.

Durumu: kullanılmış, azami yük ağırlığı: 29.690 kg, toplam ağırlık: 37.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2002, Üretim yılı: 2002, Donanım: ABS, Curtain-sided low-loader Meusburger MPG 3 Dimensions: Length 13.90 m, Width 2.55 m - 3.50 m (rear stanchions), Height 4 m Loading dimensions: Platform height 80 cm, inner height of recessed deck 3.20 m, recessed deck to gooseneck 67 cm, inner height gooseneck 2.53 m Condition: Good for its age Tyres: 205/65R17.5, 50-70% tread remaining Iedpfx Aswrvubecystd

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, renk: beyaz, 7.45 BDF Krone Jumbo Smooth-Sided Swap Body, used Exterior color: White Parking height adjustable from 920–1320 mm. The swap body is watertight and the roller shutter door operates smoothly. Forklift pockets Stackable Approximate exterior dimensions in mm: Length 7450, Width 2550, Height 2950 Iodpfxjuvibtj Acystd Approximate interior dimensions in mm: Length 7289, Width 2470, Height 2700 Door openings in mm: Width 2370, Height 2550 Lashing: Keyhole Weight: Tare 3340 kg Maximum payload: 12,660 kg Maximum gross weight: 16,000 kg Floor load capacity: 5,460 kg Volume capacity: 49.74 m³ Pallet capacity (dimensions in mm): Euro (800x1200) 18 Metric (1000x1200) 14 Mesh box (835x1240) 16 “Aussie” (1170x1170) 12 Note: Actual dimensions and certain specifications may vary slightly from the above details due to ongoing product improvements.

Durumu: kullanılmış, Üretim yılı: 2007, konteyner uzunluğu: 24 fit, renk: beyaz, toplam ağırlık: 16.000 kg, boş ağırlık: 2.850 kg, yükleme alanı genişliği: 2.480 mm, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı yüksekliği: 2.530 mm, makine/araç numarası: 476575, BDF swap body / swap container with roller shutter door * Smooth steel box body * Length: 7.45 m * Roller shutter – fully overhauled, in perfect working order! * Interior with keyhole panels Ijdpfxsnhlkce Acyetd * Lashing eyes recessed in the side wall * Anti-slip phenolic plywood floor * Neutral white WITHOUT lettering! * With paint chipping on side panels and roller door * Light rusting on frame and superstructure * Support height: 1.32 m * Clearance height at roller door: 2,370 mm Multiple units available! Nationwide delivery possible! We always have a large stock of various manufacturers and specifications available for sale or RENT! All prices are net plus statutory VAT!

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, renk: beyaz, 7.82 BDF Krone Smooth-Sided Swap Body, used (Multiple units available) Exterior color: white Parking height: 1320 mm The swap body is waterproof and the roller door operates smoothly. Itsdpfx Aowahr Ijcyjd Approximate external dimensions in mm: Length 7820 Width 2550 Height 2750 Approximate internal dimensions in mm: Length 7650 Width 2480 Height 2500 Door openings in mm: Width 2370 Height 2600 Lashing: Keyhole type Weight: Tare 3000 kg Maximum payload: 13,000 kg Maximum gross weight: 16,000 kg Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802032235, boş ağırlık: 4.983 kg, azami yük ağırlığı: 33.017 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 12/2025, süspansiyon: hava, lastik boyutu: 385/55 R22.5", renk: açık yeşil, Üretim yılı: 2022, Chassis semitrailer for containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: - Rear extension retracted: 1 x 20-foot or 1 x 30-foot flush with rear - Locking positions: new design for improved fifth-wheel load with 20’ containers - Rear lighting recessed and protected within the rear section - Mid-telescopic, 1st stage, rear extension extended to 1st stage: 2 x 20-foot or 1 x 40-foot without gooseneck tunnel - Mid-telescopic, 1st stage, rear extension extended, 1 x 40-foot with gooseneck tunnel - Mid-telescopic, 2nd stage, rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang - Mid-telescopic, 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45-foot with extra-long gooseneck tunnel and bevelled corners, central tube frame as telescoping system with bolt locking Itsdpsww Iczefx Acyjd Transport of loaded tank containers excluded. With adjustable rear height in “hot-dip galvanized version” and foldable central container supports for containers without tunnel Removable front container guides Front cross member with latest Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendible (for 45-foot containers with long tunnel) Rear extension mounted on rollers, with manual hand crank 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without load compensation 2 wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45-foot containers Full-width rear mud flap (not in combination with forklift holder) Half-shell fenders With EC-compliant anti-spray mud flaps Rear impact protection Spare wheel holder for 1 E-wheel, with fastening kit 1 toolbox for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder, 6 kg)

Durumu: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, Axle make: BPW Brakes: Disc brakes Suspension: Air suspension Iodpex Dbh Uofx Acyjtd Unladen weight: 3,540 kg Payload: 35,460 kg Gross vehicle weight (GVW): 39,000 kg Technical condition: Good Visual condition: Good For further information, please contact Arie. ADR: EX/II / EX/III / FL / AT

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2003, toplam uzunluk: 9.060 mm, toplam genişlik: 2.500 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, dingil mesafesi: 7.450 mm, Üretim yılı: 2003, Donanım: ABS, = Additional Options and Equipment = - ADR - EBS Ijdpfx Acsv D Ibloyotd - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Nice 2005 Van Hool 20FT tipper chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axles, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V system, unladen weight: 5,300 kg, max gross weight: 39,000 kg, 385/65-R22.5 tires (L: 4/11/12mm; R: 9/11/9mm), Dutch registration = Additional Information = Axle Configuration: Tire size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 25%; Tire tread right: 55% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 70% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 55% Weights: Unladen weight: 5,300 kg Payload: 33,700 kg gross vehicle weight: 39,000 kg Operational data: Body manufacturer: Van Hool 3B2013 Condition: Technical condition: very good Visual condition: very good Identification: Registration number: OH-91-FS Further information: Please contact Arne Honingh for more information.

Durumu: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck: - Hydraulic gooseneck, height-adjustable and detachable - Length approx. 3,650 mm - Numerous lashing points - For tractor units: 6x4 or 8x4 3-Axle Compact Front Bogie: - Hook mounts at the front and rear - Bogie length x width: approx. 3,560 mm x 2,850 mm - Numerous lashing points Itsdpfx Acjwhywfjyod Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width: approx. 7,150 mm x 2,850 mm - Beam height x width: approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of drop-forged lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings 5-Axle Rear Bogie: - Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back - Bogie length x width: approx. 6,840 mm x 2,850 mm - Numerous lashing points Pendulum Axles and Tires (Front and Rear Bogies): - "PENDEL-AXLE", all axles with hydromechanical forced steering - Hose rupture valve on equalizing cylinder with automatic reset - Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position - Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tires: 285/70 R19.5 Remote Steering: - Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring - Socket for operating the remote steering on the gooseneck - Cable remote control with push-buttons and axle tracking monitoring included Accessories Included: - Galvanized front connector bar with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks with brackets - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Gantry with winch for spare wheel on the front of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings - White reflective tape to EU specs on the sides and extensions, red at the rear - Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized - Gooseneck operating lever protected by a folding cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie - Variomax tool kit - Multi-couplings for hydraulics in the area of the lowbed hook mounts - Front bogie with separate air connection for pneumatic tools - Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings - Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel decks with approx. 12 mm thick rubber surface - Two INOX toolboxes 855 x 340 x 390 mm - Wireless remote control for remote steering in addition to cable control - Slip-resistant sanded surface coating - Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery